SIST EN IEC 62368-1:2024/A11:2024

Audio/video, information and communication technology equipment - Part 1: Safety requirements

2022-02-21: This prAA covers common mods to prEN IEC 62368-1 - PR=74334

Einrichtungen für Audio/Video-, Informations- und Kommunikationstechnik – Teil 1: Sicherheitsanforderungen

Équipements des technologies de l'audio/vidéo, de l'information et de la communication - Partie 1: Exigences de sécurité

No scope available

Oprema za avdio/video, informacijsko in komunikacijsko tehnologijo - 1. del: Varnostne zahteve - Dopolnilo AA

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Apr-2022
• ICS: 33.160.01 - Audio, video and audiovisual systems in general
• ICS: 35.020 - Information technology (IT) in general
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 24-Apr-2024
• Due Date: 29-Jun-2024
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Mandate: M/452 - Standardisation mandate to CEN, CENELEC and ETSI in the field of Directives 1999/5/EC, 2006/95/EC and 2001/95/EC for health and safety aspects of personal music players and mobile phones with a music playing function
• Mandate: M/536 - [C(2015)536] Standardisation request as regards radio equipment in support of Directive 2014/53/EU
• Mandate: M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
• Ref Project: EN IEC 62368-1:2024/A11:2024 - Audio/video, information and communication technology equipment - Part 1: Safety requirements

Relations

• Amends: SIST EN IEC 62368-1:2024 - Audio/video, information and communication technology equipment - Part 1: Safety requirements
• Effective Date: 01-Mar-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 62368-1:2022/oprAA:2022
01-april-2022
Oprema za avdio/video, informacijsko in komunikacijsko tehnologijo - 1. del:
Varnostne zahteve - Dopolnilo AA
Audio/video, information and communication technology equipment - Part 1: Safety
requirements
Einrichtungen für Audio/Video-, Informations- und Kommunikationstechnik – Teil 1:
Sicherheitsanforderungen
Équipements des technologies de l'audio/vidéo, de l'information et de la communication -
Partie 1: Exigences de sécurité
Ta slovenski standard je istoveten z: prEN IEC 62368-1:2022/prAA:2022
ICS:
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
oSIST prEN IEC 62368- en,fr,de
1:2022/oprAA:2022
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 62368-1:2022/oprAA:2022

oSIST prEN IEC 62368-1:2022/oprAA:2022

EUROPEAN STANDARD DRAFT
prEN IEC 62368-1:2022
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
February 2022
ICS 33.160.01; 35.020
English Version
Audio/video, information and communication technology
equipment - Part 1: Safety requirements
Équipements des technologies de l'audio/vidéo, de Einrichtungen für Audio/Video-, Informations- und
l'information et de la communication - Partie 1: Exigences Kommunikationstechnik - Teil 1: Sicherheitsanforderungen
de sécurité
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 62368-1:2022; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2022-05-20.

It has been drawn up by CLC/TC 108X.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 75763 Ref. No. prEN IEC 62368-1:2022/prAA:2022 E

oSIST prEN IEC 62368-1:2022/oprAA:2022
prEN IEC 62368-1:2022/prAA:2022 (E)
1 Contents
2 European foreword . 3
3 1 Modification to the whole document . 4
4 2 Modification to Clause 1 . 4
5 3 Modification to Clause 4 . 4
6 4 Modification to 4.1.9 . 5
7 5 Modification to 5.4.9.1 . 5
8 6 Modification to 5.4.2.3.2.4 . 5
9 7 Modification to 5.6.6.2 . 5
10 8 Modification to 9.3.1 . 5
11 9 Modification to 10.2.1 . 5
12 10 Modification to 10.4.1 . 5
13 11 Modification to 10.4.4 . 6
14 12 Modification to 10.5.1 . 6
15 13 Modification to 10.5.3 . 6
16 14 Modification to Clause 10 . 7
17 15 Modification to G.3.1.2 . 12
18 16 Modification to G.7.1 . 12
19 17 Modification to M.2 . 12
20 18 Addition of annexes . 12
21 Annex ZA (normative) Normative references to international publications with their
22 corresponding European publications . 13
Annex ZB (normative) Special National Conditions . 32
24 Annex ZC (informative) A-deviations . 37
Annex ZD (informative) IEC and CENELEC code designations for flexible cords . 38
26 Annex ZZA (informative) Relationship between this European standard and the safety
27 objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be covered. 39
28 Annex ZZB (informative) Relationship between this European Standard and the essential
29 requirements of Directive 2014/53/EU [2014 OJ L153] aimed to be covered . 40
30 Annex ZZC  (informative) Relationship between this European Standard and the safety
requirements of Directive 2001/95/EC aimed to be covered . 41
32 19 Modification to Bibliography . 42
oSIST prEN IEC 62368-1:2022/oprAA:2022
prEN IEC 62368-1:2022/prAA:2022 (E)
34 European foreword
35 This document (prEN IEC 62368-1:2022/prAA:2022) has been prepared by CLC/TC 108X “Safety of
36 electronic equipment within the fields of Audio/Video, Information Technology and Communication
37 Technology”.
38 This document is currently submitted to the Enquiry.
39 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
40 This document is read in conjunction with prEN IEC 62368-1:2022.
41 This document has been prepared under a Standardization Request given to CENELEC by the European
42 Commission and the European Free Trade Association, and supports essential requirements of EU
43 Directive(s) / Regulation(s).
44 For relationship with EU Directive(s) / Regulation(s), see informative Annexes ZZA, ZZB and ZZC which
45 are integral parts of this document.
46 Clauses, subclauses, notes, tables, figures and annexes which are additional to those in
47 IEC 62368-1:202x are prefixed “Z”.
oSIST prEN IEC 62368-1:2022/oprAA:2022
prEN IEC 62368-1:2022/prAA:2022 (E)
48 1 Modification to the whole document
49 Delete all the “country” notes in the reference document according to the following list:
0.2.1 Note 1 and 1 Note 4 and 3.3.8.1 Note 2
Note 2 Note 5
3.3.8.3 Note 1 4.1.15 Note 4.7.3 Note 1 and
Note 2
5.4.2.3.2.2 Note c 5.4.2.3.2.4 Note 1 and 5.4.2.3.2.4 Note 2
Table 12 Note 3 Table 13
5.4.2.5 Note 2 5.4.5.1 Note 5.4.10.2.1 Note
5.4.10.2.2 Note 5.4.10.2.3 Note
5.5.2.1 Note 5.5.6 Note 5.6.4.2.1 Note 2 and
Note 3 and
Note 4
5.6.8 Note 2 5.7.7.1 Note 1 and 8.5.4.2.3 Note
Note 2
10.2.1 Note 3 and 10.5.3 Note 2 10.6.1 Note 3
Table 39 Note 4 and
Note 5
F.3.3.6 Note 3 Y.4.1 Note Y.4.5 Note
50 2 Modification to Clause 1
51 Add the following note at the end of the Clause 1:
52 NOTE Z1 The use of certain substances in electrical and electronic equipment is restricted within the EU: see
53 Directive 2011/65/EU.
54 Add the following paragraph and note after NOTE 5:
55 This document is a type test standard.
56 NOTE Z2 Routine tests of complete equipment, sub-assemblies or components are covered by EN 62911.
57 3 Modification to Clause 4
58 Add the following new subclause 4.Z1 after subclause 4.9:
59 For compliance with B.3 and B.4 in circuits connected to an AC mains, protective devices shall be
60 provided, subject to the following:
61 — for pluggable equipment type A, the protective devices shall be included as parts of the
62 equipment, with the exception of components in series with the mains input to the equipment such
63 as the supply cord, appliance coupler, r.f.i. filter and switch, for which the building installation shall be
64 regarded as providing protection in accordance with the rating of the wall socket outlet;
65 — for pluggable equipment type B or permanently connected equipment, the protection may be the
66 dedicated overcurrent and short-circuit protection in the building installation, provided that the means
67 of protection, for example a fuse or circuit breaker, is fully specified in the installation instructions.
oSIST prEN IEC 62368-1:2022/oprAA:2022
prEN IEC 62368-1:2022/prAA:2022 (E)
68 Where protective devices are required within the equipment, the protective devices within the equipment
69 shall operate before or at the same time the expected building installation protection will operate.
70 For earth faults in single-phase equipment, it is not necessary to provide 2 protective devices. It is
71 expected that the building installation will protect against earth faults. This applies also in countries where
72 an IT power distribution system is used.
73 4 Modification to 4.1.9
74 Add the following paragraph to the end of this subclause:
75 Products shall comply with the requirements of this document with appropriate measurement uncertainty.
76 NOTE Z1 See also the RED Adco position on ‘Measurement uncertainty in published harmonized standards’.
77 5 Modification to 5.4.9.1
78 Add the following note after the 5th paragraph:
79 NOTE Z1 For guidance on the use of high voltage source, see EN 60060-1, Clause 8 of EN 60243-1 and EN 61180.
80 6 Modification to 5.4.2.3.2.4
81 Add the following to the end of this subclause:
82 The requirement for interconnection with external circuit in a HBES/BACS network is in addition given in
83 EN IEC 63044-3:2018.
84 7 Modification to 5.6.6.2
85 Replace item d) with the following:
86 d) For equipment powered from a DC mains, if the protective current rating of the circuit under test
87 exceeds 25 A, the test current shall be minimum as required in item a), unless the manufacturer specifies
88 a higher value.
89 8 Modification to 9.3.1
90 Replace the second paragraph with the following:
91 An accessible part that, while in contact with the body, is likely to drop in temperature upon touch can be
92 evaluated under the limits of Annex A in IEC Guide 117:2010 using the test method of 4.5 of IEC Guide
93 117.
94 9 Modification to 10.2.1
c) d)
95 Add the following to and in Table 38:
96 For additional requirements, see 10.5.1.
97 10 Modification to 10.4.1
98 Replace the second paragraph of 10.4.1 with:
99 Electronic light effect equipment does not have to comply with the requirements of 10.4. However, IEC
100 TR 62471-2 shall be considered and proper installation instructions shall be provided.
oSIST prEN IEC 62368-1:2022/oprAA:2022
prEN IEC 62368-1:2022/prAA:2022 (E)
101 Replace the ninth paragraph of 10.4.1 with:
102 The following information shall be provided in the user manual for safe operation and installation. This
103 information shall also be provided for safe operation by a skilled person who may be exposed to Risk
104 Group 3 energy levels.
105 — Adequate instructions for proper assembly, installation, maintenance and safe use, including clear
106 warnings concerning precautions to avoid possible exposure to hazardous optical radiation; and
107 — Advice on safe operating procedures and warnings concerning reasonably foreseeable misuse,
108 malfunctions and hazardous failure modes. Where servicing and maintenance procedures are
109 detailed, they shall include explicit instructions on safe procedures to be followed; and
110 — The marking on the equipment shall be reproduced in the user manual. A yellow background is not
111 required in the user manual.
112 11 Modification to 10.4.4
113 Replace the last paragraph of 10.4.4 with:
114 Compliance against material degradation from UV radiation is checked by the applicable tests of
115 Annex C.
116 12 Modification to 10.5.1
117 Add the following after the first paragraph:
118 For RS1 compliance is checked by measurement under the following conditions:
...