iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 15220:2024

(Main)

Railway applications - Brake indicators

Railway applications - Brake indicators

This European Standard specifies the requirements for the design, dimensions, performance and testing of single/double brake indicators. It applies to pneumatically and electrically operating brake indicators visible from the outside of the vehicle.
NOTE   Brake indicators are for giving information about release and application of the brake.
This European Standard applies to brake indicators on railway vehicles used on the main national networks, urban networks, underground railways, trams and private networks (regional railways, company railways etc.).
This document does not apply to brake indicator for magnetic track brake or eddy current brake.

Bahnanwendungen - Bremsanzeigevorrichtungen

Applications ferroviaires - Indicateurs de freins

Le présent document spécifie les exigences relatives à la fonction, à la conception, aux performances et aux essais des indicateurs de frein. Elle s'applique aux indicateurs de frein visibles depuis l'extérieur du véhicule ferroviaire.

Železniške naprave - Kazalniki zavor

General Information

Status
Not Published
Public Enquiry End Date
11-Jan-2024
ICS
45.040 - Materials and components for railway engineering
45.060.01 - Railway rolling stock in general
Technical Committee
IŽNP - Reilway applications
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
16-Nov-2023
Due Date
04-Apr-2024
Directive
2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
prEN 15220 - Railway applications - Brake indicators

Relations

Replaces
SIST EN 15220:2016 - Railway applications - Brake indicators
Effective Date
07-Dec-2022

Buy Standard

prEN 15220:2024prEN 15220:2024
PreviousNext
Draft
prEN 15220:2024
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 15220:2024
01-januar-2024
Nadomešča:
SIST EN 15220:2016
Železniške naprave - Kazalniki zavor
Railway applications - Brake indicators
Bahnanwendungen - Bremsanzeigevorrichtungen
Applications ferroviaires - Indicateurs de freins
Ta slovenski standard je istoveten z: prEN 15220
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
oSIST prEN 15220:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15220:2024

---------------------- Page: 2 ----------------------
oSIST prEN 15220:2024


DRAFT
EUROPEAN STANDARD
prEN 15220
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2023
ICS Will supersede EN 15220:2016
English Version

Railway applications - Brake indicators
Applications ferroviaires - Indicateurs de freins Bahnanwendungen - Bremsanzeigevorrichtungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15220:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15220:2024
prEN 15220:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviated terms . 6
5 Requirements . 6
5.1 Functional requirements. 6
5.1.1 General . 6
5.1.2 Application/release status . 6
5.1.3 Lubrication (pneumatic brake indicator) . 6
5.1.4 Leakage (pneumatic brake indicator) . 6
5.1.5 Electrical characteristics . 6
5.2 Operating conditions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15355:2019+A1:2023(Main + Amendment)
Railway applications - Braking - Distributor valves and distributor-isolating devices
EN 15355:2019+A1:2023

This document applies to distributor valves and distributor-isolating devices.
The distributor valves contained in this document are of graduable release type. Direct release types are not included.
Functionally they are regarded as not containing relay valves of any type, even if the relay valves are physically an integral part of the distributor valves.
This document applies to both distributor-isolating devices mounted separate from the distributor valve and distributor-isolating devices integral with the distributor valve.
This document specifies the requirements for the design, testing and quality assurance of distributor valves and distributor-isolating devices.
The distributor valve and distributor-isolating device are intended to be part of a brake system mounted in a vehicle with maximum length of 31 m and maximum brake pipe volume of 25 l taking into consideration brake pipe inner diameters between 25 mm and 32 mm.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15437-1:2009+A1:2023(Main)
Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
EN 15437-1:2009+A1:2022

This part of EN 15437 defines the minimum characteristics for the interface between a trackside Hot Axlebox Detector (HABD) and Rolling Stock (RST) that comply with the European Directives for Interoperability to ensure that the minimum functional requirement of the interface is achieved.
The minimum requirements of the interface apply to:
a)   Rolling stock conforming to standard European railway gauge, that is 1 435 mm;
b)   Rolling stock axles fitted with outboard bearings;
NOTE 1   The design of rolling stock axles fitted with inboard bearings should respect the requirements set out in Note 2 of 5.2.
c)   Rolling stock with a maximum design speed lower than 250 km/h;
NOTE 2   Interoperable rolling stock with a maximum design speed higher than or equal to 250 km/h are mandated to have on-board equipment for axlebox condition monitoring. The requirements for on-board equipment are described in !EN 15437-2:2012+A1:2022.
NOTE 3   Interoperable rolling stock with a maximum design speed higher than or equal to 250 km/h are outside the scope of this Part of the standard. However, if such rolling stock are required to be monitored by HABDs their target area should comply with the requirements specified in this standard, except where stated otherwise.
d)   Trackside HABDs that are required to monitor rolling stock with a maximum design speed higher than or equal to 250 km/h.
The rolling stock requirements of the interface are described in Clause 5 and for the HABD requirements of the interface are described in Clause 6.
The scope of this part (part 1) of the standard does not include:
-   Hot Wheel (Hot Disc) Detectors (HWDs). However, HWD are often installed in combination with trackside HABD to provide a dual monitoring system. This standard does not prevent the use of such a combination;
-   how a HABD measures the temperature and identifies axle box position. This is part of an individual equipment design and not part of the functional requirements of this standard;
-   operational requirements for acting on the information reported by the HABD system;
-   maintenance requirements for HABD systems.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14601:2005+A2:2022(Main)
Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
EN 14601:2005+A2:2021

This document is applicable to manually operated end cocks designed to cut-off the brake pipe and the main reservoir pipe of the air brake and compressed air system of rail vehicles; without taking the type of vehicles and track-gauge into consideration.
This document specifies requirements for the design, dimensions, testing and certification (qualification and/or homologation), and marking.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14198:2017+A2:2021(Main)
Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives
EN 14198:2016+A2:2021

This European Standard specifies basic requirements for the braking of trains hauled by locomotives:
-   For trains hauled by locomotives and intended for use in general operation each vehicle is fitted with the traditional brake system with a brake pipe compatible with the UIC brake system.
NOTE   This ensures technical compatibility of the brake function between vehicles of various origins in a train (see 5.4).
-   For trains hauled by locomotives and intended for use in fixed or predefined formation, the requirements on the vehicle and the train are necessary. In the case of a UIC brake system, this standard applies; if not, the EN 16185 series or the EN 15734 series applies.
If concerned, the UIC brake architecture described in this standard (see 5.4) can be used for brakes for multiple unit train and high speed trains and urban rail described in the EN 13452 series, the EN 16185 series and the EN 15734 series.
This European Standard also takes into account electrical and electronic control functions and additional brake systems like dynamic brakes and adhesion independent brakes.
The brake system requirements, which are specific for on-track machines are set out in EN 14033 1.
This European Standard does not apply to Urban Rail rolling stock braking system, which is specified by EN 13452 1.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17065:2018(Main)
Railway applications - Braking - Passenger coach test procedure
EN 17065:2018

This European Standard specifies test methods and acceptance criteria for a brake system used in passenger coaches and driving trailers for use in general operation.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15437-1:2009/kFprA1:2022(Amendment)
Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
EN 15437-1:2009/FprA1

Revised Annex ZA

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 17997-1:2023(Main)
Railway applications - Braking - Definition of ETCS brake curve parameters for Gamma trains - Part 1: Emergency brake curve parameters
prEN 17997-1

This Document specifies the methodology to be used to define ETCS brake parameters for gamma trains intended to operate on lines equipped with ETCS Baseline 3.
This Document does not specify the way these parameters can be used by ETCS on-board system.

  • Draft
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14601:2005+A1:2011/oprA2:2021(Amendment)
Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
EN 14601:2005+A1:2010/prA2

Revised Annex ZA

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 14198:2023(Main)
Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives
prEN 14198

This document specifies basic requirements for the braking of trains hauled by locomotives:
- For trains hauled by locomotives and intended for use in general operation each vehicle is fitted with the traditional brake system with a brake pipe compatible with the UIC brake system.
NOTE This ensures technical compatibility of the brake function between vehicles of various origins in a train (see 5.4).
- For trains hauled by locomotives and intended for use in fixed or predefined formation, the requirements on the vehicle and the train are necessary.
In the case of a UIC brake system, this standard applies; if not, the EN 16185 series or the EN 15734 series applies.
If concerned, the UIC brake architecture described in this standard (see 5.4) can be used for brakes for multiple unit train and high speed trains and urban rail described in the EN 13452 series, the EN 16185 series and the EN 15734 series.
This document also takes into account electrical and electronic control functions and additional brake systems like dynamic brakes and adhesion independent brakes. The brake system requirements, which are specific for on-track machines are set out in EN 14033-1.
This document does not apply to Urban Rail rolling stock braking system, which is specified by EN 13452-1.

  • Draft
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15734-1:2011/oprA1:2021(Amendment)
Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions
EN 15734-1:2010/prA1

Revised annex ZA

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day