kSIST FprEN 474-11:2017
(Main)Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors
Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors
This document, together with part 1, deals with all significant hazards for earth-moving machinery - earth- and landfill compactors when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN 474-1. This document does not repeat the requirements from prEN 474-1, but adds or replaces the requirements for application for earth moving machinery - earth- and landfill compactors.
Rammer compactors and vibratory plates are dealt with in EN 500-1 and EN 500-4.
This European Standard is not applicable to earth- and landfill compactors manufactured before the date of publication of this European Standard by CEN.
Erdbaumaschinen - Sicherheit - Teil 11: Anforderungen für Erd- und Müllverdichter
Dieses Dokument behandelt zusammen mit Teil 1 alle signifikanten Gefährdungen für Erdbaumaschinen — Erd- und Müllverdichter, wenn sie bestimmungsgemäß verwendet werden sowie unter den vernünftigerweise vom Hersteller vorhersehbaren Fehlanwendungen für die gesamte Lebensdauer der Maschine (siehe Abschnitt 4).
Die Anforderungen gelten ergänzend zu den allgemeinen Anforderungen der prEN 474-1. Dieser Teil wiederholt nicht die Anforderungen der prEN 474-1, sondern ergänzt oder ersetzt diese für den Einsatz von Erdbaumaschinen — Erd- und Müllverdichter.
Explosionsstampfer und Vibrationsplatten werden in EN 500-1 und EN 500-4 behandelt.
Diese Europäische Norm ist nicht anzuwenden für Erd- und Müllverdichter, die vor der Veröffentlichung dieser Europäischen Norm durch CEN hergestellt wurden.
Engins de terrassement - Sécurité - Partie 11 : Prescriptions applicables aux compacteurs de remblais et de déchets
Le présent document traite, avec la partie 1, de tous les phénomènes dangereux significatifs liés aux engins de terrassement et aux compacteurs de remblais et de déchets, lorsqu'ils sont utilisés normalement et dans les conditions de mauvaise utilisation raisonnablement prévisibles par le fabricant, associés à toute la durée de vie des machines (voir Article 4).
Les prescriptions figurant dans la présente partie sont complémentaires des prescriptions communes présentées dans la norme prEN 474-1. Le présent document ne répète pas les prescriptions de la norme prEN 474-1 mais en ajoute ou en remplace certaines pour les engins de terrassement et les compacteurs de remblais et de déchets.
Les pilonneuses et les plaques vibrantes sont couvertes par les normes EN 500-1 et EN 500-4.
La présente Norme européenne ne s’applique pas aux compacteurs de remblais et de déchets fabriqués avant sa publication par le CEN.
Stroji za zemeljska dela - Varnost - 11. del: Zahteve za kompaktorje zemlje in odpadkov
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN 474-11:2017
01-junij-2017
Stroji za zemeljska dela - Varnost - 11. del: Zahteve za kompaktorje zemlje in
odpadkov
Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill
compactors
Engins de terrassement - Sécurité - Partie 11 : Prescriptions applicables aux
compacteurs de remblais et de déchets
Ta slovenski standard je istoveten z: prEN 474-11
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
oSIST prEN 474-11:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 474-11:2017
---------------------- Page: 2 ----------------------
oSIST prEN 474-11:2017
DRAFT
EUROPEAN STANDARD
prEN 474-11
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2017
ICS 53.100 Will supersede EN 474-11:2006+A1:2008
English Version
Earth-moving machinery - Safety - Part 11: Requirements
for earth- and landfill compactors
Engins de terrassement - Sécurité - Partie 11 :
Prescriptions applicables aux compacteurs de remblais
et de déchets
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 151.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 474-11:2017 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 474-11:2017
prEN 474-11:2017 (E)
Contents Page
European foreword ....................................................................................................................................................... 3
Introduction .................................................................................................................................................................... 4
1 Scope .................................................................................................................................................................... 5
2 Normative references .................................................................................................................................... 5
3 Terms and definitions ................................................................................................................................... 5
4 List of additional significant hazards ....................................................................................................... 6
5 Safety requirements and/or measures ................................................................................................... 6
5.1 General ................................................................................................................................................................ 6
5.2 Operator’s station ........................................................................................................................................... 6
5.2.1 General ................................................................................................................................................................ 6
5.2.2 Operator’ station equipped with a cab .................................................................................................... 6
5.3 Operator’s seat ................................................................................................................................................. 7
5.4 Steering system ................................................................................................................................................ 7
5.5 Braking system ................................................................................................................................................ 7
5.6 Stability ............................................................................................................................................................... 7
5.7 Lifting operation .............................................................................................................................................. 8
5.8 Fenders ............................................................................................................................................................... 8
6 Information for use ........................................................................................................................................ 8
Annex A (normative) List of additional significant hazards – Earth- and landfill compactors .......... 9
Annex B (normative) Braking requirements for earth- and landfill compactors ............................... 10
B.1 Terms and definitions ................................................................................................................................ 10
B.2 General requirements ................................................................................................................................ 10
B.2.1 Machines designed to tow trailers ......................................................................................................... 10
B.3 Test conditions .............................................................................................................................................. 10
B.3.1 Overall test parameters ............................................................................................................................. 10
B.3.2 Alternative machine test-configuration ............................................................................................... 10
B.3.3 Original machine configuration (OMC) ................................................................................................ 11
B.4 Performance test .......................................................................................................................................... 12
B.4.1 Stopping performance ................................................................................................................................ 12
Annex C (informative) Illustrations ...................................................................................................................... 14
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC machinery, and amendingDirective 95/16/EC (recast) [2006 L157] aimed to be covered.................................................. 15
Bibliography ................................................................................................................................................................. 16
---------------------- Page: 4 ----------------------oSIST prEN 474-11:2017
prEN 474-11:2017 (E)
European foreword
This document (prEN 474-11:2017) has been prepared by Technical Committee CEN/TC 151
“Construction equipment and building material machines - Safety”, the secretariat of which is held by
DIN.This document is currently submitted to the CEN Enquiry.
This document will supersede EN 474-11:2006+A1:2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.For bibliographic references, see prEN 474-1:2017.
EN 474 "Earth-moving machinery — Safety" comprises the following parts:
— Part 1: General requirements
— Part 2: Requirements for tractor-dozers
— Part 3: Requirements for loaders
— Part 4: Requirements for backhoe-loaders
— Part 5: Requirements for hydraulic excavators
— Part 6: Requirements for dumpers
— Part 7: Requirements for scrapers
— Part 8: Requirements for graders
— Part 9: Requirements for pipelayers
— Part 10: Requirements for trenchers
— Part 11: Requirements for earth and landfill compactors
— Part 12: Requirements for cable excavators
— Part 13: Requirements for rollers
This European Standard is intended for use in combination with part 1 of the series.
---------------------- Page: 5 ----------------------oSIST prEN 474-11:2017
prEN 474-11:2017 (E)
Introduction
This part of prEN 474 is a type C standard as stated in EN ISO 12100:2010.
The machinery concerned and the extent to which hazards, hazardous situations and events are covered
are indicated in the scope of this European Standard.When provisions of this type C standard are different from those which are stated in type A or B
standards, the provisions of this type C standard take precedence over the provisions of the other
standards, for machines that have been designed and built according to the provisions of this type C
standard.---------------------- Page: 6 ----------------------
oSIST prEN 474-11:2017
prEN 474-11:2017 (E)
1 Scope
This document, together with part 1, deals with all significant hazards for earth-moving machinery –
earth- and landfill compactors when they are used as intended and under the conditions of misuse which
are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see
Clause 4).The requirements of this part are complementary to the common requirements formulated in
prEN 474-1. This document does not repeat the requirements from prEN 474-1, but adds or replaces the
requirements for application for earth moving machinery – earth- and landfill compactors.
Rammer compactors and vibratory plates are dealt with in EN 500-1 and EN 500-4.This European Standard is not applicable to earth- and landfill compactors manufactured before the date
of publication of this European Standard by CEN.2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
prEN 474-1:2017, Earth-moving machinery — Safety — Part 1: General requirementsEN 12643:2014 Earth-moving machinery — Rubber-tyred machines — Steering requirements
(ISO 5010:1992, modified)EN ISO 3450:2011, Earth-moving machinery — Wheeled or high-speed rubber-tracked machines -
Performance requirements and test procedures for brake systems (ISO 3450:2011)EN ISO 6165:2012, Earth-moving machinery — Basic types - Identification and terms and definitions (ISO
6165:2012)EN ISO 7096:2008, Earth-moving machinery — Laboratory evaluation of operator seat vibration (ISO
7096:2000)EN ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk
reduction (ISO 12100:2010)ISO 7546:1983, Earth-moving machinery — Loader and front loading excavator buckets — Volumetric
ratingsISO 10263-4:2009, Earth-moving machinery — Operator enclosure environment — Part 4: Heating,
ventilating and air conditioning (HVAC) test method and performanceISO 14397-1:2007, Earth-moving machinery — Loaders and backhoe loaders — Part 1: Calculation of
rated operating capacity and test method for verifying calculated tipping load3 Terms and definitions
For the purposes of this European Standard, the terms and definitions given in prEN 474-1:2017,
ISO 13539:1998 and EN ISO 12100:2010 and the following apply.Note 1 to entry: Terminology for earth- and landfill compactors is specified in ISO 8811:2000 and illustrated in
Annex C of this European Standard.---------------------- Page: 7 ----------------------
oSIST prEN 474-11:2017
prEN 474-11:2017 (E)
Note 2 to entry: Definitions used in EN and ISO standards referred to in this European Standard are also valid for
this document.3.1
landfill compactor
self-propelled, wheeled compaction machine having front-mounted equipment with a dozing or loading
attachment and wheels provided with the means to crush and compact waste material, and which also
moves, grades and loads soil, landfill or sanitary (refuse) materials through its own motion (see
EN ISO 6165:2012, 4.9)3.2
dozing equipment for earth- and landfill compactors
equipment for moving or grading material through a motion of the machine in accordance ISO 6747:2013
3.3loading equipment
equipment for loading, transporting, distributing, filling and grading material
3.4
drums
steel wheels affixed to the axles with choppers, padfoot, sheepfoot or grid drums etc. which are used to
cut, demolish or compact material4 List of additional significant hazards
See Annex A.
NOTE Annex A (normative) contains all the significant hazards, hazardous situations and events, as far as they
are dealt with in this European Standard, identified by risk assessment as significant for this type of machinery and
which require action to eliminate or reduce the risk.5 Safety requirements and/or measures
5.1 General
Earth- and landfill compactors shall comply with the requirements of prEN 474-1:2017, as far as not
modified or replaced by the requirements of this part.5.2 Operator’s station
5.2.1 General
prEN 474-1:2017, 5.3 shall apply with the additions in 5.3.2 to 5.3.7.
5.2.2 Operator’ station equipped with a cab
The requirements of prEN 474-1:2017, 5.3.2 shall apply with the following additions:
Earth- and landfill compactors shall be fitted with a cab.5.2.2.1 Cab protection
The bottom part of the cab shall be able to protect the operator against penetrating material.
5.2.2.2 Deodorising filterprEN 474-1:2017, 5.3.2.1.2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.