SIST EN 12697-43:2014
(Main)Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
EN 12697-43 specifies a test method to determine the resistance of a bituminous mixture or pavement to fuels. The procedure involves initial soaking of a test specimen made in the laboratory or cored from a pavement in a fuel, followed by a brushing period with a brush test device. The material loss of the specimen is a measure of the resistance to that fuel for that bituminous mixture.
Asphalt - Prüfverfahren für Heißasphalt - Teil 43: Treibstoffbeständigkeit
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Treibstoffbeständigkeit von Asphaltmischgütern oder Fahrbahnbefestigungen aus Asphalt fest. Dieses Verfahren besteht darin, einen im Labor hergestellten oder durch Kernbohren aus einer Fahrbahnbefestigung entnommenen Probekörper zunächst in Treibstoff zu lagern und ihn dann in einem Bürstenprüfgerät zu bürsten. Der Materialverlust des Probekörpers ist ein Maß für die Beständigkeit des betreffenden Asphalts gegenüber dem betreffenden Treibstoff.
Mélanges bitumineux - Essais pour enrobés à chaud - Partie 43: Résistance aux carburants
La présente Norme européenne spécifie une méthode d’essai destinée à déterminer la résistance aux carburants d’un mélange bitumineux ou d’une chaussée bitumineuse. Le mode opératoire implique tout d’abord l’immersion dans un carburant d’une éprouvette préparée en laboratoire ou extraite de la chaussée, suivie d’une phase de brossage au moyen d’une brosse en montée sur un dispositif d'essai de brossage. La perte de matériau de l’éprouvette permet de mesurer la résistance du mélange bitumineux à ce carburant.
Bitumenske zmesi - Preskusne metode za vroče asfaltne zmesi - 43. del: Odpornost proti gorivu
Standard EN 12697-43 določa preskusno metodo za ugotavljanje odpornosti bitumenske zmesi ali voziščne konstrukcije proti gorivom. Postopek vključuje začetno namakanje preskušanca v gorivu, pri čemer je preskušanec izdelan v laboratoriju ali izvrtan iz voziščne konstrukcije, čemur sledi obdobje premazovanja s preskusno napravo za premazovanje. Izguba materiala preskušanca je merilo odpornosti proti posameznemu gorivu za določeno bitumensko zmes.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Asphalt - Prüfverfahren für Heißasphalt - Teil 43: TreibstoffbeständigkeitMélanges bitumineux - Essais pour enrobés à chaud - Partie 43: Résistance aux carburantsBituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-43:2014SIST EN 12697-43:2014en01-oktober-2014SIST EN 12697-43:2014SLOVENSKI
STANDARDSIST EN 12697-43:20051DGRPHãþD
SIST EN 12697-43:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-43
June 2014 ICS 93.080.20 Supersedes EN 12697-43:2005English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
Mélanges bitumineux - Méthodes d' essais pour mélange hydrocarboné à chaud - Partie 43: Résistance aux carburants
Asphalt - Prüfverfahren für Heißasphalt - Teil 43: Treibstoffbeständigkeit This European Standard was approved by CEN on 14 May 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-43:2014 ESIST EN 12697-43:2014
EN 12697-43:2014 (E) 2 Contents
Page Foreword .3 1 Scope .7 2 Normative references .7 3 Terms and definitions .7 4 Principle .7 5 Apparatus .8 6 Fuels . 11 7 Preparation of test specimens . 11 8 Procedure . 12 8.1 Soaking in fuel and removing the fuel . 12 8.1.1 Preparation for testing and immersion . 12 8.1.2 Cleaning the specimen . 12 8.1.3 Loss of mass due to immersion . 12 8.2 The brush test . 13 8.2.1 General . 13 8.2.2 Brush test for a porous asphalt specimen using a laboratory mixer . 13 8.2.3 Brush test for a non-porous asphalt specimen using a laboratory mixer . 13 8.2.4 Brush test for porous asphalt specimen using an adapted milling machine . 13 8.2.5 Brush test for a non-porous asphalt specimen using an adapted milling machine . 14 8.3 Calculation and expression of results . 14 9 Test report . 15 10 Precision . 15
SIST EN 12697-43:2014
EN 12697-43:2014 (E) 3 Foreword This document (EN 12697-43:2014) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2014, and conflicting national standards shall be withdrawn at the latest by December 2014. This document supersedes EN 12697-43:2005. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. In comparison with EN 12697-43:2005, the following significant changes were made: a) the note that jet fuel is usually used is removed; b) the principle is revised and clarified; c) the oven is replaced with a conditioning chamber; d) the use of the glass rod is clarified; e) a roller compactor is included as a third alternative for compaction; f) two alternative brush test devices are included instead of just the mixer; g) wear on the brush and the rotation speed of the brush are redefined; h) storage time for samples is revised compared to that used for other tests in the series; i) the depth of fuel during soaking is revised; j) the change in storage time for specimen with polymer-modified bitumen is removed; k) cleaning of specimens after soaking tightened up; l) combined parameter added to measure overall performance; m) the categories for good, moderate and poor resistance are removed; n) the estimated precision is removed. This document is one of a series of standards as listed below: EN 12697-1, Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content EN 12697-2, Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size distribution EN 12697-3, Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Bitumen recovery: Rotary evaporator SIST EN 12697-43:2014
EN 12697-43:2014 (E) 4 EN 12697-4, Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Bitumen recovery: Fractionating column EN 12697-5, Bituminous mixtures — Test methods for hot mix asphalt — Part 5: Determination of the maximum density EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density of bituminous specimens EN 12697-7, Bituminous mixtures — Test methods for hot mix asphalt — Part 7: Determination of bulk density of bituminous specimens by gamma rays EN 12697-8, Bituminous mixtures — Test methods for hot mix asphalt — Part 8: Determination of void characteristics of bituminous specimens EN 12697-10, Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactability EN 12697-11, Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of the affinity between aggregate and bitumen EN 12697-12, Bituminous mixtures — Test methods for hot mix asphalt — Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature measurement EN 12697-14, Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content EN 12697-15, Bituminous mixtures — Test methods for hot mix asphalt — Part 15: Determination of the segregation sensitivity EN 12697-16, Bituminous mixtures — Test methods for hot mix asphalt — Part 16: Abrasion by studded tyres EN 12697-17, Bituminous mixtures — Test methods for hot mix asphalt — Part 17: Particle loss of porous asphalt specimen EN 12697-18, Bituminous mixtures — Test methods for hot mix asphalt — Part 18: Binder drainage EN 12697-19, Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of specimen EN 12697-20, Bituminous mixtures — Test methods for hot mix asphalt — Part 20: Indentation using cube or cylindrical specimens (CY) EN 12697-21, Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using plate specimens EN 12697-22, Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking EN 12697-23, Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the indirect tensile strength of bituminous specimens EN 12697-24, Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue EN 12697-25, Bituminous mixtures — Test methods for hot mix asphalt — Part 25: Cyclic compression test EN 12697-26, Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness SIST EN 12697-43:2014
EN 12697-43:2014 (E) 5 EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling EN 12697-28, Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples for determining binder content, water content and grading EN 12697-29, Bituminous mixtures — Test method for hot mix asphalt — Part 29: Determination of the dimensions of a bituminous specimen EN 12697-30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30: Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor EN 12697-33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen prepared by roller compactor EN 12697-34, Bituminous mixtures — Test methods for hot mix asphalt — Part 34: Marshall test EN 12697-35, Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing EN 12697-36, Bituminous mixtures — Test methods for hot mix asphalt — Part 36: Determination of the thickness of a bituminous pavement EN 12697-37, Bituminous mixtures — Test methods for hot mix asphalt — Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA EN 12697-38, Bituminous mixtures — Test methods for hot mix asphalt — Part 38: Common equipment and calibration EN 12697-39, Bituminous mixtures — Test methods for hot mix asphalt — Part 39: Binder content by ignition EN 12697-40, Bituminous mixtures — Test methods for hot mix asphalt — Part 40: In situ drainability EN 12697-41, Bituminous mixtures — Test methods for hot mix asphalt — Part 41: Resistance to de-icing fluids EN 12697-42, Bituminous mixtures — Test methods for hot mix asphalt — Part 42: Amount of foreign matter in reclaimed asphalt EN 12697-43, Bituminous mixtures — Test methods for hot mix asphalt — Part 43: Resistance to fuel EN 12697-44, Bituminous mixtures — Test methods for hot mix asphalt — Part 44: Crack propagation by semi-circular bending test EN 12697-45, Bituminous mixtures — Test methods for hot mix asphalt — Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test EN 12697-46, Bituminous mixtures — Test methods for hot mix asphalt — Part 46: Low temperature cracking and properties by uniaxial tension tests EN 12697-47, Bituminous mixtures — Test methods for hot mix asphalt — Part 47: Determination of the ash content of natural asphalts SIST EN 12697-43:2014
EN 12697-43:2014 (E) 6 prEN 12697-48, Bituminous mixtures — Test methods for hot mix asphalt — Part 48: Interlayer Bonding1) EN 12697-49, Bituminous mixtures — Test methods for hot mix asphalt — Part 49: Determination of friction after polishing prCEN/TS 12697-50, Bituminous mixtures — Test methods for hot mix asphalt — Part 50: Resistance to scuffing1) According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
1) In preparation. SIST EN 12697-43:2014
EN 12697-43:2014 (E) 7 1 Scope This European Standard specifies a test method to determine the resistance of a bituminous mixture or pavement to fuels. The procedure involves initial soaking of a test specimen made in the laboratory or cored from a pavement in a fuel, followed by a brushing period with a brush test device. The material loss of the specimen is a measure of the resistance to that fuel for that bituminous mixture. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density of bituminous specimens EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling EN 12697-30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30: Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation by gyratory compactor EN 12697-33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen prepared by roller compactor EN 12697-35, Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing EN 13108-20:2006, Bituminous mixtures — Material specifications — Part 20: Type Testing 3 Terms and definitions For the purposes of this document, the following term and definition applies. 3.1 fuels liquid (petroleum product) that might be spilled accidentally or sprayed deliberately onto an asphalt pavement and can cause damage to the asphalt mixture 4 Principle A cylindrical test specimen with a known mass is immersed partly in a bath with the specified fuel for a specified period of time. After removal from the bath, cleaning with water and drying for 24 h at 25 °C, the loss of mass of the specimen is measured and the immersed surface is visually inspected. Then an abrasive loading is applied onto the immersed surface of the test specimen by a steel brush mounted onto a brush test device. The steel brush moves
...
SLOVENSKI STANDARD
oSIST prEN 12697-43:2012
01-december-2012
%LWXPHQVNH]PHVL3UHVNXVQHPHWRGH]DYURþHDVIDOWQH]PHVLGHO
2GSRUQRVWSURWLJRULYX
Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
Asphalt - Prüfverfahren für Heißasphalt - Teil 43: Treibstoffbeständigkeit
Mélanges bitumineux - Essais pour enrobés à chaud - Partie 43: Résistance aux
carburants
Ta slovenski standard je istoveten z: prEN 12697-43
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 12697-43:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12697-43:2012
---------------------- Page: 2 ----------------------
oSIST prEN 12697-43:2012
EUROPEAN STANDARD
DRAFT
prEN 12697-43
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2012
ICS 93.080.20 Will supersede EN 12697-43:2005
English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part
43: Resistance to fuel
Mélanges bitumineux - Essais pour enrobés à chaud - Asphalt - Prüfverfahren für Heißasphalt - Teil 43:
Partie 43: Résistance aux carburants Treibstoffbeständigkeit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 227.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12697-43:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12697-43:2012
prEN 12697-43:2012 (E)
Contents Page
Foreword .3
1 Scope .7
2 Normative references .7
3 Terms and definitions .7
4 Principle .7
5 Equipment .8
5.1 Beaker with glass rod .8
5.2 Glass funnel .8
5.3 Balance .8
5.4 Conditioning chamber .8
5.5 Impact hammer, gyrator or roller compactor .8
5.6 Brush test devices .8
5.6.1 Test device based on a laboratory mixer .8
5.6.2 Test device based on a milling machine .9
5.7 Steel brush . 10
6 Fuels . 11
7 Preparation of test specimens . 11
8 Procedure . 11
8.1 Soaking in fuel and removing the fuel . 11
8.1.1 Preparation for testing and immersion . 11
8.1.2 Cleaning the specimen . 12
8.1.3 Loss of mass due to immersion . 12
8.2 Brush test . 12
8.2.1 General . 12
8.2.2 Brush test for a porous asphalt specimen using a laboratory mixer . 12
8.2.3 Brush test for a non-porous asphalt specimen using a laboratory mixer . 13
8.2.4 Brush test for porous asphalt specimen using an adapted milling machine . 13
8.2.5 Brush test for a non-porous asphalt specimen using an adapted milling machine . 13
8.3 Calculation and expression of results . 13
9 Test report . 14
10 Precision . 14
2
---------------------- Page: 4 ----------------------
oSIST prEN 12697-43:2012
prEN 12697-43:2012 (E)
Foreword
This document (prEN 12697-43:2012) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12697-43:2005.
The significant changes from that document are
a) the note that jet fuel is usually used is removed,
b) the principle is revised and clarified,
c) the oven is replaced with a conditioning chamber,
d) the use of the glass rod is clarified,
e) roller compactor included as third alternative for compaction,
f) two alternative brush test devices instead of just the mixer,
g) wear on the brush and the rotation speed of the brush are redefined,
h) storage time for samples revised to that used for other tests in the series,
i) the depth of fuel during soaking is revised,
j) the change in storage time for specimen with polymer-modified bitumen is removed,
k) cleaning of specimens after soaking tightened up,
l) combined parameter added to measure overall performance,
m) the categories for good, moderate and poor resistance are removed,
n) the estimated precision is removed.
This document is one of a series of standards as listed below:
— EN 12697-1, Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content;
— EN 12697-2, Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle
size distribution;
— EN 12697-3, Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Bitumen recovery:
Rotary evaporator;
— EN 12697-4, Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Bitumen recovery:
Fractionating column;
3
---------------------- Page: 5 ----------------------
oSIST prEN 12697-43:2012
prEN 12697-43:2012 (E)
— EN 12697-5, Bituminous mixtures — Test methods for hot mix asphalt — Part 5: Determination of the
maximum density;
— EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk
density of bituminous specimens;
— EN 12697-7, Bituminous mixtures — Test methods for hot mix asphalt — Part 7: Determination of bulk
density of bituminous specimens by gamma rays;
— EN 12697-8, Bituminous mixtures — Test methods for hot mix asphalt — Part 8: Determination of void
characteristics of bituminous specimens;
— EN 12697-10, Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactibility;
— EN 12697-11, Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of the
affinity between aggregates and bitumen;
— EN 12697-12, Bituminous mixtures — Test methods for hot mix asphalt — Part 12: Determination of the
water sensitivity of bituminous specimens;
— EN 12697-13, Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature
measurement;
— EN 12697-14, Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content;
— EN 12697-15, Bituminous mixtures — Test methods for hot mix asphalt — Part 15: Determination of the
segregation sensitivity;
— EN 12697-16, Bituminous mixtures — Test methods for hot mix asphalt — Part 16: Abrasion by studded
tyres;
— EN 12697-17, Bituminous mixtures — Test methods for hot mix asphalt — Part 17: Particle loss of porous
asphalt specimen;
— EN 12697-18, Bituminous mixtures — Test methods for hot mix asphalt — Part 18: Binder drainage;
— EN 12697-19, Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of
specimen;
— EN 12697-20, Bituminous mixtures — Test methods for hot mix asphalt — Part 20: Indentation using cube
or cylindrical specimens (CY);
— EN 12697-21, Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using plate
specimens;
— EN 12697-22, Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking;
— EN 12697-23, Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the
indirect tensile strength of bituminous specimens;
— EN 12697-24, Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue;
— EN 12697-25, Bituminous mixtures — Test methods for hot mix asphalt — Part 25: Cyclic compression
test;
— EN 12697-26, Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness;
— EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling;
4
---------------------- Page: 6 ----------------------
oSIST prEN 12697-43:2012
prEN 12697-43:2012 (E)
— EN 12697-28, Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of
samples for determining binder content, water content and grading;
— EN 12697-29, Bituminous mixtures — Test methods for hot mix asphalt — Part 29: Determination of the
dimensions of a bituminous specimen;
— EN 12697-30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30: Specimen preparation
by impact compactor;
— EN 12697-31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation
by gyratory compactor;
— EN 12697-32, Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory
compaction of bituminous mixtures by vibratory compactor;
— EN 12697-33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen prepared by
roller compactor;
— EN 12697-34, Bituminous mixtures — Test methods for hot mix asphalt — Part 34: Marshall test;
— EN 12697-35, Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing;
— EN 12697-36, Bituminous mixtures — Test methods for hot mix asphalt — Part 36: Determination of the
thickness of a bituminous pavement;
— EN 12697-37, Bituminous mixtures — Test methods for hot mix asphalt — Part 37: Hot sand test for the
adhesivity of binder on precoated chippings for HRA;
— EN 12697-38, Bituminous mixtures — Test methods for hot mix asphalt — Part 38: Common equipment
and calibration;
— EN 12697-39, Bituminous mixtures — Test methods for hot mix asphalt — Part 39: Binder content by
ignition;
— EN 12697-40, Bituminous mixtures — Test methods for hot mix asphalt — Part 40: In situ drainability;
— EN 12697-41, Bituminous mixtures — Test methods for hot mix asphalt — Part 41: Resistance to de-icing
fluids;
— EN 12697-42, Bituminous mixtures — Test methods for hot mix asphalt — Part 42: Amount of foreign
matter in reclaimed asphalt;
— EN 12697-43, Bituminous mixtures — Test methods for hot mix asphalt — Part 43: Resistance to fuel;
— EN 12397-44, Bituminous mixtures — Test methods for hot mix asphalt — Part 44: Crack propagation by
semi-circular bending test;
— EN 12397-45, Bituminous mixtures — Test methods for hot mix asphalt — Part 45: Saturation Ageing
Tensile Stiffness (SATS) Conditioning test;
— EN 12397-46, Bituminous mixtures — Test methods for hot mix asphalt — Part 46: Low temperature
cracking and properties by uniaxial tension tests;
— EN 12397-47, Bituminous mixtures — Test methods for hot mix asphalt — Part 47: Determination of the
ash content of natural asphalts;
5
---------------------- Page: 7 ----------------------
oSIST prEN 12697-43:2012
prEN 12697-43:2012 (E)
— prEN 12697-48, Bituminous mixtures — Test methods for hot mix asphalt — Part 48: Interlayer bond
1)
strength ;
— prEN 12697-49, Bituminous mixtures — Test methods for hot mix asphalt — Part 49: Determination of
1)
friction after polishing ;
— prEN 12697-50, Bituminous mixtures — Test methods for hot mix asphalt — Part 50: Scuffing resistance
1)
of surface course asphalt .
1) In preparation.
6
---------------------- Page: 8 ----------------------
oSIST prEN 12697-43:2012
prEN 12697-43:2012 (E)
1 Scope
This European Standard specifies a test method to determine the resistance of a bituminous mixture or
pavement to fuels. The procedure involves initial soaking of a test specimen made in the laboratory or cored
from a pavement in a fuel, followed by a brushing period with a brush test device. The material loss of the
specimen is a measure of the resistance to that fuel for that bituminous mixture.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density
of bituminous specimens
EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling
EN 12697-30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30: Specimen preparation by
impact compactor
EN 12697-31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation by
gyratory compactor
EN 12697-33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen prepared by
roller compactor
EN 12697-35, Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing
EN 13108-20:2006, Bituminous mixtures — Material specifications — Part 20: Type Testing
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
fuels
liquid (petroleum product) that might be spilled accidentally or sprayed deliberately onto an asphalt pavement
and can cause damage to the asphalt mixture
3.2
laboratory mixer
mixer as described in EN 12697-35 capable of epicyclical motions
4 Principl
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.