kSIST FprEN ISO 28721-2:2024

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock (ISO/FDIS 28721‑2:2024)

ISO 28721-2:2015 specifies requirements for the resistance to chemical attack and thermal shock of chemical enamels and their designation for ordering purposes.
It is applicable to enamelled apparatus, piping and other components primarily used for process equipment in chemical plants.
It only applies to unalloyed and low-alloy carbon steels suitable for enamelling.
NOTE          The main criteria for assessing enamel quality are the resistance to chemical attack and thermal shock and the structure of the cover coat enamel.

Emails und Emaillierungen - Emaillierte Apparate für verfahrenstechnische Anlagen - Teil 2: Bezeichnung und Festlegung der chemischen und Temperaturschockbeständigkeit (ISO/FDIS 28721‑2:2024)

Émaux vitrifiés - Appareils émaillés pour les installations industrielles - Partie 2: Désignation et spécifications de la résistance à l'attaque chimique et au choc thermique (ISO/FDIS 28721‑2:2024)

ISO 28721-2:2015 spécifie les exigences relatives à la résistance à l'attaque chimique et au choc thermique des émaux chimiques et leur désignation pour répondre à la commande.
Elle est applicable aux appareils, éléments de tuyauterie et autres composants émaillés, principalement utilisés pour l'équipement industriel dans les usines chimiques.
Elle s'applique uniquement aux aciers au carbone faiblement alliés et non alliés, convenant à l'émaillage.
NOTE          Les principaux critères pour évaluer la qualité de l'émail sont la résistance à l'attaque chimique et au choc thermique, ainsi que la structure du revêtement émaillé.

Steklasti in keramični emajli - Emajlirane naprave za procesno opremo - 2. del: Označevanje in specifikacija odpornosti proti kemični agresiji in toplotnemu udaru (ISO/FDIS 28721‑2:2024)

General Information

• Status: Not Published
• Public Enquiry End Date: 28-Dec-2023
• ICS: 25.220.50 - Enamels
• Technical Committee: IPKZ - Protection of metals against corrosion
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 14-Nov-2024
• Due Date: 02-Jan-2025
• Ref Project: FprEN ISO 28721-2 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock (ISO/FDIS 28721-2:2024)

Relations

• Revises: SIST EN ISO 28721-2:2016 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock (ISO 28721-2:2015)
• Effective Date: 17-May-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 28721-2:2023
01-december-2023
Steklasti in keramični emajli - Emajlirane naprave za procesno opremo - 2. del:
Označevanje in specifikacija odpornosti proti kemični agresiji in toplotnemu udaru
(ISO/DIS 28721-2:2023)
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2:
Designation and specification of resistance to chemical attack and thermal shock
(ISO/DIS 28721-2:2023)
Emails und Emaillierungen - Emaillierte Apparate für verfahrenstechnische Anlagen -
Teil 2: Bezeichnung und Festlegung der chemischen und
Temperaturschockbeständigkeit (ISO/DIS 28721-2:2023)
Émaux vitrifiés - Appareils émaillés pour les installations industrielles - Partie 2:
Désignation et spécifications de la résistance à l'attaque chimique et au choc thermique
(ISO/DIS 28721-2:2023)
Ta slovenski standard je istoveten z: prEN ISO 28721-2
ICS:
25.220.50 Emajlne prevleke Enamels
oSIST prEN ISO 28721-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 28721-2:2023
oSIST prEN ISO 28721-2:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 28721-2
ISO/TC 107 Secretariat: KATS
Voting begins on: Voting terminates on:
2023-10-17 2024-01-09
Vitreous and porcelain enamels — Glass-lined apparatus
for process plants —
Part 2:
Designation and specification of resistance to chemical
attack and thermal shock
Émaux vitrifiés — Appareils émaillés pour les installations industrielles —
Partie 2: Désignation et spécifications de la résistance à l'attaque chimique et au choc thermique
ICS: 25.220.50
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 28721-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

oSIST prEN ISO 28721-2:2023
ISO/DIS 28721-2:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 28721-2
ISO/TC 107 Secretariat: KATS
Voting begins on: Voting terminates on:

Vitreous and porcelain enamels — Glass-lined apparatus
for process plants —
Part 2:
Designation and specification of resistance to chemical
attack and thermal shock
Émaux vitrifiés — Appareils émaillés pour les installations industrielles —
Partie 2: Désignation et spécifications de la résistance à l'attaque chimique et au choc thermique
ICS: 25.220.50
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 28721-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

oSIST prEN ISO 28721-2:2023
ISO/DIS 28721-2:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Designation . 1
4 Quality requirements .2
4.1 Rate of corrosion in hydrochloric acid . 2
4.2 Rate of corrosion in sodium hydroxide solution . 2
3 2
4.3 The volume surface ratio shall be 20 cm :1 cm according to ISO 28706-4 Crack
formation temperature . 2
Bibliography . 3
iii
oSIST prEN ISO 28721-2:2023
ISO/DIS 28721-2:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particul
...