SIST EN IEC 62841-4-3:2021/oprAB:2024
(Amendment)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 4-3: Besondere Anforderungen für personengeführte Rasenmäher
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 4-3: Exigences particulières pour tondeuses à gazon à conducteur à pied
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-3. del: Posebne zahteve za ročno vodene vrtne kosilnice - Dopolnilo AB
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62841-4-3:2021/oprAB:2024
01-maj-2024
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-
3. del: Posebne zahteve za ročno vodene vrtne kosilnice - Dopolnilo AB
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-
behind lawnmowers
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 4-3: Besondere Anforderungen für
personengeführte Rasenmäher
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 4-3: Exigences particulières pour tondeuses à gazon à conducteur à
pied
Ta slovenski standard je istoveten z: EN IEC 62841-4-3:2021/prAB:2024
ICS:
25.140.20 Električna orodja Electric tools
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN IEC 62841-4-3:2021/oprAB:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62841-4-3:2021/oprAB:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 62841-4-3:2021/oprAB:2024
EUROPEAN STANDARD DRAFT
EN IEC 62841-4-3:2021
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAB
March 2024
ICS 65.060.70 -
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 4-3: Particular
requirements for pedestrian controlled walk-behind lawnmowers
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 4-3: Exigences transportable Werkzeuge und Rasen- und
particulières pour tondeuses à gazon à conducteur à pied Gartenmaschinen - Sicherheit - Teil 4-3: Besondere
Anforderungen für personengeführte Rasenmäher
This draft amendment prAB, if approved, will modify the European Standard EN IEC 62841-4-3:2021; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2024-05-31.
It has been drawn up by CLC/TC 116.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 79350 Ref. No. EN IEC 62841-4-3:2021/prAB:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62841-4-3:2021/oprAB:2024
EN IEC 62841-4-3:2021/prAB:2024 (E)
1 European foreword
2 This document (EN IEC 62841-4-3:2021/prAB:2024) has been prepared by CLC/TC 116 “Safety and
3 environmental aspects of motor-operated electric tools”.
4 This document is currently submitted to the Enquiry.
5 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 48 months
conflicting with this document have to be (to be confirmed or
withdrawn
modified when voting)
6 This document modifies by common modifications EN IEC 62841-4-3:2021/prA1:2024, which consists of
7 the text of 116/xxx/CDV (future IEC 62841-4-3:2020
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.