Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 2: Abstract test suite (ISO 16410-2:2018)

The ISO 16410 series provides a suite of tests in order to assess the Front End (FE) and Back End (BE)
behaviour’s compliancy towards the requirements listed in ISO 17575-3. This document contains
the definition of such tests in the form of test cases, reflecting the required individual steps listed in
specific test purposes defined in ISO 16410-1. The test cases are written in Testing and Test Control
Notation version 3 (TTCN v3).

Elektronische Gebührenerhebung - Konformitätsbeurteilung von Geräten nach ISO/TS 17575-3 - Teil 2: Abstrakte Prüfreihe (ISO 16410-2:2018)

Perception du télépéage - Évaluation de la conformité de l'équipement à l'ISO 17575-3 - Partie 2: Suite d'essais abstraite (ISO 16410-2:2018)

Les normes ISO 16410 (toutes parties) ont pour domaine d'application la fourniture d'une série d'essais ayant pour but d'évaluer la conformité des comportements du système frontal (FE) et du système central (BE) par rapport aux exigences énumérées dans l'ISO 17575‑3. Le présent document contient la définition de tels essais sous forme de cas d'essais, reflétant les étapes individuelles requises énumérées dans les buts d'essais spécifiques tels que définis dans l'ISO 16410‑1. Les cas d'essais sont écrits dans la version 3 de Notation des essais et des contrôles d'essais (TTCN v3).

Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme z ISO 17575-3 - 2. del: Abstraktni preskuševalni niz (ISO 16410-2:2018)

Skupina standardov ISO 16410 določa preskuševalni niz za ocenjevanje skladnosti vedenja čelnega (FE) in zalednega (BE) dela glede zahtev, ki so navedene v standardu ISO 17575-3. Ta dokument vsebuje opredelitve teh preskusov v obliki preskusnih primerov, ki odražajo posamezne korake, navedene v določenih namenih preskušanja, določenih v standardu ISO 16410-1. Preskusni primeri so zapisani v 3. različici zapisa preskušanja in krmilnih preskusov (TTCN v3).

General Information

Status
Withdrawn
Public Enquiry End Date
09-Jul-2017
Publication Date
08-Jan-2019
Withdrawal Date
19-Dec-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
19-Dec-2023
Due Date
11-Jan-2024
Completion Date
20-Dec-2023

Relations

Buy Standard

Standard
EN ISO 16410-2:2019 - BARVE
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 16410-2:2017 - BARVE
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16410-2:2019
01-februar-2019
1DGRPHãþD
SIST-TS CEN ISO/TS 16410-2:2012
Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme z ISO 17575-3 -
2. del: Abstraktni preskuševalni niz (ISO 16410-2:2018)
Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 2:
Abstract test suite (ISO 16410-2:2018)
Elektronische Gebührenerhebung - Konformitätsbeurteilung von Geräten nach ISO/TS
17575-3 - Teil 2: Abstrakte Prüfreihe (ISO 16410-2:2018)
Perception du télépéage - Évaluation de la conformité de l'équipement à l'ISO 17575-3 -
Partie 2: Suite d'essais abstraite (ISO 16410-2:2018)
Ta slovenski standard je istoveten z: EN ISO 16410-2:2018
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST EN ISO 16410-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16410-2:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 16410-2:2019


EN ISO 16410-2
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2018
EUROPÄISCHE NORM
ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 16410-2:2012
English Version

Electronic fee collection - Evaluation of equipment for
conformity to ISO 17575-3 - Part 2: Abstract test suite (ISO
16410-2:2018)
Perception du télépéage - Évaluation de la conformité Elektronische Gebührenerhebung -
de l'équipement à l'ISO 17575-3 - Partie 2: Suite Konformitätsbeurteilung von Geräten nach ISO/TS
d'essais abstraite (ISO 16410-2:2018) 17575-3 - Teil 2: Abstrakte Prüfreihe (ISO 16410-
2:2018)
This European Standard was approved by CEN on 1 November 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16410-2:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16410-2:2019
EN ISO 16410-2:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 16410-2:2019
EN ISO 16410-2:2018 (E)
European foreword
This document (EN ISO 16410-2:2018) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 16410-2:2012.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands,
...

SLOVENSKI STANDARD
oSIST prEN ISO 16410-2:2017
01-julij-2017
Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme z ISO 17575-3 -
2. del: Abstraktni preskuševalni niz (ISO/DIS 16410-2:2017)
Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 2:
Abstract test suite (ISO/DIS 16410-2:2017)
Elektronische Gebührenerhebung - Konformitätsbeurteilung von Geräten nach ISO/TS
17575-3 - Teil 2: Abstrakte Prüfreihe (ISO/DIS 16410-2:2017)
Perception du télépéage - Évaluation de la conformité de l'équipement à l'ISO 17575-3 -
Partie 2: Suite d'essais abstraite (ISO/DIS 16410-2:2017)
Ta slovenski standard je istoveten z: prEN ISO 16410-2
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
oSIST prEN ISO 16410-2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16410-2:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16410-2:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16410-2
ISO/TC 204 Secretariat: ANSI
Voting begins on: Voting terminates on:
2017-05-04 2017-07-26
Electronic fee collection — Evaluation of equipment for
conformity to ISO/TS 17575-3 —
Part 2:
Abstract test suite
Perception du télépéage — Évaluation de la conformité de l’équipement à l’ISO/TS 17575-3 —
Partie 2: Suite d’essais abstraite
ICS: 03.220.20; 35.240.60
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16410-2:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16410-2:2017
ISO/DIS 16410-2:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 16410-2:2017
ISO/DIS 16410-2:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 Abstract Test Method (ATM) . 2
5.1 Introduction . 2
5.2 Te
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.