SIST EN ISO 2143:2010
(Main)Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2010)
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2010)
This International Standard specifies a method of estimating the loss of absorptive power of anodic oxidation coatings that have undergone a sealing treatment, by dye absorption after acid pretreatment. The method is suitable for use as a production control method and is applicable to anodic oxidation coatings which may be subjected to weathering or aggressive environments, or where resistance to staining is important. The method is not applicable to those coatings that:
a) are formed on alloys containing more than 2 % copper or 4 % silicon;
b) are sealed by the dichromate process;
c) have been given supplementary processing, e.g. oiling, waxing or lacquering;
d) are coloured in deep shades;
e) are less than 3 μm thick.
The method is less appropriate where nickel or cobalt salts, or organic additives, have been added to the sealing bath.
Anodisieren von Aluminium und Aluminiumlegierungen - Abschätzung der Anfärbbarkeit von anodisch erzeugten Oxidschichten nach dem Verdichten - Farbtropfentest mit vorheriger Säurebehandlung (ISO 2143:2010)
Diese Internationale Norm legt ein Verfahren zur Abschätzung der Anfärbbarkeit von verdichteten, anodisch
erzeugten Oxidschichten durch den Farbtropfentest mit vorheriger Säurebehandlung fest.
Das Verfahren ist zur Produktionsüberwachung geeignet und auf anodisch erzeugte Oxidschichten
anwendbar, die einer Bewitterung oder aggressiven Umwelteinflüssen ausgesetzt werden oder bei denen eine
Widerstandsfähigkeit gegenüber Fleckenbildung wichtig ist.
Das Verfahren ist nicht für Schichten anwendbar, die:
a) auf Legierungen, die mehr als 2 % Kupfer oder 4 % Silicium enthalten, erzeugt wurden;
b) in Dichromatlösungen verdichtet wurden;
c) einer zusätzlichen Behandlung unterzogen wurden, z. B. Einölen, Einwachsen oder Lackieren;
d) in dunklen Farbtönen eingefärbt sind;
e) eine Schichtdicke von weniger als 3 μm aufweisen.
Das Verfahren ist weniger geeignet, wenn dem Verdichtungsbad Nickel- oder Cobaltsalze oder organische
Zusätze zugesetzt wurden.
Anodisation de l'aluminium et de ses alliages - Appréciation de la perte du pouvoir absorbant des couches anodiques après colmatage - Essai à la goutte de colorant avec action acide préalable (ISO 2143:2010)
L'ISO 2143:2010 spécifie une méthode permettant d'apprécier la perte du pouvoir absorbant des couches anodiques ayant subi un traitement de colmatage, par un essai de coloration après une action acide préalable.
La méthode convient au contrôle de production et s'applique aux couches anodiques qui peuvent être soumises aux intempéries ou à des milieux agressifs, ou lorsque la résistance aux taches est importante.
La méthode n'est pas applicable aux couches qui:
sont formées sur les alliages contenant plus de 2 % de cuivre ou 4 % de silicium,
sont colmatées dans des solutions contenant du dichromate,
ont subi un traitement supplémentaire; par exemple huile, cire ou laque,
sont colorées de couleurs foncées, ou
ont une épaisseur inférieure à 3 µm.
La méthode est moins appropriée lorsque des sels de nickel ou de cobalt ou des additifs organiques ont été ajoutés au bain de colmatage.
Anodizacija aluminija in aluminijevih zlitin - Ocena izgube moči absorbirnosti anodnooksidiranih prevlek po tesnjenju por - Kapljični preskus z barvilom ob predhodni kislinski obdelavi (ISO 2143:2010)
Ta mednarodni standard določa metodo ocenjevanja izgube moči absorbirnosti anodno oksidiranih prevlek, ki so bile podvržene postopku tesnjenja z absorpcijo barvila, ki sledi predhodni kislinski obdelavi. Ta metoda je primerna, da se uporablja kot metoda za kontrolo proizvodnje, ter se uporablja za anodno oksidirane prevleke, ki so lahko podvržene preperevanju ali agresivnim okoljem, ali kjer je pomembna odpornost proti madežem. Metoda ni primerna za prevleke, ki:
a) nastanejo na zlitinah, katere vsebujejo več kot 2 % bakra in 4 % silicija;
b) so tesnjene z dvobarvnim postopkom;
c) so bile dodatno obdelane, npr. z oljenjem, voskanjem ali lakirane;
d) so barvane v temnih odtenkih;
e) so debele manj kot 3 μm.
Metoda je manj primerna, kadar so bili kopeli za tesnjenje dodana nikljeva ali kobaltova sol ali organski dodatki.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DEVRUELUQRVWLAnodisieren von Aluminium und Aluminiumlegierungen - Abschätzung der Anfärbbarkeit von anodisch erzeugten Oxidschichten nach dem Verdichten - Farbtropfentest mit vorheriger Säurebehandlung (ISO 2143:2010)Anodisation de l'aluminium et de ses alliages - Appréciation de la perte du pouvoir absorbant des couches anodiques après colmatage - Essai à la goutte de colorant avec action acide préalable (ISO 2143:2010)Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2010)77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys25.220.20Površinska obdelavaSurface treatmentICS:Ta slovenski standard je istoveten z:EN ISO 2143:2010SIST EN ISO 2143:2010en,fr,de01-oktober-2010SIST EN ISO 2143:2010SLOVENSKI
STANDARDSIST EN 12373-4:19991DGRPHãþD
SIST EN ISO 2143:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 2143
July 2010 ICS 25.220.20 Supersedes EN 12373-4:1998English Version
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2010)
Anodisation de l'aluminium et de ses alliages - Appréciation de la perte du pouvoir absorbant des couches anodiques après colmatage - Essai à la goutte de colorant avec action acide préalable (ISO 2143:2010)
Anodisieren von Aluminium und Aluminiumlegierungen - Abschätzung der Anfärbbarkeit von anodisch erzeugten Oxidschichten nach dem Verdichten - Farbtropfentest mit vorheriger Säurebehandlung (ISO 2143:2010) This European Standard was approved by CEN on 2 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 2143:2010: ESIST EN ISO 2143:2010
EN ISO 2143:2010 (E) 2 Contents Page Foreword .3SIST EN ISO 2143:2010
EN ISO 2143:2010 (E) 3 Foreword This document (EN ISO 2143:2010) has been prepared by Technical Committee ISO/TC 79 “Light metals and their alloys” in collaboration with Technical Committee CEN/TC 132 “Aluminium and aluminium alloys” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at the latest by January 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12373-4:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 2143:2010 has been approved by CEN as a EN ISO 2143:2010 without any modification. SIST EN ISO 2143:2010
SIST EN ISO 2143:2010
Reference numberISO 2143:2010(E)© ISO 2010
INTERNATIONAL STANDARD ISO2143Second edition2010-07-01Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing —Dye-spot test with prior acid treatment Anodisation de l'aluminium et de ses alliages — Appréciation de la perte du pouvoir absorbant des couches anodiques après colmatage —Essai à la goutte de colorant avec action acide préalable
SIST EN ISO 2143:2010
ISO 2143:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2010 – All rights reserved
SIST EN ISO 2143:2010
ISO 2143:2010(E) © ISO 2010 – All rights reserved iii Contents Page Foreword.iv Introduction.v 1 Scope.1 2 Principle.1 3 Reagents.1 4 Test specimens.2 5 Procedure.2 6 Expression of results.3 7 Test report.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.