Radio Equipment and Systems (RES); Technical characteristics and methods of measurement for survival craft portable VHF radiotelephone apparatus

To convert I-ETS to ETS (with no change)

Radijska oprema in sistemi (RES) – Tehnične karakteristike in merilne metode za prenosne radiotelefonske aparate VHF za rešilne čolne

General Information

Status
Published
Publication Date
30-Nov-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003

Buy Standard

Standard
ETS 300 225 E2:2003
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 225 E2:2003
01-december-2003
5DGLMVNDRSUHPDLQVLVWHPL 5(6 ±7HKQLþQHNDUDNWHULVWLNHLQPHULOQHPHWRGH]D
SUHQRVQHUDGLRWHOHIRQVNHDSDUDWH9+)]DUHãLOQHþROQH
Radio Equipment and Systems (RES); Technical characteristics and methods of
measurement for survival craft portable VHF radiotelephone apparatus
Ta slovenski standard je istoveten z: ETS 300 225 Edition 2
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST ETS 300 225 E2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 225 E2:2003

---------------------- Page: 2 ----------------------

SIST ETS 300 225 E2:2003
EUROPEAN ETS 300 225
TELECOMMUNICATION April 1997
STANDARD Second Edition
Source: ETSI TC-RES Reference: RE/RES-01024
ICS: 33.020
Key words: Maritime, radio, SAR, testing
Radio Equipment and Systems (RES);
Technical characteristics and methods of
measurement for survival craft portable VHF
radiotelephone apparatus
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 225 E2:2003
Page 2
ETS 300 225: April 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 225 E2:2003
Page 3
ETS 300 225: April 1997
Contents
Foreword .7
1 Scope .9
2 Normative references.9
3 Abbreviations.9
4 General requirements .10
4.1 Construction.10
4.2 Frequencies and power .10
4.3 Controls.10
4.4 Switching time.11
4.5 Safety precautions .11
4.6 Class of emission and modulation characteristics.11
4.7 Battery.11
4.8 Labelling.12
5 Test conditions, power sources and ambient temperatures .12
5.1 Normal and extreme test conditions .12
5.2 Test power source .12
5.3 Normal test conditions .12
5.3.1 Normal temperature and humidity.12
5.3.2 Normal power source .13
5.4 Extreme test conditions .13
5.4.1 Extreme temperatures.13
5.4.1.1 Upper extreme temperature .13
5.4.1.2 Lower extreme temperature .13
5.4.2 Extreme test power supply values.13
5.4.2.1 Upper extreme test voltage .13
5.4.2.2 Lower extreme test voltage .13
5.5 Procedure for tests at extreme temperatures.13
6 General conditions of measurement .13
6.1 Test connections.13
6.2 Arrangements for test signals applied to the receiver input.14
6.3 Receiver mute or squelch facility .14
6.4 Normal test modulation.14
6.5 Artificial antenna .14
6.6 Test channels .14
6.7 Measurement uncertainty and interpretation of the measuring results.14
6.7.1 Measurement uncertainty.14
6.7.2 Interpretation of the measurement results .15
7 Environmental tests.15
7.1 Introduction .15
7.2 Procedure .15
7.3 Performance check.15
7.4 Drop test on hard surface .16
7.4.1 Definition .16
7.4.2 Method of measurement .16
7.4.3 Requirement.16
7.5 Vibration test.16
7.5.1 Method of measurement .16
7.5.2 Requirement.17
7.6 Temperature tests.17
7.6.1 General.17

---------------------- Page: 5 ----------------------

SIST ETS 300 225 E2:2003
Page 4
ETS 300 225: April 1997
7.6.2 Dry heat cycle . 17
7.6.2.1 Method of measurement. 17
7.6.2.2 Requirement . 17
7.6.3 Damp heat cycle . 17
7.6.3.1 Method of measurement. 17
7.6.3.2 Requirement . 18
7.6.4 Low temperature cycle. 18
7.6.4.1 Method of measurement. 18
7.6.4.2 Requirement . 18
7.7 Corrosion test (sea water test) . 18
7.7.1 General . 18
7.7.2 Method of measurement. 18
7.7.3 Requirements . 19
7.8 Immersion test. 19
7.8.1 Method of measurement. 19
7.8.2 Requirements . 19
7.9 Thermal shock. 19
7.9.1 Method of measurement. 19
7.9.2 Requirements . 20
7.10 Solar radiation . 20
7.10.1 Method of measurement. 20
7.10.2 Requirements . 20
7.11 Oil resistance test. 20
7.11.1 Method of measurement. 20
7.11.2 Requirement . 20
8 Field measurement. 20
8.1 Transmitter Effective Radiated Power (ERP). 21
8.1.1 Definition. 21
8.1.2 Method of measurement. 21
8.1.3 Limit . 21
8.2 Spurious emissions from the transmitter. 21
8.2.1 Definition. 21
8.2.2 Method of measurement. 22
8.2.3 Limit . 22
8.3 Spurious emissions from the receiver. 22
8.3.1 Definition. 22
8.3.2 Method of measurement. 22
8.3.3 Limit . 22
9 Transmitter . 22
9.1 Frequency error. 22
9.1.1 Definition. 22
9.1.2 Method of measurement. 22
9.1.3 Limit . 23
9.2 Carrier power referenced to ERP. 23
9.2.1 Definition. 23
9.2.2 Method of measurement. 23
9.2.3 Limits . 23
9.3 Frequency deviation .23
9.3.1 Definition. 23
9.3.2 Maximum permissible frequency deviation. 23
9.3.2.1 Method of measurement. 23
9.3.2.2 Limit. 23
9.3.3 Reduction of frequency deviation at modulation frequencies above 3 kHz . 24
9.3.3.1 Method of measurement. 24
9.3.3.2 Limits. 24
9.4 Limitation characteristics of the modulator. 24
9.4.1 Definition. 24
9.4.2 Method of measurement. 24
9.4.3 Limits . 24
9.5 Sensitivity of the modulator, including microphone . 25
9.5.1 Definition. 25

---------------------- Page: 6 ----------------------

SIST ETS 300 225 E2:2003
Page 5
ETS 300 225: April 1997
9.5.2 Method of measurement .25
9.5.3 Limit.25
9.6 Audio frequency response .25
9.6.1 Definition .25
9.6.2 Method of measurement .25
9.6.3 Limit.25
9.7 Audio frequency harmonic distortion of the emission .25
9.7.1 Definition .25
9.7.2 Method of measurement .25
9.7.2.1 Normal test conditions .25
9.7.2.2 Extreme test conditions .25
9.7.3 Limit.26
9.8 Adjacent channel power.26
9.8.1 Definition .26
9.8.2 Method of measurement .26
9.8.3 Limits.26
9.9 Residual modulation of the transmitter .26
9.9.1 Definition .26
9.9.2 Method of measurement .26
9.9.3 Limit.27
9.10 Transient frequency behaviour of the transmitter .27
9.10.1 Definitions.27
9.10.2 Method of measurement .27
9.10.3 Limits.28
10 Receiver .30
10.1 Harmonic distortion and rated audio frequency output power .30
10.1.1 Definition .30
10.1.2 Methods of measurement .30
10.1.3 Limits.30
10.2 Audio frequency response .30
10.2.1 Definition .30
10.2.2 Method of measurement .30
10.2.3 Limits.31
10.3 Maximum usable sensitivity .31
10.3.1 Definition .31
10.3.2 Method of measurement .31
10.3.3 Limits.31
10.4 Co-channel rejection.31
10.4.1 Definition .31
10.4.2 Method of measurement .31
10.4.3 Limit.32
10.5 Adjacent channel selectivity.32
10.5.1 Definition .32
10.5.2 Method of measurement .32
10.5.3 Limits.32
10.6 Spurious response rejection .32
10.6.1 Definition .32
10.6.2 Method of measurement .32
10.6.3 Limit.33
10.7 Intermodulation response .33
10.7.1 Definition .33
10.7.2 Method of measurement .33
10.7.3 Limit.33
10.8 Blocking or desensitisation .33
10.8.1 Definition .33
10.8.2 Method of measurement .33
10.8.3 Limit.34
10.9 Amplitude response of the receiver limiter.34
10.9.1 Definition .34
10.9.2 Method of measurement .34
10.9.3 Limit.34
10.10 Receiver noise .34

---------------------- Page: 7 ----------------------

SIST ETS 300 225 E2:2003
Page 6
ETS 300 225: April 1997
10.10.1 Definition. 34
10.10.2 Method of measurement. 34
10.10.3 Limit . 34
11 Secondary battery charger. 35
11.1 General. 35
11.2 Environmental tests. 35
11.2.1 Introduction . 35
11.2.2 Vibration test. 35
11.2.2.1 Method of measurement. 35
11.2.2.2 Requirement . 36
11.2.3 Temperature tests . 36
11.2.3.1 General . 36
11.2.3.2 Dry heat cycle. 36
11.2.3.3 Damp heat cycle . 36
11.2.3.4 Low temperature cycle. 36
11.2.4 Corrosion test . 37
11.2.4.1 General . 37
11.2.4.2 Method of measurement. 37
11.2.4.3 Requirements. 38
11.3 Charging time. 38
Annex A (normative): Measuring receiver for adjacent channel power measurement. 39
A.1 Power measuring receiver specification . 39
A.1.1 IF filter . 39
A.1.2 Attenuation indicator. 40
A.1.3 rms value indicator . 40
A.1.4 Oscillator and amplifier. 40
Annex B (normative): Solar radiation test source .41
B.1 Simulated solar radiation source . 41
History. 42

---------------------- Page: 8 ----------------------

SIST ETS 300 225 E2:2003
Page 7
ETS 300 225: April 1997
Foreword
This European Telecommunication Standard (ETS) has been produced by the Radio Equipment and
Systems (RES) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS defines the minimum technical characteristics required for portable VHF radio telephones
operating in survival craft, and optionally on board ships at sea, in certain frequency bands allocated to the
Maritime Mobile Service (MMS). It also incorporates the requirements detailed in the Radio Regulations,
International Convention for the Safety Of Life At Sea SOLAS 1974 (as amended in 1988) [3] and the
relevant recommendations of the International Maritime Organization.
Every ETS prepared by ETSI is a voluntary standard. This ETS contains text concerning type approval of
the equipment to which it relates. This text does not make this ETS mandatory in its status as a standard.
However, this ETS can be referenced, wholly or in part, for mandatory application by decisions of
regulatory bodies.
Transposition dates
Date of adoption: 18 April 1997
Date of latest announcement of this ETS (doa): 31 July 1997
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 31 January 1998
Date of withdrawal of any conflicting National Standard (dow): 31 January 1998

---------------------- Page: 9 ----------------------

SIST ETS 300 225 E2:2003
Page 8
ETS 300 225: April 1997
Blank page

---------------------- Page: 10 ----------------------

SIST ETS 300 225 E2:2003
Page 9
ETS 300 225: April 1997
1 Scope
This ETS states the minimum technical characteristics required for portable VHF radiotelephones
operating in the bands between 156 MHz and 174 MHz allocated to the Maritime Mobile Services by the
Radio Regulations (see Radio Regulations, Appendices 18 [1] and 19 [2]) and suitable for use in survival
craft and, optionally, on board ships at sea. The requirements detailed in the Radio Regulations,
International Convention for the Safety Of Life At Sea SOLAS 1974 [3], and the International Maritime
Organization Resolutions A.694(17) [5] and A.762(18) [4] are incorporated in this ETS.
2 Normative references
This ETS incorporates by dated or undated reference provisions from other publications. These normative
references are cited at the appropriate places in the text and the publications are listed hereafter. For
dated references, subsequent references to or revisions of any of these publication apply to this ETS only
when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies.
[1] Radio Regulations, Appendix 18: "Table of Transmitting Frequencies in the
Band 156 - 174 MHz for Stations in the Maritime Mobile Service".
[2] Radio Regulations, Appendix 19: "Technical Characteristics for Transmitters
and Receivers used in th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.