SIST EN 14617-2:2016
(Main)Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
This European Standard specifies a method for the determination of flexural strength under a concentrated load (breaking resistance) of agglomerated stone flat products.
Künstlich hergestellter Stein - Prüfverfahren - Teil 2: Bestimmung der Biegefestigkeit (Schwenkbiegen)
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Biegefestigkeit (Biegebeständigkeit) von ebenen Kunststeinprodukten unter einer Mittellinienlast fest.
Pierre agglomérée - Méthodes d'essai - Partie 2: Détermination de la résistance à la flexion (traction)
La présente Norme européenne spécifie une méthode de détermination de la résistance à la flexion (résistance à la rupture) sous charge centrée des produits plats en pierres agglomérées.
Aglomeriran kamen - Preskusne metode - 2. del: Ugotavljanje upogibne trdnosti (zvijanje)
Ta evropski standard določa metodo za ugotavljanje upogibne trdnosti pod koncentrirano obtežbo (odpornost proti prelomu) izdelkov iz aglomeriranega kamna.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aglomeriran kamen - Preskusne metode - 2. del: Ugotavljanje upogibne trdnosti (zvijanje)Künstlich hergestellter Stein - Prüfverfahren - Teil 2: Bestimmung der Biegefestigkeit (Schwenkbiegen)Pierre agglomérée - Méthodes d'essai - Partie 2: Détermination de la résistance à la flexion (traction)Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 14617-2:2016SIST EN 14617-2:2016en,fr,de01-september-2016SIST EN 14617-2:2016SLOVENSKI
STANDARD
SIST EN 14617-2:2016
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14617-2
June
t r s x ICS
{ sä s r rä s w Supersedes EN
s v x s yæ tã t r r zEnglish Version
Agglomerated stone æ Test methods æ Part
tã Pierre agglomérée æ Méthodes d 5essai æ Partie
tã
Künstlich hergestellter Stein æ Prüfverfahren æ Teil
tã This European Standard was approved by CEN on
t w March
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v x s yæ tã t r s x ESIST EN 14617-2:2016
EN 14617-2:2016 (E) 2 Contents
Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Principle . 4 4 Symbols . 4 5 Apparatus . 4 6 Preparation of the specimens . 5 6.1 Sampling . 5 6.2 Test specimens . 5 6.2.1 Surface finish . 5 6.2.2 Dimensions of the specimens for type testing and for factory production control . 6 6.2.3 Conditioning before testing . 6 7 Test procedure . 6 8 Expression of the results . 6 9 Test report . 7 Annex A (normative)
Statistical evaluation of tests results . 8 A.1 Scope . 8 A.2 Symbols and definitions . 8 A.3 Statistical evaluation of test results . 8 Bibliography . 11
SIST EN 14617-2:2016
EN 14617-2:2016 (E) 3 European foreword This document (EN 14617-2:2016) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by December 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14617-2:2008. Clauses 2, 6.1, 6.2.2, 7 and 9 have been modified and old 6.23 "Tolerance" has been deleted since the last edition of this European Standard. This European Standard is one of a series of standards for test methods for agglomerated stones which includes the following parts: — Part 1: Determination of apparent density and water absorption — Part 2: Determination of flexural strength (bending) — Part 4: Determination of the abrasion resistance — Part 5: Determination of freeze and thaw resistance — Part 6: Determination of thermal shock resistance — Part 8: Determination of resistance to fixing (dowel hole) — Part 9: Determination of impact resistance — Part 10: Determination of chemical resistance — Part 11: Determination of linear thermal expansion coefficient — Part 12: Determination of dimensional stability — Part 13: Determination of electrical resistivity — Part 15: Determination of compressive strength — Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 14617-2:2016
EN 14617-2:2016 (E) 4 1 Scope This European Standard specifies a method for the determination of flexural strength under a concentrated load (breaking resistance) of agglomerated stone flat products. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12372, Natural st
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.