SIST EN 1844:2013
(Main)Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
This European Standard specifies a method for the determination of the resistance of plastic and rubber sheets for waterproofing to cracking when exposed, under static tensile strain, to air containing a definite concentration of ozone and at a definite temperature without the effects of direct light.
Abdichtungsbahnen - Verhalten bei Ozonbeanspruchung - Kunststoff- und Elastomerbahnen für Dachabdichtungen
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Widerstandes von Abdichtungsbahnen aus Kunststoffen und Elastomeren gegen Rissbildung fest, wenn sie unter statischer Zugbelastung der Luft mit festgelegter Ozonkonzentration und bei festgelegter Temperatur und ohne direkte Lichteinwirkung ausgesetzt werden.
Feuilles souples d'étanchéité - Détermination de la résistance à l'ozone - Feuilles d'étanchéité de toiture plastiques et élastomères
La présente Norme européenne spécifie une méthode de détermination de la résistance à l'apparition de craquelage sur les feuilles d’étanchéité de toiture plastiques et élastomères lorsque celles-ci sont exposées, sous contrainte de traction statique, à de l’air contenant une concentration donnée d’ozone, à une température donnée et à l’abri de la lumière directe.
Hidroizolacijski trakovi - Ugotavljanje odpornosti proti ozonu - Polimerni in elastomerni trakovi za tesnjenje streh
Ta evropski standard določa metodo za ugotavljanje odpornosti polimernih in elastomernih trakov za tesnjenje proti pokanju ob izpostavitvi zraku, ki vsebuje določeno koncentracijo ozona, pod statično natezno obremenitvijo in pri določeni temperaturi, brez učinkov neposredne sončne svetlobe.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi - Ugotavljanje odpornosti proti ozonu - Polimerni in elastomerni trakovi za tesnjenje strehAbdichtungsbahnen - Verhalten bei Ozonbeanspruchung - Kunststoff- und Elastomerbahnen für DachabdichtungenFeuilles souples d'étanchéité - Détermination de la résistance à l'ozone - Feuilles d'étanchéité de toiture plastiques et élastomèresFlexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 1844:2013SIST EN 1844:2013en,fr,de01-september-2013SIST EN 1844:2013SLOVENSKI
STANDARDSIST EN 1844:20011DGRPHãþD
SIST EN 1844:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1844
May 2013 ICS 91.100.50 Supersedes EN 1844:2001English Version
Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
Feuilles souples d'étanchéité - Détermination de la résistance à l'ozone - Feuilles d'étanchéité de toiture plastiques et élastomères
Abdichtungsbahnen - Verhalten bei Ozonbeanspruchung - Kunststoff- und Elastomerbahnen für Dachabdichtungen This European Standard was approved by CEN on 28 March 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1844:2013: ESIST EN 1844:2013
EN 1844:2013 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Principle .5 4 Apparatus .5 5 Sampling .5 6 Test specimens .5 7 Conditioning .6 8 Test conditions .6 9 Procedure .7 10 Expression of results .7 11 Precision of test method .7 12 Test report .8 Bibliography .9
SIST EN 1844:2013
EN 1844:2013 (E) 3 Foreword This document (EN 1844:2013) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn at the latest by November 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1844:2001. This document has been technically and editorially revised in order to correct the ozone concentration. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 1844:2013
EN 1844:2013 (E) 4 Introduction This European Standard is intended for characterisation of plastic and rubber sheets as manufactured or supplied before use. This test method relates exclusively to products or to their components where appropriate, and not to waterproofing membrane systems composed of such products and installed in the works. This test is intended to be used in conjunction with European Standards for plastic and rubber sheets for waterproofing. SIST EN 1844:2013
EN 1844:2013 (E) 5 1 Scope This European Standard specifies a method for the determination of the resistance of plastic and rubber sheets for waterproofing to cracking when exposed, under static tensile strain, to air containing a definite concentration of ozone and at a definite temperature without the effects of direct light. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references,
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi - Ugotavljanje odpornosti proti ozonu - Polimerni in elastomerni trakovi za tesnjenje strehAbdichtungsbahnen - Verhalten bei Ozonbeanspruchung - Kunststoff- und Elastomerbahnen für DachabdichtungenFeuilles souples d'étanchéité - Détermination de la résistance à l'ozone - Feuilles d'étanchéité de toiture plastiques et élastomèresFlexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:FprEN 1844kSIST FprEN 1844:2012en,fr,de01-december-2012kSIST FprEN 1844:2012SLOVENSKI
STANDARD
kSIST FprEN 1844:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1844
September 2012 ICS 91.100.50 Will supersede EN 1844:2001English Version
Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
Feuilles souples d'étanchéité - Détermination de la résistance à l'ozone - Feuilles d'étanchéité de toiture plastiques et élastomères
Abdichtungsbahnen - Verhalten bei Ozonbeanspruchung - Kunststoff- und Elastomerbahnen für Dachabdichtungen This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 254.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1844:2012: EkSIST FprEN 1844:2012
FprEN 1844:2012 (E) 2 Contents Page Foreword .3Introduction .41Scope .42Normative references .43Principle .44Apparatus .45Sampling .46Test specimens .57Conditioning .58Test conditions .69Procedure .610Expression of results .711Precision of test method .712Test report .7Bibliography .8 kSIST FprEN 1844:2012
FprEN 1844:2012 (E) 3 Foreword This document (FprEN 1844:2012) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by NEN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 1844:2001, which has been technically and editorially revised in order to correct the ozone concentration to the practice. kSIST FprEN 1844:2012
FprEN 1844:2012 (E) 4 Introduction This European Standard is intended for characterisation of plastic and rubber sheets as manufactured or supplied before use. This test method relates exclusively to products or to their components where appropriate, and not to waterproofing membrane systems composed of such products and installed in the works. This test is intended to be used in conjunction with European Standards for plastic and rubber sheets for waterproofing. 1 Scope This European Standard specifies a method for the determination of the resistance of plastic and rubber sheets for waterproofing to cracking when exposed, under static tensile strain, to air containing a definite concentration of ozone and at a definite temperature without the effects of direct light. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 13416, Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Rules for sampling ISO 1431-1:2004, Rubber, vulcanised or thermoplastic – Resistance to ozone cracking – Part 1: Static and dynamic strain
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.