SIST EN 62379-2:2009

Common control interface for networked digital audio and video products - Part 2: Audio (IEC 62379-2:2008)

This part of IEC 62379 specifies aspects of the common control interface of IEC 62379-1 that
are specific to audio.

Gemeinsame Steuerschnittstelle für netzwerkbetriebene digitale Audio- und Videogeräte - Teil 2: Audio (IEC 62379-2:2008)

Interface de commande commun destiné aux produits audio et vidéo numériques connectés en réseau - Partie 2: Audio (CEI 62379-2:2008)

L'IEC 62379-2:2008 précise les aspects de l'interface de commande commune de l'IEC 62379-1 qui sont spécifiques à l'équipement audio.

Skupni krmilni vmesnik za digitalne avdio in video izdelke, vključene v omrežje - 2. del: Avdio (IEC 62379-2:2008)

General Information

• Status: Published
• Publication Date: 20-Sep-2009
• ICS: 33.160.01 - Audio, video and audiovisual systems in general
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: AVM - Audio, video and multimedia systems and equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 19-Aug-2009
• Due Date: 24-Oct-2009
• Completion Date: 21-Sep-2009
• Ref Project: EN 62379-2:2009 - Common control interface for networked digital audio and video products - Part 2: Audio

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62379-2:2009
01-oktober-2009
6NXSQLNUPLOQLYPHVQLN]DGLJLWDOQHDYGLRLQYLGHRL]GHONHYNOMXþHQHYRPUHåMH
GHO$YGLR,(&
Common control interface for networked digital audio and video products - Part 2: Audio
(IEC 62379-2:2008)
Gemeinsame Steuerschnittstelle für netzwerkbetriebene digitale Audio- und Videogeräte
- Teil 2: Audio (IEC 62379-2:2008)
Interface de commande commun destiné aux produits audio et vidéo numériques
connectés en réseau - Partie 2: Audio (CEI 62379-2:2008)
Ta slovenski standard je istoveten z: EN 62379-2:2009
ICS:
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN 62379-2:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62379-2:2009

---------------------- Page: 2 ----------------------

SIST EN 62379-2:2009

EUROPEAN STANDARD
EN 62379-2

NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM

ICS 33.160.01


English version


Common control interface
for networked digital audio and video products -
Part 2: Audio
(IEC 62379-2:2008)


Interface de commande commun  Gemeinsame Steuerschnittstelle
destiné aux produits audio et vidéo für netzwerkbetriebene digitale
numériques connectés en réseau - Audio- und Videogeräte -
Partie 2: Audio Teil 2: Audio
(CEI 62379-2:2008) (IEC 62379-2:2008)




This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62379-2:2009 E

---------------------- Page: 3 ----------------------

SIST EN 62379-2:2009
EN 62379-2:2009 - 2 -
Foreword
The text of document 100/1405/FDIS, future edition 1 of IEC 62379-2, prepared by technical area 4,
Digital system interfaces and protocols, of IEC TC 100, Audio, video and multimedia systems and
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62379-2 on 2009-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2010-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2012-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62379-2:2008 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 62379-2:2009
- 3 - EN 62379-2:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 62379-1 2007 Common control interface for networked EN 62379-1 2007
digital audio and video products -
Part 1: General


AES3 2003 AES standard for digital audio engineering - - -
Serial transmission format for two-channel
linearly represented digital audio data


AES10 2008 AES recommended practice for digital audio - -
engineering - Serial Multichannel Audio Digital
Interface (MADI)


AES50 2005 AES standard for digital audio engineering - - -
High-resolution multi-channel audio
interconnection


1)
ITU-T - Pulse code modulation (PCM) of voice - -
Recommendation frequencies
G.711


1)
ITU-T - 7 kHz audio-coding within 64 kbit/s - -
Recommendation
G.722


1)
ITU-T - Characteristics of equipment for the coding of - -
Recommendation analogue high quality sound programme
J.41 signals for transmission on 384 kbit/s
channels


1)
ITU-T - Transmission of digital studio quality sound - -
Recommendation signals over H1 channels
J.57




1)
Undated reference.

---------------------- Page: 5 ----------------------

SIST EN 62379-2:2009

---------------------- Page: 6 ----------------------

SIST EN 62379-2:2009
IEC 62379-2
Edition 1.0 2008-09
INTERNATIONAL
STANDARD


Common control interface for networked digital audio and video products –
Part 2: Audio


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XC
ICS 33.160.01 ISBN 2-8318-9987-7
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 62379-2:2009
– 2 – 62379-2 © IEC:2008(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Terms, definitions and abbreviations .7
3.1 Abbreviations .7
4 Audio format definitions .8
4.1 Audio signal format definitions.8
4.1.1 Audio parameters .8
4.1.2 Audio signal formats .9
4.2 Audio transport format definitions .12
4.3 Audio metadata format definitions .12
5 MIB definitions for audio blocks .13
5.1 General .13
5.2 Type definitions.13
5.2.1 Textual conventions.13
5.2.2 Sequences .15
5.3 Audio port and associated managed object type definitions .17
5.3.1 Generic port functionality.17
5.3.2 AES3 ancillary data .18
5.3.3 Phantom power .19
5.3.4 Audio locked to reference .19
5.4 Other audio block and associated managed object type definitions.20
5.4.1 Audio mixer blocks .20
5.4.2 Audio crosspoint blocks .23
5.4.3 Audio clip player blocks .26
5.4.4 Audio limiter blocks .29
5.4.5 Audio converter blocks .31
5.4.6 Audio level alarm blocks.32
6 Status broadcasts.34
6.1 General .34
6.2 Type definitions.34
6.2.1 Textual conventions.34
6.2.2 Sequences .34
6.3 Audio formats mapping.34
6.3.1 audioFormatsMapTable .35
6.3.2 audioFormatsMapEntry.35
6.3.3 afmNumber.35
6.3.4 afmFormat.35
6.4 Page formats.35
6.4.1 Audio port page .35
6.4.2 AES3 ancillary data page .35
6.4.3 Audio mixer page.36
6.4.4 Audio crosspoint page .36
6.4.5 Audio clip player page .37
6.4.6 Audio limiter page.37

---------------------- Page: 8 ----------------------

SIST EN 62379-2:2009
62379-2 © IEC:2008(E) – 3 –
6.4.7 Audio converter page .38
6.4.8 Audio level alarm page .38
6.5 Page groups.39
6.5.1 audioPorts .39
6.5.2 standardAudioBlocks.39
6.5.3 audioAlarms .40
Annex A (informative) Machine-readable audio format definitions .41
Annex B (informative) Machine-readable audio block definitions .56
Annex C (informative) Machine-readable status page group definitions.74
Annex D (informative) Machine-readable status page MIB definitions .75
Annex E (informative) Worked examples.77
Annex F (informative) Tree of example audio formats .86

Figure 1 – Audio port blocks .17
Figure 2 – Audio mixer block.21
Figure 3 – Audio crosspoint block .23
Figure 4 – Audio clip player block .26
Figure 5 – Audio limiter block.29
Figure 6 – Audio converter block.31
Figure 7 – Audio level alarm block .32

Table 1 – Managed objects for audio ports .17
Table 2 – Managed objects for AES3 ancillary data .18
Table 3 – Managed objects for phantom power .19
Table 4 – Managed objects for audio locked .20
Table 5 – Managed objects for audio mixer blocks .21
Table 6 – Managed objects for audio crosspoint blocks .23
Table 7 – Managed objects for audio clip player blocks.27
Table 8 – Managed objects for audio limiter blocks .30
Table 9 – Managed objects for audio converter blocks.31
Table 10 – Managed objects for audio level alarm blocks.33
Table 11 – Managed objects for audio format mappings.35
Table 12 – Status entries for audio port page.35
Table 13 – Status entries for AES3 ancillary data page.36
Table 14 – Status entries for audio mixer page .36
Table 15 – Status entries for audio crosspoint page.37
Table 16 – Status entries for audio clip player page.37
Table 17 – Status entries for audio limiter page .38
Table 18 – Status entries for audio converter page .38
Table 19 – Status entries for audio level alarm page.39

---------------------- Page: 9 ----------------------

SIST EN 62379-2:2009
– 4 – 62379-2 © IEC:2008(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

COMMON CONTROL INTERFACE FOR NETWORKED DIGITAL AUDIO AND
VIDEO PRODUCTS –

Part 2: Audio


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62379-2 has been prepared technical area 4: Digital system
interfaces and protocols, of IEC technical committee 100: Audio, video and multimedia
systems and equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
100/1405/FDIS 100/1445/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 10 ----------------------

SIST EN 62379-2:2009
62379-2 © IEC:2008(E) – 5 –
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 11 ----------------------

SIST EN 62379-2:2009
– 6 – 62379-2 © IEC:2008(E)
INTRODUCTION
IEC 62379 specifies the common control interface, a protocol for managing equipment which
conveys audio and/or video across digital networks.
This part of IEC 62379 specifies those aspects that are specific to audio equipment.
An introduction to the common control interface is given in IEC 62739-1.

---------------------- Page: 12 ----------------------

SIST EN 62379-2:2009
62379-2 © IEC:2008(E) – 7 –
COMMON CONTROL INTERFACE FOR NETWORKED DIGITAL AUDIO AND
VIDEO PRODUCTS –

Part 2: Audio



1 Scope
This part of IEC 62379 specifies aspects of the common control interface of IEC 62379-1 that
are specific to audio.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
AES3-2003, AES standard for digital audio — Digital input-output interfacing — Serial
transmission format for two-channel linearly represented digital audio data
AES10-2003, AES recommended practice for digital audio engineering – Serial multichannel
audio digital interface (MADI)
AES50-2005, AES standard for digital audio engineering – High-resolution multi-channel
audio interconnection (HRMAI)
IEC 62379-1:2007, Common control interface for networked audio and video products –
Part 1: General
ITU-T Recommendation G.711, Pulse code modulation (PCM) of voice frequencies
ITU-T Recommendation G.722, 7kHz audio-coding within 64 kbit/s
ITU-T Recommendation J.41, Characteristics of equipment for the coding of analogue high
quality sound programme signals for transmission on 384 kbit/s channels
ITU-T Recommendation J.57, Transmission of digital studio quality sound signals over H1
channels
3 Terms, definitions and abbreviations
For the purposes of this document, the terms and definitions given in IEC 62379-1 apply
along with the following abbreviations.
3.1 Abbreviations
3.1.1
pulse code modulation
PCM
3.1.2
motion pictures expert group
MPEG

---------------------- Page: 13 ----------------------

SIST EN 62379-2:2009
– 8 – 62379-2 © IEC:2008(E)
3.1.3
advanced audio coding
AAC
4 Audio format definitions
4.1 Audio signal format definitions
At any point in the audio signal chain, the audio data will be in a particular format. For
management purposes, the format shall be identified by an object identifier, either a “common
control interface standard” object identifier defined in this standard or an object identifier
defined elsewhere.
NOTE Permitting audio format identifiers to be defined outside this standard allows use of proprietary formats
within the standard protocol and also allows industry standard formats to emerge that may eventually be
incorporated into future revisions of this standard.
4.1.1 Audio parameters
4.1.1.1 General
The definitions in 4.1.2 make reference to parameters which provide additional information
about the format. These parameters shall be mapped to sub-identifier values as specified in
the other subclauses of 4.1.1. Any parameter may be unspecified.
The sub-identifier values shall be appended to the object identifiers as additional arcs, in the
order in which the parameters are listed in the relevant subclause of 4.1.2; except that if a
parameter is unspecified and either it is the last parameter or all subsequent parameters are
also unspecified, then it shall be omitted.
NOTE For all parameters, "unspecified" is coded as zero, so this rule ensures that the OID does not end with a
zero arc.
EXAMPLE: If the last two parameters are bit depth and sampling frequency, then 16-bit 48kHz would be coded as
.16.48000, 16-bit (with sampling frequency unspecified) as .16, and 48kHz (with bit depth unspecified) as .0.48000.
4.1.1.2 Channel arrangement
The sub-identifier for channel arrangement shall be a value of the following type:
ChannelArrangement ::= INTEGER {
 unspecified     (0),
 discreteMono    (1),
 stereo       (2),
 jointStereo     (3),
 surround      (4),
 surroundWithDownmix (5)
} (unspecified. surroundWithDownmix)

discreteMono shall indicate that each channel (if there is more than one) is a separate
audio signal.
stereo should only be used with an even number of channels, and shall indicate that each
pair of channels (if there is more than one pair) is a separate stereo audio signal, with the first
channel of the pair being the left channel.
jointStereo should only be used with an even number of channels, and shall indicate that
each pair of channels (if there is more than one pair) is a separate stereo audio signal, with
the first channel of the pair being the M channel and the second the S channel.

---------------------- Page: 14 ----------------------

SIST EN 62379-2:2009
62379-2 © IEC:2008(E) – 9 –
surround and surroundWithDownmix should only be used with 3 to 8 channels (inclusive),
Each shall indicate that the first six channels contain left, right, centre, low frequency effects,
left surround, and right surround respectively. surround shall indicate that the next two
channels contain left and right channels (respectively) of a stereo signal suitable for matrix
decoding. surroundWithDownmix shall indicate that the next two channels contain left and
right channels (respectively) of a stereo downmix.
Where more than one arrangement can be used to describe a format, the smallest applicable
value should be used.
EXAMPLE 1 A single stereo pair (2 channels) could be described by values stereo (2), surround (4), or
surroundWithDownmix (5). The smallest of these values, i.e. 2, should be used.
EXAMPLE 2 Surround sound with no accompanying stereo signal (6 channels) could be described by values
surround (4), or surroundWithDownmix (5). The smaller of these values, i.e. 4, should be used.
4.1.1.3 Number of channels
The sub-identifier for number of channels shall be a value of the following type:
NumberChannels ::= INTEGER
-- An integer representing the number of audio channels
-- A value of zero shall indicate unspecified.

4.1.1.4 Bit depth
The sub-identifier for bit depth shall be a value of the following type:
BitDepth ::= INTEGER
-- An integer representing the audio bit depth in bits per sample.
-- A value of zero shall indicate unspecified.

4.1.1.5 Sampling frequency
The sub-identifier for sampling frequency shall be a value of the following type:
SamplingFrequency ::= INTEGER
-- An integer representing the audio sampling frequency in Hz
-- A value of zero shall indicate unspecified.

4.1.1.6 Bit rate
The sub-identifier for bit rate shall be a value of the following type:
BitRate ::= INTEGER
-- An integer representing the bit rate of the encoded signal in bits per
--   second.
-- A value of zero shall indicate unspecified.

4.1.2 Audio signal formats
Audio signal formats shall be rooted at the following location in the MIB tree:
iec62379       OBJECT IDENTIFIER ::= { iso(1) standard(0) 62379 }

audioFormat     OBJECT IDENTIFIER ::= { iec62379 audio(2) format(2) }

audioSignalFormat  OBJECT IDENTIFIER ::= { audioFormat signal(1) }

The following definitions shall be used to identify the specified formats.

---------------------- Page: 15 ----------------------

SIST EN 62379-2:2009
– 10 – 62379-2 © IEC:2008(E)
NOTE Annex A contains an exemplar set of formats defined by this standard.
4.1.2.1 Unspecified audio
unspecifiedAudio   OBJECT IDENTIFIER ::=
                   { audioSignalFormat unspecified(0) }
-- wildcard – any supported format allowed

4.1.2.2 No audio
noAudio       OBJECT IDENTIFIER ::= { audioSignalFormat none(1) }
-- indicates the output is muted

4.1.2.3 Analogue audio
analogueAudio    OBJECT IDENTIFIER ::= { audioSignalFormat analogue(2)
}
-- analogue audio

The analogue audio identifier shall have two parameters. The first shall be the channel
arrangement and the second shall be the number of channels.
4.1.2.4 PCM audio
pcmAudio       OBJECT IDENTIFIER ::= { audioSignalFormat pcm(3) }
-- linear PCM audio

The linear PCM format identifier shall have four parameters. The first shall be the channel
arrangement, the second shall be the number of channels, the third shall be the bit depth and
the fourth shall be the sampling frequency.
4.1.2.5 MPEG-1 layer 2 audio
mp2Audio       OBJECT IDENTIFIER ::= { audioSignalFormat mp2(4) }
-- MPEG-1 layer 2 audio

The MP2 format identifier shall have four parameters. The first shall be the channel
arrangement, the second shall be the number of channels, the third shall be the sampling
frequency, and the fourth shall be the bit rate.
4.1.2.6 MPEG-1 layer 3 audio
mp3Audio       OBJECT IDENTIFIER ::= { audioSignalFormat mp3(5) }
-- MPEG-1 layer 3 audio

The MP3 format identifier shall have four parameters. The first shall be the channel
arrangement, the second shall be the number
...