Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only) - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

The present document specifies technical characteristics and methods of measurements for equipment:
1) portable Very High Frequency (VHF) transceivers operating with 25 kHz channels;
2) portable Very High Frequency (VHF) transceivers operating with both 25 kHz and 12,5 kHz channels.
These radiotelephones are not providing maritime distress and safety communications functions (i.e. not forming part of
the Global Maritime Distress and Safety System (GMDSS)) operating in certain frequency bands allocated to the
maritime mobile service using either 25 kHz or 25 kHz and 12,5 kHz channels.
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.2] under the
conditions identified in annex A.

Prenosne radiotelefonske naprave VHF za pomorske mobilne storitve, ki delujejo v območju VHF (samo za uporabo zunaj GMDSS) - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU

Ta dokument določa tehnične lastnosti in merilne metode za naslednjo opremo:
1) prenosne oddajno-sprejemne naprave VHF, ki delujejo s kanali 25 kHz;
2) prenosne oddajno-sprejemne naprave VHF, ki delujejo s kanali 25 kHz in 12,5 kH.
Te radiotelefonske naprave ne zagotavljajo funkcij pomorske zasilne in varnostne komunikacije (tj. niso del globalnega pomorskega zasilnega in varnostnega sistema (GMDSS)) ter delujejo v določenih frekvenčnih pasovih, dodeljenih pomorskim mobilnim storitvam, ki uporabljajo kanale 25 kHz ali 25 kHz in 12,5 kHz. Ta dokument zajema bistvene zahteve člena 3.2 direktive 2014/53/EU [i.2] pod pogoji iz dodatka A.

General Information

Status
Published
Public Enquiry End Date
19-Mar-2017
Publication Date
12-Apr-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Apr-2017
Due Date
15-Jun-2017
Completion Date
13-Apr-2017

Buy Standard

Standard
SIST EN 301 178 V2.2.1:2017
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Standard
ETSI EN 301 178 V2.2.1 (2017-03) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
English language
44 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 301 178 V2.2.0 (2016-12) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
English language
44 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only) - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:ETSI EN 301 178 V2.2.1 (2017-03)SIST EN 301 178 V2.2.1:2017en01-junij-2017SIST EN 301 178 V2.2.1:2017SLOVENSKI

STANDARD
SIST EN 301 178 V2.2.1:2017

ETSI EN 301 178 V2.2.1 (2017-03) Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

HARMONISED EUROPEAN STANDARD SIST EN 301 178 V2.2.1:2017
ETSI ETSI EN 301 178 V2.2.1 (2017-03) 2

Reference REN/ERM-TG26-532 Keywords harmonised standard, maritime, radio, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2017. All rights reserved.

DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 178 V2.2.1:2017

ETSI ETSI EN 301 178 V2.2.1 (2017-03) 3 Contents Intellectual Property Rights ................................................................................................................................ 7 Foreword ............................................................................................................................................................. 7 Modal verbs terminology .................................................................................................................................... 7 1 Scope ........................................................................................................................................................ 8 2 References ................................................................................................................................................ 8 2.1 Normative references ......................................................................................................................................... 8 2.2 Informative references ........................................................................................................................................ 9 3 Definitions, symbols and abbreviations ................................................................................................... 9 3.1 Definitions .......................................................................................................................................................... 9 3.2 Symbols .............................................................................................................................................................. 9 3.3 Abbreviations ................................................................................................................................................... 10 4 General and operational requirements .................................................................................................... 10 4.1 Construction ..................................................................................................................................................... 10 4.2 Controls and indicators ..................................................................................................................................... 11 4.3 Microphone and loudspeaker ........................................................................................................................... 11 4.4 Safety precautions ............................................................................................................................................ 11 4.5 Labelling........................................................................................................................................................... 12 5 Technical requirements specifications ................................................................................................... 12 5.1 Environmental profile ....................................................................................................................................... 12 5.2 Conformance requirements .............................................................................................................................. 12 5.2.1 Switching time ............................................................................................................................................ 12 5.2.2 Class of emission and modulation characteristics ....................................................................................... 12 6 General conditions of measurement ....................................................................................................... 12 6.1 Arrangements for RF connections to the equipment ........................................................................................ 12 6.1.1 RF connections to integral antenna equipment ........................................................................................... 12 6.1.2 RF connection to equipment with a detachable antenna ............................................................................. 13 6.2 Arrangements for test signals applied to the receiver input .............................................................................. 13 6.3 Squelch ............................................................................................................................................................. 13 6.4 Normal test modulation .................................................................................................................................... 13 6.5 Artificial antenna .............................................................................................................................................. 13 6.6 Arrangements for test signals applied to the transmitter input ......................................................................... 13 6.7 Test channels .................................................................................................................................................... 13 6.8 Test conditions, power sources and ambient temperatures ............................................................................... 13 6.8.1 Normal and extreme test conditions............................................................................................................ 13 6.8.2 Test power source ....................................................................................................................................... 14 6.9 Normal test conditions ...................................................................................................................................... 14 6.9.1 Normal temperature and humidity .............................................................................................................. 14 6.9.2 Normal power sources ................................................................................................................................ 14 6.9.2.1 Battery power source............................................................................................................................. 14 6.9.2.2 Other power sources .............................................................................................................................. 14 6.10 Extreme test conditions .................................................................................................................................... 14 6.10.0 General ........................................................................................................................................................ 14 6.10.1 Extreme temperatures ................................................................................................................................. 14 6.10.2 Extreme values of test power sources ......................................................................................................... 14 6.10.2.1 Battery power source............................................................................................................................. 14 6.10.2.2 Other power sources .............................................................................................................................. 15 6.11 Procedure for tests at extreme temperatures ..................................................................................................... 15 6.12 Reference bandwidths for spurious measurements ........................................................................................... 15 7 Environmental tests ................................................................................................................................ 15 7.1 Procedure .......................................................................................................................................................... 15 7.2 Performance check ........................................................................................................................................... 15 7.3 Drop test ........................................................................................................................................................... 15 SIST EN 301 178 V2.2.1:2017

ETSI ETSI EN 301 178 V2.2.1 (2017-03) 4 7.3.1 Definition .................................................................................................................................................... 15 7.3.2 Method of measurement ............................................................................................................................. 16 7.3.3 Requirement ................................................................................................................................................ 16 7.4 Temperature tests ............................................................................................................................................. 16 7.4.1 Definition .................................................................................................................................................... 16 7.4.2 Dry heat ...................................................................................................................................................... 16 7.4.2.1 Definition .............................................................................................................................................. 16 7.4.2.2 Method of measurement ........................................................................................................................ 16 7.4.2.3 Requirement .......................................................................................................................................... 16 7.4.3 Damp heat ................................................................................................................................................... 16 7.4.3.1 Definition .............................................................................................................................................. 16 7.4.3.2 Method of measurement ........................................................................................................................ 17 7.4.3.3 Requirement .......................................................................................................................................... 17 7.4.4 Low temperature cycle ................................................................................................................................ 17 7.4.4.1 Definition .............................................................................................................................................. 17 7.4.4.2 Method of measurement ........................................................................................................................ 17 7.4.4.3 Requirement .......................................................................................................................................... 17 8 Transmitter ............................................................................................................................................. 17 8.1 Frequency error ................................................................................................................................................ 17 8.1.1 Definition .................................................................................................................................................... 17 8.1.2 Method of measurement ............................................................................................................................. 17 8.1.3 Limits .......................................................................................................................................................... 18 8.2 Carrier power .................................................................................................................................................... 18 8.2.1 Definitions .................................................................................................................................................. 18 8.2.2 Method of measurement ............................................................................................................................. 18 8.2.3 Limits, Normal and extreme test conditions ............................................................................................... 18 8.3 Frequency deviation ......................................................................................................................................... 18 8.3.1 Definition .................................................................................................................................................... 18 8.3.2 Maximum permissible frequency deviation ................................................................................................ 18 8.3.2.1 Method of measurement ........................................................................................................................ 18 8.3.2.2 Limits .................................................................................................................................................... 18 8.3.3 Reduction of frequency deviation at modulation frequencies above 3 kHz ................................................ 19 8.3.3.1 Method of measurement ........................................................................................................................ 19 8.3.3.2 Limits .................................................................................................................................................... 19 8.4 Sensitivity of the modulator, including microphone ........................................................................................ 20 8.4.1 Definition .................................................................................................................................................... 20 8.4.2 Method of measurement ............................................................................................................................. 20 8.4.3 Limits .......................................................................................................................................................... 20 8.5 Audio frequency response ................................................................................................................................ 20 8.5.1 Definition .................................................................................................................................................... 20 8.5.2 Method of measurement ............................................................................................................................. 20 8.5.3 Limit ........................................................................................................................................................... 20 8.6 Audio frequency harmonic distortion of the emission...................................................................................... 21 8.6.1 Definition .................................................................................................................................................... 21 8.6.2 Method of measurement ............................................................................................................................. 21 8.6.2.1 RF Coupling to the test demodulator .................................................................................................... 21 8.6.2.2 Normal test conditions .......................................................................................................................... 22 8.6.2.3 Extreme test conditions ......................................................................................................................... 22 8.6.3 Limits .......................................................................................................................................................... 22 8.7 Adjacent channel power ................................................................................................................................... 22 8.7.1 Definition .................................................................................................................................................... 22 8.7.2 Method of measurement ............................................................................................................................. 22 8.7.3 Limits .......................................................................................................................................................... 23 8.8 Conducted spurious emissions conveyed to the antenna .................................................................................. 23 8.8.1 Definition .................................................................................................................................................... 23 8.8.2 Method of measurement ............................................................................................................................. 23 8.8.3 Limit ........................................................................................................................................................... 23 8.9 Cabinet radiation and conducted spurious emissions other than those conveyed to the antenna ..................... 23 8.9.1 Definitions .................................................................................................................................................. 23 8.9.2 Method of measurement ............................................................................................................................. 23 8.9.3 Limits .......................................................................................................................................................... 24 SIST EN 301 178 V2.2.1:2017

ETSI ETSI EN 301 178 V2.2.1 (2017-03) 5 8.10 Residual modulation of the transmitter ............................................................................................................ 25 8.10.1 Definition .................................................................................................................................................... 25 8.10.2 Method of measurement ............................................................................................................................. 25 8.10.3 Limit ........................................................................................................................................................... 25 8.11 Transient frequency behaviour of the transmitter ............................................................................................. 25 8.11.1 Definitions .................................................................................................................................................. 25 8.11.2 Method of measurement ............................................................................................................................. 26 8.11.3 Limits .......................................................................................................................................................... 27 9 Receiver .................................................................................................................................................. 29 9.1 Harmonic distortion and rated audio frequency output power ......................................................................... 29 9.1.1 Definition .................................................................................................................................................... 29 9.1.2 Methods of measurement ............................................................................................................................ 29 9.1.3 Limits .......................................................................................................................................................... 29 9.2 Audio frequency response ................................................................................................................................ 29 9.2.1 Definition .................................................................................................................................................... 29 9.2.2 Method of measurement ............................................................................................................................. 29 9.2.3 Limits .......................................................................................................................................................... 30 9.3 Maximum usable sensitivity ............................................................................................................................. 30 9.3.1 Definition .................................................................................................................................................... 30 9.3.2 Method of measurement ............................................................................................................................. 31 9.3.3 Limits .......................................................................................................................................................... 31 9.4 Co-channel rejection......................................................................................................................................... 31 9.4.1 Definition .................................................................................................................................................... 31 9.4.2 Method of measurement ............................................................................................................................. 31 9.4.3 Limit ........................................................................................................................................................... 31 9.5 Adjacent channel selectivity ............................................................................................................................. 32 9.5.1 Definition .................................................................................................................................................... 32 9.5.2 Method of measurement ............................................................................................................................. 32 9.5.3 Limits .......................................................................................................................................................... 32 9.6 Spurious response rejection .............................................................................................................................. 32 9.6.1 Definition .................................................................................................................................................... 32 9.6.2 Method of measurement ............................................................................................................................. 32 9.6.3 Limit ........................................................................................................................................................... 33 9.7 Intermodulation response ................................................................................................................................. 33 9.7.1 Definition .................................................................................................................................................... 33 9.7.2 Method of measurement ............................................................................................................................. 33 9.7.3 Limit ........................................................................................................................................................... 33 9.8 Blocking or desensitization .............................................................................................................................. 33 9.8.1 Definition .................................................................................................................................................... 33 9.8.2 Method of measurement ............................................................................................................................. 33 9.8.3 Limit ........................................................................................................................................................... 34 9.9 Conducted spurious emissions ......................................................................................................................... 34 9.9.1 Definition .................................................................................................................................................... 34 9.9.2 Method of measurement ............................................................................................................................. 34 9.9.3 Limit ........................................................................................................................................................... 34 9.10 Radiated spurious emissions............................................................................................................................. 34 9.10.1 Definition .................................................................................................................................................... 34 9.10.2 Method of measurements ............................................................................................................................ 34 9.10.3 Limit ........................................................................................................................................................... 35 9.11 Receiver noise and hum level ........................................................................................................................... 35 9.11.1 Definition .................................................................................................................................................... 35 9.11.2 Method of measurement ............................................................................................................................. 35 9.11

...

ETSI EN 301 178 V2.2.1 (2017-03)
HARMONISED EUROPEAN STANDARD
Portable Very High Frequency (VHF) radiotelephone equipment
for the maritime mobile service operating in the VHF bands
(for non-GMDSS applications only);
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU
---------------------- Page: 1 ----------------------
2 ETSI EN 301 178 V2.2.1 (2017-03)
Reference
REN/ERM-TG26-532
Keywords
harmonised standard, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the

print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017.
All rights reserved.
TM TM TM

DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.

3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.

ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 178 V2.2.1 (2017-03)
Contents

Intellectual Property Rights ................................................................................................................................ 7

Foreword ............................................................................................................................................................. 7

Modal verbs terminology .................................................................................................................................... 7

1 Scope ........................................................................................................................................................ 8

2 References ................................................................................................................................................ 8

2.1 Normative references ......................................................................................................................................... 8

2.2 Informative references ........................................................................................................................................ 9

3 Definitions, symbols and abbreviations ................................................................................................... 9

3.1 Definitions .......................................................................................................................................................... 9

3.2 Symbols .............................................................................................................................................................. 9

3.3 Abbreviations ................................................................................................................................................... 10

4 General and operational requirements .................................................................................................... 10

4.1 Construction ..................................................................................................................................................... 10

4.2 Controls and indicators ..................................................................................................................................... 11

4.3 Microphone and loudspeaker ........................................................................................................................... 11

4.4 Safety precautions ............................................................................................................................................ 11

4.5 Labelling........................................................................................................................................................... 12

5 Technical requirements specifications ................................................................................................... 12

5.1 Environmental profile ....................................................................................................................................... 12

5.2 Conformance requirements .............................................................................................................................. 12

5.2.1 Switching time ............................................................................................................................................ 12

5.2.2 Class of emission and modulation characteristics ....................................................................................... 12

6 General conditions of measurement ....................................................................................................... 12

6.1 Arrangements for RF connections to the equipment ........................................................................................ 12

6.1.1 RF connections to integral antenna equipment ........................................................................................... 12

6.1.2 RF connection to equipment with a detachable antenna ............................................................................. 13

6.2 Arrangements for test signals applied to the receiver input .............................................................................. 13

6.3 Squelch ............................................................................................................................................................. 13

6.4 Normal test modulation .................................................................................................................................... 13

6.5 Artificial antenna .............................................................................................................................................. 13

6.6 Arrangements for test signals applied to the transmitter input ......................................................................... 13

6.7 Test channels .................................................................................................................................................... 13

6.8 Test conditions, power sources and ambient te mperat ures ............................................................................... 13

6.8.1 Normal and extreme test conditions............................................................................................................ 13

6.8.2 Test power source ....................................................................................................................................... 14

6.9 Normal test conditions ...................................................................................................................................... 14

6.9.1 Normal temperature and humidity .............................................................................................................. 14

6.9.2 Normal power sources ................................................................................................................................ 14

6.9.2.1 Battery power source............................................................................................................................. 14

6.9.2.2 Other power sources .............................................................................................................................. 14

6.10 Extreme test conditions .................................................................................................................................... 14

6.10.0 General ........................................................................................................................................................ 14

6.10.1 Extreme temperatures ................................................................................................................................. 14

6.10.2 Extreme values of test power sources ......................................................................................................... 14

6.10.2.1 Battery power source............................................................................................................................. 14

6.10.2.2 Other power sources .............................................................................................................................. 15

6.11 Procedure for tests at extreme temperatures ..................................................................................................... 15

6.12 Reference bandwidths for spurious measurements ........................................................................................... 15

7 Environmental tests ................................................................................................................................ 15

7.1 Procedure .......................................................................................................................................................... 15

7.2 Performance check ........................................................................................................................................... 15

7.3 Drop test ........................................................................................................................................................... 15

ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 178 V2.2.1 (2017-03)

7.3.1 Definition .................................................................................................................................................... 15

7.3.2 Method of measurement ............................................................................................................................. 16

7.3.3 Requirement ................................................................................................................................................ 16

7.4 Temperature tests ............................................................................................................................................. 16

7.4.1 Definition .................................................................................................................................................... 16

7.4.2 Dry heat ...................................................................................................................................................... 16

7.4.2.1 Definition .............................................................................................................................................. 16

7.4.2.2 Method of measurement ........................................................................................................................ 16

7.4.2.3 Requirement .......................................................................................................................................... 16

7.4.3 Damp heat ................................................................................................................................................... 16

7.4.3.1 Definition .............................................................................................................................................. 16

7.4.3.2 Method of measurement ........................................................................................................................ 17

7.4.3.3 Requirement .......................................................................................................................................... 17

7.4.4 Low temperature cycle ................................................................................................................................ 17

7.4.4.1 Definition .............................................................................................................................................. 17

7.4.4.2 Method of measurement ........................................................................................................................ 17

7.4.4.3 Requirement .......................................................................................................................................... 17

8 Transmitter ............................................................................................................................................. 17

8.1 Frequency error ................................................................................................................................................ 17

8.1.1 Definition .................................................................................................................................................... 17

8.1.2 Method of measurement ............................................................................................................................. 17

8.1.3 Limits .......................................................................................................................................................... 18

8.2 Carrier power .................................................................................................................................................... 18

8.2.1 Definitions .................................................................................................................................................. 18

8.2.2 Method of measurement ............................................................................................................................. 18

8.2.3 Limits, Normal and extreme test conditions ............................................................................................... 18

8.3 Frequency deviation ......................................................................................................................................... 18

8.3.1 Definition .................................................................................................................................................... 18

8.3.2 Maximum permissible frequency deviation ................................................................................................ 18

8.3.2.1 Method of measurement ........................................................................................................................ 18

8.3.2.2 Limits .................................................................................................................................................... 18

8.3.3 Reduction of frequency deviation at modulation frequencies above 3 kHz ................................................ 19

8.3.3.1 Method of measurement ........................................................................................................................ 19

8.3.3.2 Limits .................................................................................................................................................... 19

8.4 Sensitivity of the modulator, including microphone ........................................................................................ 20

8.4.1 Definition .................................................................................................................................................... 20

8.4.2 Method of measurement ............................................................................................................................. 20

8.4.3 Limits .......................................................................................................................................................... 20

8.5 Audio frequency response ................................................................................................................................ 20

8.5.1 Definition .................................................................................................................................................... 20

8.5.2 Method of measurement ............................................................................................................................. 20

8.5.3 Limit ........................................................................................................................................................... 20

8.6 Audio frequency harmonic distortion of the emission...................................................................................... 21

8.6.1 Definition .................................................................................................................................................... 21

8.6.2 Method of measurement ............................................................................................................................. 21

8.6.2.1 RF Coupling to the test demodulator .................................................................................................... 21

8.6.2.2 Normal test conditions .......................................................................................................................... 22

8.6.2.3 Extreme test conditions ......................................................................................................................... 22

8.6.3 Limits .......................................................................................................................................................... 22

8.7 Adjacent channel power ................................................................................................................................... 22

8.7.1 Definition .................................................................................................................................................... 22

8.7.2 Method of measurement ............................................................................................................................. 22

8.7.3 Limits .......................................................................................................................................................... 23

8.8 Conducted spurious emissions conveyed to the antenna .................................................................................. 23

8.8.1 Definition .................................................................................................................................................... 23

8.8.2 Method of measurement ............................................................................................................................. 23

8.8.3 Limit ........................................................................................................................................................... 23

8.9 Cabinet radiation and conducted spurious emissions other than those conveyed to the antenna ..................... 23

8.9.1 Definitions .................................................................................................................................................. 23

8.9.2 Method of measurement ............................................................................................................................. 23

8.9.3 Limits .......................................................................................................................................................... 24

ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 178 V2.2.1 (2017-03)

8.10 Residual modulation of the transmitter ............................................................................................................ 25

8.10.1 Definition .................................................................................................................................................... 25

8.10.2 Method of measurement ............................................................................................................................. 25

8.10.3 Limit ........................................................................................................................................................... 25

8.11 Transient frequency behaviour of the transmitter ............................................................................................. 25

8.11.1 Definitions .................................................................................................................................................. 25

8.11.2 Method of measurement ............................................................................................................................. 26

8.11.3 Limits .......................................................................................................................................................... 27

9 Receiver .................................................................................................................................................. 29

9.1 Harmonic distortion and rated audio frequency output power ......................................................................... 29

9.1.1 Definition .................................................................................................................................................... 29

9.1.2 Methods of measurement ............................................................................................................................ 29

9.1.3 Limits .......................................................................................................................................................... 29

9.2 Audio frequency response ................................................................................................................................ 29

9.2.1 Definition .................................................................................................................................................... 29

9.2.2 Method of measurement ............................................................................................................................. 29

9.2.3 Limits .......................................................................................................................................................... 30

9.3 Maximum usable sensitivity ............................................................................................................................. 30

9.3.1 Definition .................................................................................................................................................... 30

9.3.2 Method of measurement ............................................................................................................................. 31

9.3.3 Limits .......................................................................................................................................................... 31

9.4 Co-channel rejection......................................................................................................................................... 31

9.4.1 Definition .................................................................................................................................................... 31

9.4.2 Method of measurement ............................................................................................................................. 31

9.4.3 Limit ........................................................................................................................................................... 31

9.5 Adjacent channel selectivity ............................................................................................................................. 32

9.5.1 Definition .................................................................................................................................................... 32

9.5.2 Method of measurement ............................................................................................................................. 32

9.5.3 Limits .......................................................................................................................................................... 32

9.6 Spurious response rejection .............................................................................................................................. 32

9.6.1 Definition .................................................................................................................................................... 32

9.6.2 Method of measurement ............................................................................................................................. 32

9.6.3 Limit ........................................................................................................................................................... 33

9.7 Intermodulation response ................................................................................................................................. 33

9.7.1 Definition .................................................................................................................................................... 33

9.7.2 Method of measurement ............................................................................................................................. 33

9.7.3 Limit ........................................................................................................................................................... 33

9.8 Blocking or desensitization .............................................................................................................................. 33

9.8.1 Definition .................................................................................................................................................... 33

9.8.2 Method of measurement ............................................................................................................................. 33

9.8.3 Limit ........................................................................................................................................................... 34

9.9 Conducted spurious emissions ......................................................................................................................... 34

9.9.1 Definition .................................................................................................................................................... 34

9.9.2 Method of measurement ............................................................................................................................. 34

9.9.3 Limit ........................................................................................................................................................... 34

9.10 Radiated spurious emissions............................................................................................................................. 34

9.10.1 Definition .................................................................................................................................................... 34

9.10.2 Method of measurements ............................................................................................................................ 34

9.10.3 Limit ........................................................................................................................................................... 35

9.11 Receiver noise and hum level ........................................................................................................................... 35

9.11.1 Definition .................................................................................................................................................... 35

9.11.2 Method of measurement ............................................................................................................................. 35

9.11.3 Limit ........................................................................................................................................................... 36

9.12 Squelch operation ............................................................................................................................................. 36

9.12.1 Definiti
...

Draft ETSI EN 301 178 V2.2.0 (2016-12)
HARMONISED EUROPEAN STANDARD
Portable Very High Frequency (VHF) radiotelephone equipment
for the maritime mobile service operating in the VHF bands
(for non-GMDSS applications only);
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 178 V2.2.0 (2016-12)
Reference
REN/ERM-TG26-532
Keywords
maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the

print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM

DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.

3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.

ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 178 V2.2.0 (2016-12)
Contents

Intellectual Property Rights ................................................................................................................................ 7

Foreword ............................................................................................................................................................. 7

Modal verbs terminology .................................................................................................................................... 7

1 Scope ........................................................................................................................................................ 8

2 References ................................................................................................................................................ 8

2.1 Normative references ......................................................................................................................................... 8

2.2 Informative references ........................................................................................................................................ 9

3 Definitions, symbols and abbreviations ................................................................................................... 9

3.1 Definitions .......................................................................................................................................................... 9

3.2 Symbols .............................................................................................................................................................. 9

3.3 Abbreviations ................................................................................................................................................... 10

4 General and operational requirements .................................................................................................... 10

4.1 Construction ..................................................................................................................................................... 10

4.2 Controls and indicators ..................................................................................................................................... 11

4.3 Microphone and loudspeaker ........................................................................................................................... 11

4.4 Safety precautions ............................................................................................................................................ 11

4.5 Labelling........................................................................................................................................................... 12

5 Technical requirements specifications ................................................................................................... 12

5.1 Environmental profile ....................................................................................................................................... 12

5.2 Conformance requirements .............................................................................................................................. 12

5.2.1 Switching time ............................................................................................................................................ 12

5.2.2 Class of emission and modulation characteristics ....................................................................................... 12

6 General conditions of measurement ....................................................................................................... 12

6.1 Arrangements for RF connections to the equipment ........................................................................................ 12

6.1.1 RF connections to integral antenna equipment ........................................................................................... 12

6.1.2 RF connection to equipment with a detachable antenna ............................................................................. 13

6.2 Arrangements for test signals applied to the receiver input .............................................................................. 13

6.3 Squelch ............................................................................................................................................................. 13

6.4 Normal test modulation .................................................................................................................................... 13

6.5 Artificial antenna .............................................................................................................................................. 13

6.6 Arrangements for test signals applied to the transmitter input ......................................................................... 13

6.7 Test channels .................................................................................................................................................... 13

6.8 Test conditions, power sources and ambient te mperat ures ............................................................................... 13

6.8.1 Normal and extreme test conditions............................................................................................................ 13

6.8.2 Test power source ....................................................................................................................................... 14

6.9 Normal test conditions ...................................................................................................................................... 14

6.9.1 Normal temperature and humidity .............................................................................................................. 14

6.9.2 Normal power sources ................................................................................................................................ 14

6.9.2.1 Battery power source............................................................................................................................. 14

6.9.2.2 Other power sources .............................................................................................................................. 14

6.10 Extreme test conditions .................................................................................................................................... 14

6.10.0 General ........................................................................................................................................................ 14

6.10.1 Extreme temperatures ................................................................................................................................. 14

6.10.2 Extreme values of test power sources ......................................................................................................... 14

6.10.2.1 Battery power source............................................................................................................................. 14

6.10.2.2 Other power sources .............................................................................................................................. 15

6.11 Procedure for tests at extreme temperatures ..................................................................................................... 15

6.12 Reference bandwidths for spurious measurements ........................................................................................... 15

7 Environmental tests ................................................................................................................................ 15

7.1 Procedure .......................................................................................................................................................... 15

7.2 Performance check ........................................................................................................................................... 15

7.3 Drop test ........................................................................................................................................................... 15

ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 178 V2.2.0 (2016-12)

7.3.1 Definition .................................................................................................................................................... 15

7.3.2 Method of measurement ............................................................................................................................. 16

7.3.3 Requirement ................................................................................................................................................ 16

7.4 Temperature tests ............................................................................................................................................. 16

7.4.1 Definition .................................................................................................................................................... 16

7.4.2 Dry heat ...................................................................................................................................................... 16

7.4.2.1 Definition .............................................................................................................................................. 16

7.4.2.2 Method of measurement ........................................................................................................................ 16

7.4.2.3 Requirement .......................................................................................................................................... 16

7.4.3 Damp heat ................................................................................................................................................... 16

7.4.3.1 Definition .............................................................................................................................................. 16

7.4.3.2 Method of measurement ........................................................................................................................ 17

7.4.3.3 Requirement .......................................................................................................................................... 17

7.4.4 Low temperature cycle ................................................................................................................................ 17

7.4.4.1 Definition .............................................................................................................................................. 17

7.4.4.2 Method of measurement ........................................................................................................................ 17

7.4.4.3 Requirement .......................................................................................................................................... 17

8 Transmitter ............................................................................................................................................. 17

8.1 Frequency error ................................................................................................................................................ 17

8.1.1 Definition .................................................................................................................................................... 17

8.1.2 Method of measurement ............................................................................................................................. 17

8.1.3 Limits .......................................................................................................................................................... 18

8.2 Carrier power .................................................................................................................................................... 18

8.2.1 Definitions .................................................................................................................................................. 18

8.2.2 Method of measurement ............................................................................................................................. 18

8.2.3 Limits, Normal and extreme test conditions ............................................................................................... 18

8.3 Frequency deviation ......................................................................................................................................... 18

8.3.1 Definition .................................................................................................................................................... 18

8.3.2 Maximum permissible frequency deviation ................................................................................................ 18

8.3.2.1 Method of measurement ........................................................................................................................ 18

8.3.2.2 Limits .................................................................................................................................................... 18

8.3.3 Reduction of frequency deviation at modulation frequencies above 3 kHz ................................................ 19

8.3.3.1 Method of measurement ........................................................................................................................ 19

8.3.3.2 Limits .................................................................................................................................................... 19

8.4 Sensitivity of the modulator, including microphone ........................................................................................ 20

8.4.1 Definition .................................................................................................................................................... 20

8.4.2 Method of measurement ............................................................................................................................. 20

8.4.3 Limits .......................................................................................................................................................... 20

8.5 Audio frequency response ................................................................................................................................ 20

8.5.1 Definition .................................................................................................................................................... 20

8.5.2 Method of measurement ............................................................................................................................. 20

8.5.3 Limit ........................................................................................................................................................... 20

8.6 Audio frequency harmonic distortion of the emission...................................................................................... 21

8.6.1 Definition .................................................................................................................................................... 21

8.6.2 Method of measurement ............................................................................................................................. 21

8.6.2.1 RF Coupling to the test demodulator .................................................................................................... 21

8.6.2.2 Normal test conditions .......................................................................................................................... 22

8.6.2.3 Extreme test conditions ......................................................................................................................... 22

8.6.3 Limits .......................................................................................................................................................... 22

8.7 Adjacent channel power ................................................................................................................................... 22

8.7.1 Definition .................................................................................................................................................... 22

8.7.2 Method of measurement ............................................................................................................................. 22

8.7.3 Limits .......................................................................................................................................................... 23

8.8 Conducted spurious emissions conveyed to the antenna .................................................................................. 23

8.8.1 Definition .................................................................................................................................................... 23

8.8.2 Method of measurement ............................................................................................................................. 23

8.8.3 Limit ........................................................................................................................................................... 23

8.9 Cabinet radiation and conducted spurious emissions other than those conveyed to the antenna ..................... 23

8.9.1 Definitions .................................................................................................................................................. 23

8.9.2 Method of measurement ............................................................................................................................. 23

8.9.3 Limits .......................................................................................................................................................... 24

ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 178 V2.2.0 (2016-12)

8.10 Residual modulation of the transmitter ............................................................................................................ 25

8.10.1 Definition .................................................................................................................................................... 25

8.10.2 Method of measurement ............................................................................................................................. 25

8.10.3 Limit ........................................................................................................................................................... 25

8.11 Transient frequency behaviour of the transmitter ............................................................................................. 25

8.11.1 Definitions .................................................................................................................................................. 25

8.11.2 Method of measurement ............................................................................................................................. 26

8.11.3 Limits .......................................................................................................................................................... 27

9 Receiver .................................................................................................................................................. 29

9.1 Harmonic distortion and rated audio frequency output power ......................................................................... 29

9.1.1 Definition .................................................................................................................................................... 29

9.1.2 Methods of measurement ............................................................................................................................ 29

9.1.3 Limits .......................................................................................................................................................... 29

9.2 Audio frequency response ................................................................................................................................ 29

9.2.1 Definition .................................................................................................................................................... 29

9.2.2 Method of measurement ............................................................................................................................. 29

9.2.3 Limits .......................................................................................................................................................... 30

9.3 Maximum usable sensitivity ............................................................................................................................. 30

9.3.1 Definition .................................................................................................................................................... 30

9.3.2 Method of measurement ............................................................................................................................. 31

9.3.3 Limits .......................................................................................................................................................... 31

9.4 Co-channel rejection......................................................................................................................................... 31

9.4.1 Definition .................................................................................................................................................... 31

9.4.2 Method of measurement ............................................................................................................................. 31

9.4.3 Limit ........................................................................................................................................................... 31

9.5 Adjacent channel selectivity ............................................................................................................................. 32

9.5.1 Definition .................................................................................................................................................... 32

9.5.2 Method of measurement ............................................................................................................................. 32

9.5.3 Limits .......................................................................................................................................................... 32

9.6 Spurious response rejection .............................................................................................................................. 32

9.6.1 Definition .................................................................................................................................................... 32

9.6.2 Method of measurement ............................................................................................................................. 32

9.6.3 Limit ........................................................................................................................................................... 33

9.7 Intermodulation response ................................................................................................................................. 33

9.7.1 Definition .................................................................................................................................................... 33

9.7.2 Method of measurement ............................................................................................................................. 33

9.7.3 Limit ........................................................................................................................................................... 33

9.8 Blocking or desensitization .............................................................................................................................. 33

9.8.1 Definition .................................................................................................................................................... 33

9.8.2 Method of measurement ............................................................................................................................. 33

9.8.3 Limit ........................................................................................................................................................... 34

9.9 Conducted spurious emissions ......................................................................................................................... 34

9.9.1 Definition .................................................................................................................................................... 34

9.9.2 Method of measurement ............................................................................................................................. 34

9.9.3 Limit ........................................................................................................................................................... 34

9.10 Radiated spurious emissions............................................................................................................................. 34

9.10.1 Definition .................................................................................................................................................... 34

9.10.2 Method of measurements ............................................................................................................................ 34

9.10.3 Limit ........................................................................................................................................................... 35

9.11 Receiver noise and hum level ........................................................................................................................... 35

9.11.1 Definition .................................................................................................................................................... 35

9.11.2 Method of measurement ............................................................................................................................. 35

9.11.3 Limit ........................................................................................................................................................... 36

9.12 Squelch operation ............................................................................................................................................. 36

9.12.1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.