SIST EN 13035-11:2007/kFprA1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines

Type 2 Amendment.

Maschinen und Anlagen zur Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 11: Bohrmaschinen

Machines et installations pour la production, le façonnage et la transformation du verre plat - Exigences de sécurité - Partie 11 : Machines de perçage

Stroji in obrati za proizvodnjo, obdelavo in predelavo ravnega stekla - Varnostne zahteve - 11. del: Vrtalni stroji

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Oct-2009
• ICS: 25.080.40 - Drilling machines
• ICS: 81.100 - Equipment for the glass and ceramics industries
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 08-Oct-2019
• Due Date: 13-Oct-2019
• Completion Date: 08-Oct-2019
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 13035-11:2006/FprA1 - Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines

Relations

• Amends: SIST EN 13035-11:2007 - Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
• Effective Date: 01-Oct-2009
• Consolidated By: SIST EN 13035-11:2007+A1:2010 - Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 13035-11:2007+A1:2010 - Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 13035-11:2007+A1:2010 - Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
• Effective Date: 01-May-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13035-11:2007/kFprA1:2009
01-oktober-2009
Stroji in obrati za proizvodnjo, obdelavo in predelavo ravnega stekla - Varnostne
zahteve - 11. del: Vrtalni stroji
Machines and plants for the manufacture, treatment and processing of flat glass - Safety
requirements - Part 11: Drilling machines
Maschinen und Anlagen zur Herstellung, Be- und Verarbeitung von Flachglas -
Sicherheitsanforderungen - Teil 11: Bohrmaschinen
Machines et installations pour la production, le façonnage et la transformation du verre
plat - Exigences de sécurité - Partie 11 : Machines de perçage
Ta slovenski standard je istoveten z: EN 13035-11:2006/FprA1
ICS:
25.080.40 Vrtalniki Drilling machines
81.100 2SUHPD]DVWHNODUVNRLQ Equipment for the glass and
NHUDPLþQRLQGXVWULMR ceramics industries
SIST EN 13035-11:2007/kFprA1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13035-11:2007/kFprA1:2009

---------------------- Page: 2 ----------------------

SIST EN 13035-11:2007/kFprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 13035-11:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
July 2009
ICS 81.100

English Version
Machines and plants for the manufacture, treatment and
processing of flat glass - Safety requirements - Part 11: Drilling
machines
Machines et installations pour la production, le façonnage Maschinen und Anlagen zur Herstellung, Be- und
et la transformation du verre plat - Exigences de sécurité - Verarbeitung von Flachglas - Sicherheitsanforderungen -
Partie 11 : Machines de perçage Teil 11: Bohrmaschinen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 13035-11:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13035-11:2006/FprA1:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13035-11:2007/kFprA1:2009
EN 13035-11:2006/FprA1:2009 (E)
Contents Page
Foreword .3
1 Modification to the Foreword .4
2 Modification to the Scope .4
3 Modification to Clause 2, Normative references .4
4 Modification to Clause 4, List of significant hazards .5
5 Modification to 5.1, General .6
6 Modification to 5.4, Guards and screens .6
7 Modification to 5.5.1, General .7
8 Modification to 5.6, Emergency stop .7
9 Modification to 5.7, General safeguarding principles .7
10 Modification to 5.8, General maintenance requirements .7
11 Modification to 5.9, Electrical and pneumatic equipment and unexpected start-up .8
12 Modification to 5.10, Noise .8
13 Modification to 7.2.2 .8
14 Modification to 7.3, Accompanying documents (in particular: Instruction Handbook) .8
15 Modification to 7.4, Marking .9
16 Addition of Annex B .9
17 Addition of Annex ZB, Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC . 11
18 Modification to the Bibliography . 11

2

---------------------- Page: 4 ----------------------

SIST EN 13035-11:2007/kFprA1:2009
EN 13035-11:2006/FprA1:2009 (E)
Foreword
This document (EN 13035-11:2006/FprA1:2009) has been prepared by Technical Committee CEN/TC 151
“Construction equipment and building material machines – Safety”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
3

---------------------- Page: 5 ----------------------

SIST EN 13035-11:2007/kFprA1:2009
EN 13035-11:2006/FprA1:2009 (E)

1 Modification to the Foreword
th
Replace the 4 paragraph with the following one:
“For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.”
2 Modification to the Scope
st
In 1.2, replace the 1 sentence with the following:
1.2 "This European Standard deals with the significant hazards, hazardous situations and events relevant
to drilling machines for flat glass when they are used as intended and under the conditions of misuse which
are reasonably foreseeable by the manufacturer (see Clause 4).”
nd
In 1.2, add after the 2 sentence the following new sentence:
“Safety requirements and/or protective measures are given in Clause 5. When references are made to B level
standards such as EN 953, EN 983, EN 999, EN 1037, EN 1088, EN 60204-1, EN ISO 13850 and EN ISO
13857, the manufacturer should carry out an adequate risk assessment for the requirements thereof where
choice is necessary.”
3 Modification to Clause 2, Normative references
Delete:
"EN 294:1992, Safety of machinery — Safety distance to prevent danger zones being reached by the upper
limbs
EN 418:1992, Safety of machinery — Emergency stop equipment, functional aspects — Principles for design”
“EN 954-1:1996, Safety of machinery — Safety related parts of control systems — Part 1: General principles
for design”
“EN 1050:1996, Safety of machinery – Principles for risk assessment”
Delete references to EN 999:1998 and EN 1037:1995 and move them to the Bibliography.
Update:
EN 60204-1:1997 as follows: “EN 60204-1:2006, Safety of machinery — Electrical equipment of machines —
Part 1: General requirements (IEC 60204-1:2005, modified)”
EN 61310-1:1995 as follows: "EN 61310-1:2008, Safety of machinery — Indication, marking and actuation —
Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007)"
Add:
“EN ISO 3747:2000, Acoustics — Determination of sound power levels of noise sources using sound pres-
sure — Comparison method for use in situ (ISO 3747:2000)
EN ISO 4871:1996, Acoustics — Declaration and verification of noise emission values of machinery and
equipment (ISO 4871:1996)
4

---------------------- Page: 6 ----------------------

SIST EN 13035-11:2007/kFprA1:2009
EN 13035-11:2006/FprA1:2009 (E)
EN ISO 11201:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission
sound pressure levels at a work station and at other specified positions — Engineering method in an essen-
tially free field over a reflecting plane (ISO 11201:1995)
EN ISO 11202:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission
sound pressure levels at a work station and at other specified positions — Survey method in situ
(ISO 11202:1995)”
“EN ISO 13849-1:2008, Safety of machinery — Safety-related parts of control systems — Part 1: General
principles for design (ISO 13849-1:2006)
EN ISO 13850:2008, Safety of machinery — Emergency stop — Principles for design (ISO 13850:2006)
EN ISO 13857:2008, Safety of machinery - Safety distances to prevent hazard zones being reached by upper
and lower limbs (ISO 13857:2008)"
4 Modification to Clause 4, List of significant hazards
nd
Delete the 2 paragraph.
Replace Table 1 with the following:
5

---------------------- Page: 7 ----------------------

SIST EN 13035-11:2007/kFprA1:2009
EN 13035-11:2006/FprA1:2009 (E)
"Table 1 — List of significant hazards
Preventive
Hazards  Danger zone/dangerous items measures: see
clause
4.1 crushing during down stroke of the clamp 5.4; 5.7; 7.3.8
4.2 cutting or severing during drilling operation 5.4; 5.7
4.3 entanglement during drilling and glass positioning opera- 5.4; 5.7
tions
4.4 drawing-in or trapping during drilling and glass positioning opera- 5.4; 5.7
tions
4.5 impact during down stroke of the clamp 5.4; 5.7; 7.3.8
4.6 friction or abrasion during drilling operation 5.4; 5.7
4.7 electrical direct or indirect contact 5.5; 5.8; 5.9;
7.3.5
4.8 resulting from contact with or inha-coolants 5.2; 7.3.6
lation of harmful fluids, gases,
mists, fumes and dusts
4.9 biological and micro-biological (vi-coolants 5.2; 7.3.6
ral or bacterial)
4.10 neglected use of personal protec- all operational phases of the machine 5.8; 7.3.3
tion equipment
4.11 impossibility of stopping in the best during operation of the machine 5.6
possible conditions
4.12 ejected objects or fluids during drilling operation 5.2; 5.4
4.13 unexpected start-up by restoration all dangerous movements 5.8; 5.9
of energy supply after interruption,
errors made by th
...