M/605 - MACHINERY

This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held fastener driving tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly.
IEC 62841-1:2014, Clause 1 is applicable, except as follows:
Addition: This document applies to hand-held fastener driving tools
- intended for driving fasteners into or through concrete, fabric, fiberboard, metal, plastic, wood, wood products, cartons, and other materials; and
- whose energy to drive the fastener is derived directly or indirectly from an electric motor or magnetic drive.
This document does not apply to pneumatically driven tools where the compressed gas comes from an external source, such as a compressor or a tank.
This document does not apply to tools powered by combustible gases, even if electrically ignited.
NOTE 101 Tools powered by compressed air or combustible gases are covered by ISO 11148-13:2017.

IEC 62841-2-16:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held fastener driving tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly. IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to hand-held fastener driving tools - intended for driving fasteners into or through concrete, fabric, fiberboard, metal, plastic, wood, wood products, cartons, and other materials; and - whose energy to drive the fastener is derived directly or indirectly from an electric motor or magnetic drive. This document does not apply to pneumatically driven tools where the compressed gas comes from an external source, such as a compressor or a tank. This document does not apply to tools powered by combustible gases, even if electrically ignited. NOTE 101 Tools powered by compressed air or combustible gases are covered by ISO 11148-13:2017.

D164/C043: DOW = DOR + 48 months

This European Standard deals with the safety of electrical appliances for household environment and commercial purposes, their rated voltage being not more than 250 V for single-phase and 480 V for others

This document provides requirements and recommendations to prevent accidental and intentional corruption of machines, including malicious third-party actions resulting in hazardous situations. This document applies to - hardware components, including interfaces to remote devices and control systems, that can transmit signals or data - software and data if they could influence the safety of the machine. This document will address the requirements of ((EU) 2023/1230 – Annex III, 1.1.9.), and associated requirements of (Annex III, 1.2.1. a) and f)). Note 1 Topics can overlap with the domain of cybersecurity but are not necessarily identical in their coverage. Note 2 This standard does not cover the safety of control systems in machinery.

This document provides requirements and recommendations to prevent accidental and intentional corruption of machines, including malicious third-party actions resulting in hazardous situations. This document applies to
- hardware components, including interfaces to remote devices and control systems, that can transmit signals or data
- software and data
if they could influence the safety of the machine.
This document will address the requirements of ((EU) 2023/1230 – Annex III, 1.1.9.), and associated requirements of (Annex III, 1.2.1. a) and f)).
Note 1 Topics can overlap with the domain of cybersecurity but are not necessarily identical in their coverage.
Note 2 This standard does not cover the safety of control systems in machinery.

IEC 62841-3-16:2025 applies to transportable belt sanders, disc sanders and belt/disc sanders which are equipped with – a sanding belt; or – a sanding disc; or – a sanding belt and a sanding disc for sanding solid materials. This document does not apply to hand-held disc-type sanders. NOTE 101 Hand-held disc-type sanders are covered by IEC 62841-2-3. This document does not apply to hand-held belt sanders. NOTE 102 Hand-held belt sanders are covered by IEC 62841-2-4. This Part 3-16 is to be used in conjunction with the first edition of IEC 62841-1:2014 and IEC 62841-1:2014/AMD1:2025. This Part 3-16 supplements or modifies the corresponding clauses in IEC 62841-1:2014, so as to convert it into the IEC Standard: Particular requirements for transportable belt sanders, disc sanders and belt/disc sanders. Where a particular subclause of IEC 62841-1:2014 is not mentioned in this Part 3-16, that subclause applies as far as relevant. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1:2014 is to be adapted accordingly. NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.

This European Standard deals with the safety of electrical appliances for household environment and commercial purposes, their rated voltage being not more than 250 V for single-phase and 480 V for others

D164/C043: DOW = DOR + 48 months

IEC 62841-3-16:2025 applies to transportable belt sanders, disc sanders and belt/disc sanders which are equipped with
– a sanding belt; or
– a sanding disc; or
– a sanding belt and a sanding disc
for sanding solid materials.
This document does not apply to hand-held disc-type sanders.
NOTE 101 Hand-held disc-type sanders are covered by IEC 62841-2-3.
This document does not apply to hand-held belt sanders.
NOTE 102 Hand-held belt sanders are covered by IEC 62841-2-4.
This Part 3-16 is to be used in conjunction with the first edition of IEC 62841-1:2014 and IEC 62841-1:2014/AMD1:2025.
This Part 3-16 supplements or modifies the corresponding clauses in IEC 62841-1:2014, so as to convert it into the IEC Standard: Particular requirements for transportable belt sanders, disc sanders and belt/disc sanders.
Where a particular subclause of IEC 62841-1:2014 is not mentioned in this Part 3-16, that subclause applies as far as relevant. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1:2014 is to be adapted accordingly.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.