SIST EN 12310-1:2025
(Main)Flexible sheets for waterproofing - Determination of resistance to tearing (nail shank) - Part 1: Bitumen sheets for roof waterproofing
Flexible sheets for waterproofing - Determination of resistance to tearing (nail shank) - Part 1: Bitumen sheets for roof waterproofing
This document specifies a method for the determination of the resistance tearing (nail shank) of bitumen sheets for roofing.
Abdichtungsbahnen - Bestimmung des Weiterreißwiderstandes (Nagelschaft) - Teil 1: Bitumenbahnen für Dachabdichtungen
Dieses Dokument legt die Verfahren zur Bestimmung des Weiterreißwiderstandes (Nagelschaft) von Bitumen-Dachabdichtungsbahnen fest.
Feuilles souples d’étanchéité - Détermination de la résistance à la déchirure (au clou) - Partie 1: Feuilles d’étanchéité de toiture bitumineuses
Ce document décrit une méthode pour la détermination de la résistance à la déchirure au clou des feuilles d’étanchéité de toiture bitumineuses.
Hidroizolacijski trakovi - Določevanje odpornosti proti trganju ob žeblju - 1. del: Bitumenski trakovi za tesnjenje streh
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2025
Nadomešča:
SIST EN 12310-1:2000
Hidroizolacijski trakovi - Določevanje odpornosti proti trganju ob žeblju - 1. del:
Bitumenski trakovi za tesnjenje streh
Flexible sheets for waterproofing - Determination of resistance to tearing (nail shank) -
Part 1: Bitumen sheets for roof waterproofing
Abdichtungsbahnen - Bestimmung des Weiterreißwiderstandes (Nagelschaft) - Teil 1:
Bitumenbahnen für Dachabdichtungen
Feuilles souples d’étanchéité - Détermination de la résistance à la déchirure (au clou) -
Partie 1: Feuilles d’étanchéité de toiture bitumineuses
Ta slovenski standard je istoveten z: EN 12310-1:2025
ICS:
91.060.20 Strehe Roofs
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 12310-1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2025
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN 12310-1:1999
English Version
Flexible sheets for waterproofing - Determination of
resistance to tearing (nail shank) - Part 1: Bitumen sheets
for roof waterproofing
Feuilles souples d'étanchéité - Détermination de la Abdichtungsbahnen - Bestimmung des
résistance à la déchirure (au clou) - Partie 1: Feuilles Weiterreißwiderstandes (Nagelschaft) - Teil 1:
d'étanchéité de toiture bitumineuses Bitumenbahnen für Dachabdichtungen
This European Standard was approved by CEN on 14 April 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12310-1:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 5
5.1 Tensile testing machine . 5
5.2 Stirrup assembly . 6
6 Sampling . 6
7 Preparation of test specimens . 6
8 Procedure . 7
9 Expression of results, evaluation and precision of test method . 7
9.1 Evaluation . 7
9.2 Precision of the test method . 7
10 Test report . 7
European foreword
This document (EN 12310-1:2025) has been prepared by Technical Committee CEN/TC 254 “Flexible
sheets for waterproofing”, the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2025, and conflicting national standards shall
be withdrawn at the latest by November 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12310-1:1999.
— the normative reference has been updated;
— Figure 1 has been amended;
— the “or” has been deleted in Clause 7, 1st paragraph, last sentence.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN websi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.