FprEN 474-11

Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors

This document, together with FprEN 471-1:2019, deals with all significant hazards for earth-moving machinery, earth- and landfill compactors when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Annex A).
The requirements of this part are complementary to the common requirements formulated in FprEN 474-1. This document does not repeat the requirements from FprEN 474-1, but supplements or modifies the requirements for application for earth moving machinery - earth- and landfill compactors.
Rammer compactors and vibratory plates are excluded from this document.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
The following significant and relevant hazards are not covered in this document:
-   Laser;
-   Lightning.
This document does not provide performance requirements for safety related functions of control system(s). This document is not applicable to earth- and landfill compactors manufactured before the date of publication of this document by CEN.

Erdbaumaschinen - Sicherheit - Teil 11: Anforderungen für Erd- und Müllverdichter

Dieses Dokument behandelt zusammen mit Teil 1 alle signifikanten Gefährdungen für Erdbaumaschinen — Erd- und Müllverdichter, wenn sie bestimmungsgemäß verwendet werden sowie unter den vernünftigerweise vom Hersteller vorhersehbaren Fehlanwendungen für die gesamte Lebensdauer der Maschine (siehe Abschnitt 4).
Die Anforderungen gelten ergänzend zu den allgemeinen Anforderungen der prEN 474-1. Dieser Teil wiederholt nicht die Anforderungen der prEN 474-1, sondern ergänzt oder ersetzt diese für den Einsatz von Erdbaumaschinen — Erd- und Müllverdichter.
Explosionsstampfer und Vibrationsplatten werden in EN 500-1 und EN 500-4 behandelt.
Diese Europäische Norm ist nicht anzuwenden für Erd- und Müllverdichter, die vor der Veröffentlichung dieser Europäischen Norm durch CEN hergestellt wurden.

Engins de terrassement - Sécurité - Partie 11 : Prescriptions applicables aux compacteurs de remblais et de déchets

Le présent document associé au FprEN 471-1:2019 traite de tous les phénomènes dangereux significatifs liés aux engins de terrassement et aux compacteurs de remblais et de déchets, lorsqu'ils sont utilisés normalement et dans les conditions prévues, mais en tenant également compte des mauvais usages raisonnablement prévisibles associés à toute la durée de vie de l'engin (voir Annexe A).
Les prescriptions du présent document viennent en complément des prescriptions communes présentées dans le FprEN 474-1. Le présent document ne répète pas les prescriptions du FprEN 474-1, mais complète ou modifie les prescriptions applicables aux engins de terrassement et aux compacteurs de remblais et de déchets.
Les pilonneuses et les plaques vibrantes sont exclues du présent document.
Le présent document ne spécifie aucune prescription relative aux circuits électriques principaux et aux commandes des engins lorsque la principale source d'énergie est une alimentation électrique externe.
Les phénomènes dangereux significatifs et pertinents suivants ne sont pas couverts par le présent document :
-   laser ;
-   foudre.
Le présent document ne spécifie aucune prescription de performance relative aux fonctions de sécurité du (des) système(s) de commande. Le présent document n'est pas applicable aux compacteurs de remblais et de déchets fabriqués avant la date de publication du présent document par le CEN.

Stroji za zemeljska dela - Varnost - 11. del: Zahteve za kompaktorje zemlje in odpadkov

General Information

• Status: Not Published
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: CEN/TC 151 - Construction equipment and building material machines - Safety
• Drafting Committee: CEN/TC 151/WG 1 - Earth-moving machinery - Safety
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Due Date: 13-Jan-2022
• Completion Date: 13-Jan-2022
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: kSIST FprEN 474-11:2017 - Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors

RELATIONS

• Revised: EN 474-11:2006+A1:2008 - Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors
• Effective Date: 11-Feb-2015

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 474-11:2017
01-junij-2017
Stroji za zemeljska dela - Varnost - 11. del: Zahteve za kompaktorje zemlje in
odpadkov
Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill
compactors
Engins de terrassement - Sécurité - Partie 11 : Prescriptions applicables aux
compacteurs de remblais et de déchets
Ta slovenski standard je istoveten z: prEN 474-11
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
oSIST prEN 474-11:2017 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 474-11:2017
---------------------- Page: 2 ----------------------
oSIST prEN 474-11:2017
DRAFT
EUROPEAN STANDARD
prEN 474-11
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2017
ICS 53.100 Will supersede EN 474-11:2006+A1:2008
English Version
Earth-moving machinery - Safety - Part 11: Requirements
for earth- and landfill compactors
Engins de terrassement - Sécurité - Partie 11 :
Prescriptions applicables aux compacteurs de remblais
et de déchets

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 151.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 474-11:2017 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 474-11:2017
prEN 474-11:2017 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 List of additional significant hazards ....................................................................................................... 6

5 Safety requirements and/or measures ................................................................................................... 6

5.1 General ................................................................................................................................................................ 6

5.2 Operator’s station ........................................................................................................................................... 6

5.2.1 General ................................................................................................................................................................ 6

5.2.2 Operator’ station equipped with a cab .................................................................................................... 6

5.3 Operator’s seat ................................................................................................................................................. 7

5.4 Steering system ................................................................................................................................................ 7

5.5 Braking system ................................................................................................................................................ 7

5.6 Stability ............................................................................................................................................................... 7

5.7 Lifting operation .............................................................................................................................................. 8

5.8 Fenders ............................................................................................................................................................... 8

6 Information for use ........................................................................................................................................ 8

Annex A (normative) List of additional significant hazards – Earth- and landfill compactors .......... 9

Annex B (normative) Braking requirements for earth- and landfill compactors ............................... 10

B.1 Terms and definitions ................................................................................................................................ 10

B.2 General requirements ................................................................................................................................ 10

B.2.1 Machines designed to tow trailers ......................................................................................................... 10

B.3 Test conditions .............................................................................................................................................. 10

B.3.1 Overall test parameters ............................................................................................................................. 10

B.3.2 Alternative machine test-configuration ............................................................................................... 10

B.3.3 Original machine configuration (OMC) ................................................................................................ 11

B.4 Performance test .......................................................................................................................................... 12

B.4.1 Stopping performance ................................................................................................................................ 12

Annex C (informative) Illustrations ...................................................................................................................... 14

Annex ZA (informative) Relationship between this European Standard and the essential

requirements of Directive 2006/42/EC machinery, and amending

Directive 95/16/EC (recast) [2006 L157] aimed to be covered.................................................. 15

Bibliography ................................................................................................................................................................. 16

---------------------- Page: 4 ----------------------
oSIST prEN 474-11:2017
prEN 474-11:2017 (E)
European foreword

This document (prEN 474-11:2017) has been prepared by Technical Committee CEN/TC 151

“Construction equipment and building material machines - Safety”, the secretariat of which is held by

DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 474-11:2006+A1:2008.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association, and supports essential requirements of EU Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this

document.
For bibliographic references, see prEN 474-1:2017.
EN 474 "Earth-moving machinery — Safety" comprises the following parts:
— Part 1: General requirements
— Part 2: Requirements for tractor-dozers
— Part 3: Requirements for loaders
— Part 4: Requirements for backhoe-loaders
— Part 5: Requirements for hydraulic excavators
— Part 6: Requirements for dumpers
— Part 7: Requirements for scrapers
— Part 8: Requirements for graders
— Part 9: Requirements for pipelayers
— Part 10: Requirements for trenchers
— Part 11: Requirements for earth and landfill compactors
— Part 12: Requirements for cable excavators
— Part 13: Requirements for rollers

This European Standard is intended for use in combination with part 1 of the series.

---------------------- Page: 5 ----------------------
oSIST prEN 474-11:2017
prEN 474-11:2017 (E)
Introduction
This part of prEN 474 is a type C standard as stated in EN ISO 12100:2010.

The machinery concerned and the extent to which hazards, hazardous situations and events are covered

are indicated in the scope of this European Standard.

When provisions of this type C standard are different from those which are stated in type A or B

standards, the provisions of this type C standard take precedence over the provisions of the other

standards, for machines that have been designed and built according to the provisions of this type C

standard.
---------------------- Page: 6 ----------------------
oSIST prEN 474-11:2017
prEN 474-11:2017 (E)
1 Scope

This document, together with part 1, deals with all significant hazards for earth-moving machinery –

earth- and landfill compactors when they are used as intended and under the conditions of misuse which

are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see

Clause 4).

The requirements of this part are complementary to the common requirements formulated in

prEN 474-1. This document does not repeat the requirements from prEN 474-1, but adds or replaces the

requirements for application for earth moving machinery – earth- and landfill compactors.

Rammer compactors and vibratory plates are dealt with in EN 500-1 and EN 500-4.

This European Standard is not applicable to earth- and landfill compactors manufactured before the date

of publication of this European Standard by CEN.
2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

prEN 474-1:2017, Earth-moving machinery — Safety — Part 1: General requirements

EN 12643:2014 Earth-moving machinery — Rubber-tyred machines — Steering requirements

(ISO 5010:1992, modified)

EN ISO 3450:2011, Earth-moving machinery — Wheeled or high-speed rubber-tracked machines -

Performance requirements and test procedures for brake systems (ISO 3450:2011)

EN ISO 6165:2012, Earth-moving machinery — Basic types - Identification and terms and definitions (ISO

6165:2012)

EN ISO 7096:2008, Earth-moving machinery — Laboratory evaluation of operator seat vibration (ISO

7096:2000)

EN ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk

reduction (ISO 12100:2010)

ISO 7546:1983, Earth-moving machinery — Loader and front loading excavator buckets — Volumetric

ratings

ISO 10263-4:2009, Earth-moving machinery — Operator enclosure environment — Part 4: Heating,

ventilating and air conditioning (HVAC) test method and performance

ISO 14397-1:2007, Earth-moving machinery — Loaders and backhoe loaders — Part 1: Calculation of

rated operating capacity and test method for verifying calculated tipping load
3 Terms and definitions

For the purposes of this European Standard, the terms and definitions given in prEN 474-1:2017,

ISO 13539:1998 and EN ISO 12100:2010 and the following apply.

Note 1 to entry: Terminology for earth- and landfill compactors is specified in ISO 8811:2000 and illustrated in

Annex C of this European Standard.
---------------------- Page: 7 ----------------------
oSIST prEN 474-11:2017
prEN 474-11:2017 (E)

Note 2 to entry: Definitions used in EN and ISO standards referred to in this European Standard are also valid for

this document.
3.1
landfill compactor

self-propelled, wheeled compaction machine having front-mounted equipment with a dozing or loading

attachment and wheels provided with the means to crush and compact waste material, and which also

moves, grades and loads soil, landfill or sanitary (refuse) materials through its own motion (see

EN ISO 6165:2012, 4.9)
3.2
dozing equipment for earth- and landfill compactors

equipment for moving or grading material through a motion of the machine in accordance ISO 6747:2013

3.3
loading equipment
equipment for loading, transporting, distributing, filling and grading material
3.4
drums

steel wheels affixed to the axles with choppers, padfoot, sheepfoot or grid drums etc. which are used to

cut, demolish or compact material
4 List of additional significant hazards
See Annex A.

NOTE Annex A (normative) contains all the significant hazards, hazardous situations and events, as far as they

are dealt with in this European Standard, identified by risk assessment as significant for this type of machinery and

which require action to eliminate or reduce the risk.
5 Safety requirements and/or measures
5.1 General

Earth- and landfill compactors shall comply with the requirements of prEN 474-1:2017, as far as not

modified or replaced by the requirements of this part.
5.2 Operator’s station
5.2.1 General
prEN 474-1:2017, 5.3 shall apply with the additions in 5.3.2 to 5.3.7.
5.2.2 Operator’ station equipped with a cab

The requirements of prEN 474-1:2017, 5.3.2 shall apply with the following additions:

Earth- and landfill compactors shall be fitted with a cab.
5.2.2.1 Cab protection

The bottom part of the cab shall be able to protect the operator against penetrating material.

5.2.2.2 Deodorising filter
prEN 474-1:2017, 5.3.2.1.2
...