iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 61439-1:2021/AC:2022

(Corrigendum)

Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2020/COR1:2021)

Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2020/COR1:2021)

IEC Corrected version

Niederspannungs-Schaltgerätekombinationen - Teil 1: Allgemeine Festlegungen (IEC 61439-1:2020/COR1:2021)

Ensembles d’appareillage à basse tension - Partie 1: Règles générales (IEC 61439-1:2020/COR1:2021)

Sestavi nizkonapetostnih stikalnih in krmilnih naprav - 1. del: Splošna pravila - Popravek AC (IEC 61439-1:2020/COR1:2021)

General Information

Status
Published
Publication Date
02-Feb-2022
ICS
29.130.20 - Low voltage switchgear and controlgear
Technical Committee
SKA - Switchgear and control gear
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2022
Due Date
08-Apr-2022
Completion Date
03-Feb-2022
Directive
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Mandate
M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
Ref Project
EN IEC 61439-1:2021/AC:2022-01 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules

Relations

Corrects
SIST EN IEC 61439-1:2021 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2020)
Effective Date
21-Dec-2021

Buy Standard

EN IEC 61439-1:2021/AC:2022EN IEC 61439-1:2021/AC:2022
PreviousNext
Corrigendum
EN IEC 61439-1:2021/AC:2022
English and French language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61439-1:2021/AC:2022
01-marec-2022
Sestavi nizkonapetostnih stikalnih in krmilnih naprav - 1. del: Splošna pravila -
Popravek AC (IEC 61439-1:2020/COR1:2021)
Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-
1:2020/COR1:2021)
Niederspannungs-Schaltgerätekombinationen - Teil 1: Allgemeine Festlegungen (IEC
61439-1:2020/COR1:2021)
Ensembles d’appareillage à basse tension - Partie 1: Règles générales (IEC 61439-
1:2020/COR1:2021)
Ta slovenski standard je istoveten z: EN IEC 61439-1:2021/AC:2022-01
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN IEC 61439-1:2021/AC:2022 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61439-1:2021/AC:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 61439-1:2021/AC:2022


EUROPEAN STANDARD EN IEC 61439-
1:2021/AC:2022-01
NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2022

ICS 29.130.20
English Version
Low-voltage switchgear and controlgear assemblies - Part 1:
General rules
(IEC 61439-1:2020/COR1:2021)
Ensembles d'appareillage à basse tension - Partie 1: Niederspannungs-Schaltgerätekombinationen - Teil 1:
Règles générales Allgemeine Festlegungen
(IEC 61439-1:2020/COR1:2021) (IEC 61439-1:2020/COR1:2021)
This corrigendum becomes effective on 21 January 2022 for incorporation in the English language version of the EN.



European Committee for Electrotechnical Standar
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60947-6-2:2023/AC:2023(Corrigendum)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2020/COR2:2023)
EN IEC 60947-6-2:2023/AC:2023-07
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP IEC TR 61439-0:2023(Main)
Low-voltage switchgear and controlgear assemblies- Part 0: Guidance to specifying assemblies
IEC TR 61439-0:2022

IEC TR 61439-0:2022 standards for low-voltage switchgear and controlgear assemblies, there are system and application details that are specified by the specifier to enable the manufacturer to produce an assembly that meets the needs and expectations of the specifier.
IEC/TR 61439-0:2022, identifies from the specifier’s perspective those functions and characteristics that are defined when specifying assemblies. It provides:
an explanation of the assembly characteristics and options within the IEC 61439 series;
a guidance on how to select the appropriate options and define characteristics so as to meet specific application needs; and
an assistance in the specification of assemblies.  References within this document to the interface characteristics of an assembly and the requirements with which they will comply assume that the assembly is designed, manufactured, and verified in accordance with the relevant part of the IEC 61439 series.
This third edition cancels and replaces the second edition published in 2013. It constitutes a technical revision.
This third edition includes the following significant technical changes with respect to the previous edition:  
alignment with IEC 61439-1:2020;
addition of new content in Clause 13 regarding current ratings;
addition of a new subclause 12.8.1 detailing the fundamentals of the forms of internal separation;
alignment of Annex B with Annex AA of 61439-2:2020;
removal of the annexes detailing items subject to agreement between specifier and manufacturer for all product parts as not all of them can always be up to date

  • Technical report
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    136 pages
    English and French language
    sale 15% off
SIST
SIST EN IEC 60947-6-1:2023(Main)
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment (IEC 60947-6-1:2021)
EN IEC 60947-6-1:2023

This part of EN 60947applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-8:2023(Main)
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines (IEC 60947-8:2021)
EN IEC 60947-8:2023

This part of IEC 60947 series specifies requirements for control units, which control a switching device in response to the PTC thermistors incorporated in rotating electrical machines and the industrial application.
It specifies requirements for that type of system comprising a positive temperature coefficient (PTC) thermistor having particular characteristics, and its associated control unit.
This document includes:
- the characteristics, construction, performance and tests of the control unit; and
- its association with a PTC thermistor designated "Mark A".
This document does not cover:
- the incorporation of thermal protections into rotating machines and their maximum winding temperature. See IEC 60034-11;
- use of the product within explosive atmospheres (see IEC 60079 series);
- software and firmware requirements;
NOTE 1 Guidance on embedded software is given in IEC TR 63201.
- cyber security aspects (see IEC TS 63208).
NOTE 2 It is not possible to specify all the requirements for the operating characteristics of a control unit, as they are dependent on some aspects of the PTC thermistors. Some aspects of the requirements of the thermal protector system can only be specified when account is taken of the characteristics of the rotating machine to be protected and the method of installation of the PTC thermistor within the machine.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-6-2:2023(Main)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2020 + COR1:2021)
EN IEC 60947-6-2:2023

Applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated voltage not exceeding 1 000 V a.c. or 1 500 V d.c. CPSs are intended to provide both protective and control functions for circuits and are operated otherwise than by hand. They may also fulfil additional functions, such as isolation.

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-4-2:2023(Main)
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starters (IEC 60947-4-2:2020)
EN IEC 60947-4-2:2023

IEC 60947-4-2:2020 applies to semiconductor motor controllers, starters and soft-starters which can include a series mechanical switching device, intended to be connected to circuits the rated voltage of which does not exceed 1 000 V AC.
This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- scope exclusions;
- editorial correction of notes and hanging paragraphs;
- reference to IEC 62683-1;
- safety aspects related to:
- general aspects;
- limited energy circuits;
- electronic circuits;
- mention of dedicated wiring accessories;
- power consumption measurement;
- alignment to IEC 60947-1:2020.

  • Standard
    117 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-1:2021/AC:2023(Corrigendum)
Low-voltage switchgear and controlgear - Part 1: General rules (IEC 60947-1:2020/COR1:2022)
EN IEC 60947-1:2021/AC:2023-01
  • Corrigendum
    4 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-5-2:2020/A11:2022(Amendment)
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
EN IEC 60947-5-2:2020/A11:2022

EN-IEC 60947-5-2 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the presence of objects and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic field. Products covered by the scope of this document are not subjected to defined behaviours under fault conditions. Proximity switches with defined behaviour are covered by IEC 60947-5-3 and have to fulfil additional requirements. These proximity switches are self-contained, have semiconductor switching element(s) and are intended to be connected to circuits, the rated voltage of which does not exceed 250 V 50 Hz/60 Hz AC RMS or 300 V DC. Examples of typical applications for in-scope products: - factory automation and machinery industry; - logistic and packaging industry; - conveyor belts, lifts; - process industry; - power plants. Special applications (e.g. corrosive atmosphere) can cause additional requirements. This document is not intended to cover proximity switches with analogue outputs. The object of this document is to state for proximity switches: - definitions; - classification; - characteristics; - product information; - normal service, mounting and transport conditions; - constructional and performance requirements; - tests to verify rated characteristics. Products covered by the scope of this document are expected to be selected, installed, and maintained by skilled personnel only.

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-3:2021/AC:2022(Corrigendum)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2020/COR1:2021)
EN IEC 60947-3:2021/AC:2021-11

IEC corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61439-2:2021(Main)
Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies (IEC 61439-2:2020)
EN IEC 61439-2:2021

This part of IEC 61439 defines the specific requirements for the power switchgear and
controlgear assembly (abbreviated ‘PSC-assembly’ throughout this document see 3.1.101) as
follows:
• assemblies for which the rated voltage does not exceed 1 000 V AC or 1 500 V DC;
• assemblies designed for a nominal frequency of the incoming supply or supplies not
exceeding 1 000 Hz;
NOTE 1 Frequencies above 1 kHz are considered as high frequencies, see also IEC 60664-1:2007, 5.3.3.2.5
to take into account additional constraints to insulation coordination.
• assemblies intended for indoor and outdoor applications;
• stationary or movable assemblies with or without enclosures;
• assemblies intended for use in connection with the generation, transmission, distribution
and conversion of electrical energy, and for the control of equipment consuming electrical
energy and for associated data processing;
• assemblies designed for use under special service conditions, for example in ships and in
rail vehicles, provided that the other relevant specific requirements are complied with;
NOTE 2 Supplementary requirements for assemblies in ships are covered by IEC 60092-302-2.
This document also applies to assemblies for use in photovoltaic installations, designated as
photovoltaic assemblies (PVA). The particular characteristics, specific service conditions and
the requirements for PVA’s are included in Annexes DD, EE and FF.
This document provides supplementary requirements for PSC-assemblies intended for use as
part of the electrical equipment of machines and can be applied in addition to the
requirements given in IEC 60204-1.
This document applies to all assemblies whether they are designed, manufactured and
verified on a one-off basis or fully standardised and manufactured in quantity.
The manufacture and/or assembly can be carried out by an entity other than the original
manufacturer (see 3.10.1 of IEC 61439-1:2020).
This document does not apply to individual devices, for example, circuit-breakers, fuse
switches and self-contained components such as, motor starters, power electronic converter
systems and equipment (PECS), switch mode power supplies (SMPS), uninterruptable power
supplies (UPS), basic drive modules (BDM), complete drive modules (CDM), adjustable speed
power drives systems (PDS), stand-alone energy storage systems (battery and capacitor
systems), and other electronic equipment which comply with their relevant product standards.
This document describes their integration into a PSC-assembly or an empty enclosure used
as a part of a PSC-assembly.
For some applications, such as, explosive atmospheres, functional safety, there may be a
need to comply with the requirements of other standards or legislation in addition to those
specified in the IEC 61439 series.
This document does not apply to the specific types of assemblies covered by other parts of
IEC 61439. For assemblies not covered by other parts, this part applies.
Unless local legislation details additional requirements, equipment within the scope of this
document, which complies with this document, is deemed to meet essential safety
requirements. This includes fully verified specifier options, for example user choice of
protection against accidental contact with hazardous live parts of IPXXB or IP3XD. Where
special requirements are agreed between the user and manufacturer, that are not fully
specified within this document, for example, (i) part of the assembly is outside the scope of
this document, (ii) exceptional vibration is present at the place of installation, (iii) exceptional
voltage variations occur in service, or (iv) possible adverse effects from sonic or ultrasonic
sources, a risk assessment and/or additional or more severe verifications may be required to
demonstrate that the essential safety requirements have been fulfilled.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day