SIST EN 12767:2019+A1:2025
(Main)Passive safety of support structures for road equipment - Requirements and test methods
Passive safety of support structures for road equipment - Requirements and test methods
This document specifies performance test procedures to determine the passive safety properties of support structures such as lighting columns, sign posts, signal supports, structural elements, foundations, detachable products and any other components used to support a particular item of equipment on the roadside.
This document provides a common basis for the vehicle impact testing of items of road equipment support structures.
This document does not apply to road restraint systems.
Passive Sicherheit von Tragkonstruktionen für die Straßenausstattung - Anforderungen und Prüfverfahren
Dieses Dokument legt Leistungsprüfverfahren für die Bestimmung passiver Sicherheitseigenschaften von Tragkonstruktionen, wie z. B. Lichtmaste, Wegweiser, Lichtsignalanlagen, Konstruktionselemente, Fundamente, abnehmbare Produkte und alle anderen Komponenten, die zum Tragen eines bestimmten Ausstattungsgegenstandes am Straßenrand verwendet werden, fest.
Dieses Dokument stellt eine gemeinsame Grundlage für die Fahrzeuganprallprüfungen von Tragkonstruktionen für die Straßenausstattung bereit.
Dieses Dokument gilt nicht für Rückhaltesysteme an Straßen.
Sécurité passive des structures supports d'équipements de la route - Prescriptions et méthodes d'essai
Le présent document spécifie les procédures d’essai de performance servant à déterminer les caractéristiques de sécurité passive des structures supports, telles que les candélabres d’éclairage public, les panneaux de signalisation, les supports de feux de signalisation, les éléments structurels, les fondations, les produits détachables et tout autre composant servant à supporter un équipement particulier installé sur le bord de la route.
Le présent document fournit une base commune pour les essais de choc de véhicules avec des structures supports d’équipements de la route.
Le présent document ne s’applique pas aux dispositifs de retenue routiers.
Pasivna varnost nosilnih konstrukcij za opremo cest - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2025
Pasivna varnost nosilnih konstrukcij za opremo cest - Zahteve in preskusne
metode
Passive safety of support structures for road equipment - Requirements and test
methods
Passive Sicherheit von Tragkonstruktionen für die Straßenausstattung - Anforderungen
und Prüfverfahren
Sécurité passive des structures supports d'équipements de la route - Prescriptions et
méthodes d'essai
Ta slovenski standard je istoveten z: EN 12767:2019+A1:2024
ICS:
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 12767:2019+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 93.080.30 Supersedes EN 12767:2019
English Version
Passive safety of support structures for road equipment -
Requirements and test methods
Sécurité passive des structures supports Passive Sicherheit von Tragkonstruktionen für die
d'équipements de la route - Prescriptions et méthodes Straßenausstattung - Anforderungen und
d'essai Prüfverfahren
This European Standard was approved by CEN on 24 June 2019 and includes Amendment 1 approved by CEN on 24 August 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12767:2019+A1:2024 E
worldwide for CEN national Members.
Contents
European foreword . 4
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and abbreviations . 10
5 General test parameters . 11
5.1 Test site . 11
5.2 Backfill . 11
5.3 Test vehicle . 12
6 General test item parameters . 13
6.1 General test item documentation . 13
6.2 Test item selection . 13
7 Test method . 15
7.1 General . 15
7.2 Impact angle . 15
7.3 Impact point . 15
7.4 Impact speed . 21
7.5 Simplified test method for non-harmful support structures . 21
8 Impact data measurement . 22
8.1 General . 22
8.2 Impact data to be recorded. 22
8.3 Test item behaviour . 23
8.4 Vehicle behaviour . 24
8.5 Impact severity indexes . 24
8.6 Photographic coverage . 24
9 Test report . 25
9.1 General . 25
9.2 Test data decimal rounding . 25
Annex A (normative) Data evaluation . 27
Annex B (normative) Backfill requirements . 32
Annex C (informative) Push/pull test . 35
Annex D (normative) Vehicle data . 36
Annex E (normative) Vehicle calibration . 38
Annex F (informative) Bogie vehicle . 40
Annex G (normative) !Product ranges" . 41
Annex H (normative) Changed versions . 44
Annex I (normative) Determining the speed and mass of the falling support . 45
Annex J (informative) Test report . 46
Annex K (normative) Deemed to comply . 52
Annex L (normative) Use of test results performed in accordance with previous versions of
EN 12767 . 53
Annex M (normative) !Virtual testing" . 55
Bibliography . 69
European foreword
This document (EN 12767:2019+A1:2024) has been prepared by Technical Committee CEN/TC 226
“Road Equipment”, the secretariat of which is held by AFNOR.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by June 2025, and conflicting national standards shall be withdrawn at
the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document includes Amendment 1 approved by CEN on 24 August 2024.
This document supersedes !EN 12767:2019".
The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
! The significant technical changes incorporated in this revision are:
— incorporation of the Regulation (EU) No 305/2011 of the European Parliament and of the Council of
9 March 2011 laying down harmonized conditions for the marketing of construction products and
repealing Council Directive 89/106/EEC terminology;
— introduction of a push-pull test to enable a comparison to be made between the backfills used in the
test and those on-site;
— harmonization of the boundary values for occupant safety (ASI and THIV) independent of the energy
absorption category;
— replacement of the occupant safety level by an alphanumeric character instead of a number to make
a clear distinction with the old (EN 12767:2007) approach. Now, NE-C, LE-C and HE-C have the same
occupant safety. The best occupant safety is achieved for A;
— introduction of collapse modes to classify if test items become detached or do not become detached;
— introduction of direction sensitivities to take into account any sensitiveness to impact angle;
— improved test description, include installation manual and translation of roof deformation into a
measurable value, to reduce the influence of the vehicle structure on the test results;
— introduction of an extra test at 50 km/h for cases where the test-item is not activated at low speed.
An explanation of the definition of “activated” is also given;
— better rules for the determination of product ranges (former product families) based on the tested
limit(s);
— introduction of a risk assessment approach, in line with the EN 1317-1:2010, for assessing changes
of a version, and the use of (for example) virtual testing in this;
— possibility to declare, under certain conditions, intermediate speed levels."
Most of the comments collected from all CEN members to the previous version of this norm are
implemented or solved. The definition and use of newer technologies has to be developed before
introduction into the standard.
!Some added changes mentioned above are expressed in a new performance classification for the
product. This results in a longer description of the overall passive safety performance, but at the end, it
gives a clearer indication of product performance. For example, an old performance classification like
“100, HE, 3” could be translated to “100-HE-C-S-SE-MD-1”. In this example, the last 4 sub-indications
stands for backfill type (S), collapse mode (SE), direction sensitivity (MD) and risk of roof indentation
(1)."
Translation of older tests to this new standard is possible when sufficient information is available in the
reports, photographs and videos of the tests.
The previous version of EN 12767 included test acceptance criteria – this is now, for convenience,
repeated in Annex A.
When this standard is used as a supporting standard for a product standard under CPR (e.g. sign
supports) relevant clauses of Annexes A, G and H are supposed to be copied inside the product standard,
and the product standard refers to the rest of this standard.
When this standard is used for testing constructions with no product standard the specifying authority is
supposed to refer to whole EN 12767, including Annexes A, G and H.
Annexes A, B, D, E, G, H, I, K, L, M of this document are normative, Annexes C, F, J are informative.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, N
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.