SIST EN 2591-6402:2004

Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock

This standard specifies a method of assessing the ability of optical connection elements (including permanent connections) and fibre optic couplers to withstand specified severities of mechanical shock.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6402: Optische Verbindungselemente - Stöße

Diese Norm legt ein Verfahren zum Nachweis der Widerstandsfähigkeit von optischen Verbindungselementen (einschließlich dauerhaften Verbindungen) und LWL-Kopplern gegenüber mechanischen Stößen mit vorgegebenem Schärfegrad fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6402 : Organes optiques - Chocs

La présente norme prescrit une méthode pour déterminer la capacité pour des éléments de connexion optique (y compris les connexions permanentes) et des coupleurs à fibre optiques à résister à des chocs mécaniques à une sévérité spécifiée.
Elle doit être utilisée conjointement avec EN 2591-100.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock

General Information

• Status: Published
• Publication Date: 30-Apr-2004
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I08 - Imaginarni 08
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Ref Project: EN 2591-6402:2001 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2004
Aerospace series - Elements of electrical and optical connection - Test methods -
Part 6402: Optical elements - Shock
Aerospace series - Elements of electrical and optical connection - Test methods - Part
6402: Optical elements - Shock
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren -
Teil 6402: Optische Verbindungselemente - Stöße
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais -
Partie 6402 : Organes optiques - Chocs
Ta slovenski standard je istoveten z: EN 2591-6402:2001
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 2591-6402
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 49.060
English version
Aerospace series - Elements of electrical and optical connection
- Test methods - Part 6402: Optical elements - Shock
Série aérospatiale - Organes de connexion électrique et Luft- und Raumfahrt - Elektrische und optische
optique - Méthodes d'essais - Partie 6402: Organes Verbindungselemente - Prüfverfahren - Teil 6402: Optische
optiques - Chocs Elemente - Stöße
This European Standard was approved by CEN on 5 August 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2591-6402:2001 E
worldwide for CEN national Members.

Foreword
This European Standard has been prepared by the European Association of Aerospace Manufacturers
(AECMA).
After inquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national stand
...