SIST EN 13416:2024
(Main)Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling
This document specifies the general rules how to select the samples of correctly stored and handled samples of uninstalled bitumen, plastic or rubber sheets for waterproofing. It also specifies the procedures to be followed before the test piece is cut from the sample.
Abdichtungsbahnen - Bitumen-, Kunststoff- und Elastomerbahnen für Dachabdichtungen - Regeln für die Probenentnahme
Dieses Dokument legt die allgemeinen Regeln zur Auswahl von ordnungsgemäß gelagerten und gehandhabten Proben von nicht installierten Bitumen , Kunststoff und Elastomerbahnen für Abdichtungen fest. Es legt außerdem die Verfahren fest, die zu befolgen sind, bevor das Prüfstück aus der Probe ausgeschnitten wird.
Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture bitumineuses, plastiques et élastomères - Règles d'échantillonnage
Le présent document spécifie les règles générales relatives au choix des échantillons de feuilles d'étanchéité de toiture bitumineuses, plastiques et élastomères qui sont conservés et manipulés correctement. Il spécifie également les modes opératoires à suivre avant de découper le prélèvement pour essai dans l’échantillon.
Hidroizolacijski trakovi - Bitumenski, polimerni in elastomerni trakovi za tesnjenje streh - Pravila vzorčenja
Ta evropski standard določa pravila za izbiranje pravilno shranjenih in obravnavanih vzorcev nenameščenih bitumenskih, polimernih in elastomernih trakov za tesnjenje streh in rokovanje z njimi. Prav tako določa postopke, ki jih treba izvesti, preden je del za preskušanje odrezan od vzorca.
General Information
Relations
Overview
SIST EN 13416:2024 is the European standard that establishes the sampling rules for flexible sheets used in roof waterproofing. This includes uninstalled bitumen, plastic, and rubber sheets. Developed by the European Committee for Standardization (CEN), this standard supersedes the previous version EN 13416:2001 and provides clear procedures for selecting and preparing samples prior to testing.
The standard aims to ensure consistent and reliable sampling of waterproofing sheets, which is critical for quality control, factory production control (FPC), initial type testing (ITT), and market surveillance. SIST EN 13416:2024 covers samples that are correctly stored and handled but excludes sampling of sheets after installation.
Key Topics
- Scope of Sampling: Applies exclusively to uninstalled bitumen, plastic, and rubber sheets for roofing waterproofing, focusing on their proper storage and handling prior to sampling.
- Definitions: Key terms such as consignment, sample, test piece, and test specimen are clearly defined to standardize terminology across industry practices.
- Sampling Procedures: Specifies how to select samples from consignments, including agreed sampling frequencies:
- Less than 10,000 m²: 1 sample per consignment
- 10,000 to 50,000 m²: 2 samples per consignment
- More than 50,000 m²: 3 samples per consignment
- Sample Conditioning: Requires temperature conditioning of samples at (20 ± 10)°C for at least 24 hours before cutting test pieces to avoid inaccurate results.
- Test Piece Preparation: Detailed instructions to unroll samples on flat surfaces, reject outer turns unless adequately wrapped, and mark test pieces with material identification, top surface, and manufacturing direction.
- Test Specimen Cutting: Emphasizes inspection of test pieces to ensure no creasing or visible defects exist, following EN 1850-1 and EN 1850-2 standards before cutting test specimens to precise dimensions.
- Sampling Report: Mandates documentation including product identification, reference to SIST EN 13416:2024, any deviations or defects observed, and date/place of sampling to ensure full traceability.
Applications
SIST EN 13416:2024 is designed for manufacturers, testing laboratories, certification bodies, and quality controllers involved in the roof waterproofing industry. Its practical applications include:
- Quality Control: Providing standardized sampling methods to verify product conformity with manufacturing specifications and applicable European standards.
- Factory Production Control (FPC): Assisting manufacturers in internal testing regimes with a clear framework to select representative samples for ongoing monitoring.
- Initial Type Testing (ITT): Serving as a guideline for initial product verification before market release.
- Market Surveillance: Enabling authorities to undertake sampling of products on the market to ensure compliance and protect consumers.
- Research and Development: Helping R&D teams obtain accurately representative samples for performance testing and product innovation.
Related Standards
For comprehensive testing and evaluation of flexible sheets for waterproofing, SIST EN 13416:2024 should be used in conjunction with:
- EN 1850-1: Determination of visible defects in bitumen sheets for roof waterproofing.
- EN 1850-2: Determination of visible defects in plastic and rubber sheets for roof waterproofing.
- ISO 3534 Series: Covers statistical terms and methodologies relevant for designing experiments and applied statistics within sampling and quality assessment.
- Additional CEN standards on flexible sheets for waterproofing that specify performance characteristics and installation methods.
By following the sampling rules outlined in SIST EN 13416:2024, stakeholders ensure consistency, reliability, and accuracy in testing flexible waterproofing sheets, thereby supporting high-quality roofing solutions and industry compliance with European standards.
Frequently Asked Questions
SIST EN 13416:2024 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling". This standard covers: This document specifies the general rules how to select the samples of correctly stored and handled samples of uninstalled bitumen, plastic or rubber sheets for waterproofing. It also specifies the procedures to be followed before the test piece is cut from the sample.
This document specifies the general rules how to select the samples of correctly stored and handled samples of uninstalled bitumen, plastic or rubber sheets for waterproofing. It also specifies the procedures to be followed before the test piece is cut from the sample.
SIST EN 13416:2024 is classified under the following ICS (International Classification for Standards) categories: 91.060.20 - Roofs; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13416:2024 has the following relationships with other standards: It is inter standard links to SIST EN 13416:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13416:2024 is associated with the following European legislation: EU Directives/Regulations: 305/2011. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 13416:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2024
Nadomešča:
SIST EN 13416:2001
Hidroizolacijski trakovi - Bitumenski, polimerni in elastomerni trakovi za tesnjenje
streh - Pravila vzorčenja
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof
waterproofing - Rules for sampling
Abdichtungsbahnen - Bitumen-, Kunststoff- und Elastomerbahnen für Dachabdichtungen
- Regeln für die Probenentnahme
Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture bitumineuses, plastiques
et élastomères - Règles d'échantillonnage
Ta slovenski standard je istoveten z: EN 13416:2023
ICS:
91.060.20 Strehe Roofs
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13416
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN 13416:2001
English Version
Flexible sheets for waterproofing - Bitumen, plastic and
rubber sheets for roof waterproofing - Rules for sampling
Feuilles souples d'étanchéité - Feuilles d'étanchéité de Abdichtungsbahnen - Bitumen-, Kunststoff- und
toiture bitumineuses, plastiques et élastomères - Elastomerbahnen für Dachabdichtungen - Regeln für
Règles d'échantillonnage die Probenentnahme
This European Standard was approved by CEN on 7 August 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13416:2023 E
worldwide for CEN national Members.
Contents Page
Contents . 2
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 7
5 Sampling . 7
5.1 General . 7
5.2 FPC and ITT . 7
5.3 Consignment . 7
6 Test pieces and test specimens . 7
6.1 Temperature conditioning . 7
6.2 Test pieces . 7
6.3 Test specimens . 8
7 Sampling report . 8
Bibliography . 9
European foreword
This document (EN 13416:2023) has been prepared by Technical Committee CEN/TC 254 “Flexible
sheets for waterproofing”, the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an iden-
tical text or by endorsement, at the latest by April 2024, and conflicting national standards shall be with-
drawn at the latest by April 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13416:2001.
The main changes compared to the previous edition are listed below:
— Content has been extended to market surveillance and other purpose of testing and sampling for
factory production control (FPC) and initial type testing (ITT); and
— Description of the sampling condition of sheets before use are i
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...