SIST EN 60652:2005
(Main)Loading tests on overhead line structures
Loading tests on overhead line structures
Applicable to testing of towers and structures of overhead lines for voltages above 45 kV. Codifies methods of tests.
Belastungsprüfungen an Freileitungstragwerken
Essais mécaniques des structures de lignes aériennes
Applicable aux essais de pylônes et structures des lignes aériennes pour tensions supérieures à 45 kV. Codifie les méthodes d'essai.
Preskusi obremenitev nosilnih konstrukcij nadzemnih vodov
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60652:2005
STANDARD
februar 2005
Preskusi obremenitev nosilnih konstrukcij nadzemnih vodov
Loading tests on overhead line structures
ICS 29.240.20 Referenčna številka
SIST EN 60652:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60652
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2004
ICS 29.240.20
English version
Loading tests on overhead line structures
(IEC 60652:2002)
Essais mécaniques des structures Belastungsprüfungen an
de lignes aériennes Freileitungstragwerken
(CEI 60652:2002) (IEC 60652:2002)
This European Standard was approved by CENELEC on 2004-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60652:2004 E
---------------------- Page: 2 ----------------------
EN 60652:2004 - 2 -
Foreword
The text of the International Standard IEC 60652:2002, prepared by IEC TC 11, Overhead lines, was
submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60652 on
2004-02-01 without any modification.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60652:2002 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60652:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-466 1990 International electrotechnical vocabulary - -
(IEV)
Chapter 466: Overhead lines
EN ISO/IEC 17025
ISO/IEC 17025 1999 General requirements for the 2000
competence of testing and calibration
laboratories
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE IEC
60652
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2002-06
Essais mécaniques des structures
de lignes aériennes
Loading tests on overhead line
structures
IEC 2002 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
L
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 5 ----------------------
60652 IEC:2002 – 3 –
CONTENTS
FOREWORD.5
1 Scope.7
2 Normative references.7
3 Definitions .7
4 Categories of tests.9
4.1 Design tests .9
4.2 Sample tests .9
5 General test criteria .11
6 Test specification.11
7 Test programme .13
8 Assembly of support .13
9 Load application .13
9.1 Combined loads.13
9.2 Precautions for load application .15
9.3 Load levels .15
9.4 Tolerances on applied loads .15
9.5 Loading rate and holding period .15
10 Measurements.17
10.1 Load and angle measurements. .17
10.2 Deflection measurements .17
10.3 Strain measurements.17
11 Sequence of test loading cases.17
12 Video documentation .17
13 Acceptance criteria .17
14 Premature failure .19
14.1 Design tests .19
14.2 Sample tests .19
14.3 Replacement of components.19
15 Material specification .19
16 Test report.21
17 Record and traceability .23
---------------------- Page: 6 ----------------------
60652 IEC:2002 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOADING TESTS ON OVERHEAD
LINE STRUCTURES
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60652 has been prepared by IEC technical committee 11: Overhead
lines.
This second edition cancels and replaces the first edition, published in 1979, and constitutes
a technical revision.
The text of this standard is based on the following documents:
FDIS Report on voting
11/167/FDIS 11/168/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
The committee has decided that the contents of this publication will remain unchanged until 2004.
At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
---------------------- Page: 7 ----------------------
60652 IEC:2002 – 7 –
LOADING TESTS ON OVERHEAD
LINE STRUCTURES
1 Scope
This International Standard codifies the methods of testing supports for overhead lines.
It is applicable to the testing of supports and structures of overhead lines for voltages above
45 kV; it can also serve as reference to the testing of lower voltage supports.
There is no restriction on the type of material used in the fabrication of the supports which may
include, but not be limited to, metallic alloys, concrete, timber, laminated wood and composite
materials. If required by the client, this standard may also be applied to the testing of
telecommunication supports, railway/tramway overhead electrification supports, electrical
substation gantries, street lighting columns, wind turbine towers, ski-lift supports, etc.
Tests on reduced scale models of supports are not covered by this standard.
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of
the referenced document (including any amendments) applies.
IEC 60050(466):1990, International Electrotechnical Vocabulary (IEV) – Chapter 466:
Overhead lines
ISO/IEC 17025:1999, General requirements for the competence of testing and calibration
laboratories
3 Definitions
For the purposes of this International Standard, the following definitions apply. The definitions
listed below supplement those given in lEC 60050(466).
3.1
client
organization which contracts with the testing station and provides the test specification
3.2
design load
load for which the support has been designed
---------------------- Page: 8 ----------------------
60652 IEC:2002 – 9 –
3.3
failure load
point at which the support cannot carry any additional load
NOTE It is also known as the limit state failure load and is determined during a destruction test on the support.
3.4
test report
document summarizing all the relevant aspects of the tests
4 Categories of tests
With respect to the purpose of the test, the level of instrumentation and the method of
execution, this standard refers to two categories of tests:
a) design tests;
b) sample tests.
4.1 Design tests
Design tests are normally carried out on prototype supports, with one or more of the following
objectives:
a) as part of a research and/or development programme in the design of an innovative
support;
b) to verify compliance of the support design with the speci
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.