SIST-TS CEN/TS 15022-4:2007

Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS)

This Technical Specification specifies a flame atomic absorption spectrometric method (FAAS) for the determination of the tin content of copper and copper alloys in the form of unwrought, wrought and cast products.
The method is applicable to products having medium tin mass fractions between 0,2 % and 3 %.

Kupfer und Kupferlegierungen - Bestimmung des Zinngehaltes - Teil 4: Mittlerer Zinngehalt - Flammenatomabsorptionsspektrometrisches Verfahren (FAAS)

Diese Europäische Technische Spezifikation legt ein flammenatomabsorptionsspektrometrisches Verfahren (FAAS) für die Bestimmung des Zinngehaltes in Kupfer und Kupferlegierungen fest, die als Gussstücke oder als plastisch oder nicht plastisch geformte Produkte vorliegen.
Das Verfahren ist geeignet für Produkte mit Zinn-Massenanteilen zwischen 0,2 % und 2,5 %.

Cuivre et alliages de cuivre - Dosage de l'etain - Partie 4 : Etain en moyenne teneur - Méthode par spectrométrie d'absorption atomique dans la flamme (SAAF)

La présente Spécification Technique présente une méthode par spectrométrie d’absorption atomique dans la flamme (SAAF) pour le dosage de l’étain dans le cuivre et les alliages de cuivre, sous forme de produits non corroyés, corroyés et moulés.
Cette méthode est applicable aux produits ayant de moyennes teneurs (fractions massiques) en étain comprises entre 0,2 % et 3 %.

Baker in bakrove zlitine - Določevanje kositra - 4. del: Srednja količina kositra - Metoda s plamensko atomsko absorpcijsko spektrometrijo (FAAS)

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2007
• Withdrawal Date: 10-Nov-2011
• ICS: 77.120.30 - Copper and copper alloys
• Technical Committee: INEK - Nonferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 11-Nov-2011
• Due Date: 04-Dec-2011
• Completion Date: 11-Nov-2011
• Ref Project: CEN/TS 15022-4:2006 - Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS)

Relations

• Replaced By: SIST EN 15022-4:2012 - Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
• Effective Date: 01-Jan-2012
• Replaced By: SIST EN 15022-4:2012 - Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15022-4:2007
01-februar-2007
%DNHULQEDNURYH]OLWLQH'RORþHYDQMHNRVLWUDGHO6UHGQMDNROLþLQDNRVLWUD
0HWRGDVSODPHQVNRDWRPVNRDEVRUSFLMVNRVSHNWURPHWULMR)$$6
Copper and copper alloys - Determination of tin content - Part 4: Medium tin content -
Flame atomic absorption spectrometry method (FAAS)
Kupfer und Kupferlegierungen - Bestimmung des Zinngehaltes - Teil 4: Mittlerer
Zinngehalt - Flammenatomabsorptionsspektrometrisches Verfahren (FAAS)
Cuivre et alliages de cuivre - Dosage de l'etain - Partie 4 : Etain en moyenne teneur -
Méthode par spectrométrie d'absorption atomique dans la flamme (SAAF)
Ta slovenski standard je istoveten z: CEN/TS 15022-4:2006
ICS:
77.120.30 Baker in bakrove zlitine Copper and copper alloys
SIST-TS CEN/TS 15022-4:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

TECHNICAL SPECIFICATION
CEN/TS 15022-4
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
November 2006
ICS 77.120.30

English Version
Copper and copper alloys - Determination of tin content - Part 4:
Medium tin content - Flame atomic absorption spectrometry
method (FAAS)
Cuivre et alliages de cuivre - Dosage de l'etain - Partie 4 : Kupfer und Kupferlegierungen - Bestimmung des
Etain en moyenne teneur - Méthode par spectrométrie Zinngehaltes - Teil 4: Mittlerer Zinngehalt -
d'absorption atomique dans la flamme (SAAF) Flammenatomabsorptionsspektrometrisches Verfahren
(FAAS)
This Technical Specification (CEN/TS) was approved by CEN on 12 September 2006 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15022-4:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

CEN/TS 15022-4:2006 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Reagents and materials .4
5 Apparatus .5
6 Sampling.5
7 Procedure .5
8 Expression of results .7
9 Precision.8
10 Test report .9
Bibliography .10


2

---------------------- Page: 3 ----------------------

CEN/TS 15022-4:2006 (E)
Foreword
This document (CEN/TS 15022-4:2006) has been prepared by Technical Committee CEN/TC 133 “Copper and
copper alloys”, the secretariat of which is held by DIN.
Within its programme of work, Technical Committee CEN/TC 133 requested CEN/TC 133/WG 10 "Methods of
analysis" to prepare the following Technical Specification:
CEN/TS 15022-4, Copper and copper alloys — Determination of tin content — Part 4: Medium tin content — Flame
atomic absorption spectrometry method (FAAS)
This is one of four parts of the standard/technical specification for the determination of tin content in copper and
copper alloys. The other parts are:
prEN 15022-1, Copper and copper alloys — Determination of tin content — Part 1: Titrimetric method
prEN 15022-2, Copper and copper alloys — Determination of tin content — Part 2: Spectrometric method
EN 15022-3, Copper and copper alloys — Determination of tin content — Part 3: Low tin content — Flame atomic
absorption spectrometry method (FAAS)
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United
Kingdom.

3

---------------------- Page: 4 ----------------------

CEN/TS 15022-4:2006 (E)
1 Scope
This Technical Specification specifies a flame atomic absorption spectrometric method (FAAS) for the determina-
tion of the tin content of copper and copper alloys in the form of unwrought, wrought and cast products.
The method is applicable to products having medium tin mass fractions between 0,2 % and 3 %.
2 Normative references
The following referenced documents are indispensable for the application of this European Technical Specification.
For dated references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 1811-1, Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 1:
Sampling of cast unwrought products
ISO 1811-2, Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2:
Sampling of wrought products and castings
3 Principle
Dissolution of a test portion in hydrochloric acid and hydrogen peroxide followed, after suitable dilution, by aspira-
tion into a nitrous oxide/acetylene flame of an atomic absorption spectrometer. Measurement of the absorption of
the 286,3 nm line emitted by a tin hollow-cathode discharge lamp.
4 Reagents and materials
4.1 General
During the analysis, use only reagents of recognized analytical grade and only distilled water or water of equivalent
purity.
4.2 Hydrochloric acid, HCl (ρ = 1,19 g/ml)
4.3 Hydrochloric acid solution, 7 + 3
Dilute 700 ml of hydrochloric acid (4.2) in 300 ml of water.
4.4 Hydrogen peroxide, H O 30 % (mass fraction) solution, free from tin base stabilizers
2 2
Hydrogen peroxide may be stabilized by products containing some tin. It is therefore necessary to use exactly the
same volume of hydrogen peroxide for the dissolution of the test sample as for the preparation of the calibration so-
lution.
4.5 Tin stock solution, 1 g/ l Sn
Weigh (1 ± 0,001) g of tin (Sn ≥ 99 %) and transfer it into a 250 ml beaker. Dissolve it in 100 ml hydrochloric acid
(4.2) and several drops of hydrogen peroxide (4.4) and cover with a watch glass. Heat gently until the metal is dis-
solved. Cool to room temperature and transfer the solution quantitatively into a 1 000 ml one-mark volumetric flask.
Dilute to the mark with water and mix well.
1 ml of this solution contains 1 mg of Sn.
4

---------------------- Page: 5 ----------------------

CEN/TS 15022-4:2006 (E)
4.6 Copper base solution, 20 g/l Cu
Weigh 10,0 g of electrolytic copper (Cu ≥ 99,95 %) into a 600 ml beaker. Add 250 ml of the hydrochloric acid
solution (4.3) and cover with a watch glass. Cool and add successively 5 ml hydrogen peroxide portions (4.4) until
dissolution is complete, waiting after each addition until all effervescence ceases. Heat to eliminate the excess hy-
drogen peroxide. Cool and transfer this solution quant
...