SIST EN IEC 60730-2-13:2018/AC:2018 - Automatic electrical controls

Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls

IEC corrigendum

Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche Anwendungen - Teil 2-13: Besondere Anforderungen an feuchtigkeitsempfindliche Regel- und Steuergeräte

Dispositifs de commande électrique automatiques à usage domestique et analogue - Partie 2-13: Règles particulières pour les dispositifs de commande sensibles à l'humidité

Avtomatske električne krmilne naprave - 2-13. del: Posebne zahteve za zaznavala (senzorje) vlage

General Information

Status

Published

Publication Date

21-May-2018

ICS

97.120 - Automatic controls for household use

Technical Committee

ISS EIT.NZG - Household apliances

Current Stage

6060 - National Implementation/Publication (Adopted Project)

Start Date

25-Apr-2018

Due Date

30-Jun-2018

Completion Date

22-May-2018

Directive

2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits

Mandate

M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive

Ref Project

EN IEC 60730-2-13:2018/AC:2018-04 - Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls

Relations

Corrects

SIST EN IEC 60730-2-13:2018 - Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls

Effective Date

06-Mar-2018

Buy Standard

Corrigendum

EN IEC 60730-2-13:2018/AC:2018

English language

3 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Standards Content (Sample)

EN IEC 60730-2-13:2018/AC:2018

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche Anwendungen - Teil 2-13: Besondere Anforderungen an feuchtigkeitsempfindliche Regel- und SteuergeräteDispositifs de commande électrique automatiques à usage domestique et analogue - Partie 2-13: Règles particulières pour les dispositifs de commande sensibles à l'humiditéAutomatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls97.120Avtomatske krmilne naprave za domAutomatic controls for household useICS:Ta slovenski standard je istoveten z:EN IEC 60730-2-13:2018/AC:2018-04SIST EN IEC 60730-2-13:2018/AC:2018en01-julij-2018SIST EN IEC 60730-2-13:2018/AC:2018SLOVENSKI
STANDARD

SIST EN IEC 60730-2-13:2018/AC:2018

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN IEC 60730-2-13:2018/AC:2018-04
April 2018
ICS 97.120 English Version
Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls (IEC 60730-2-13:2017/COR1:2018)
Dispositifs de commande électrique automatiques à usage domestique et analogue - Partie 2-13: Règles particulières pour les dispositifs de commande sensibles à l'humidité (IEC 60730-2-13:2017/COR1:2018)
Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche Anwendungen - Teil 2-13: Besondere Anforderungen an feuchtigkeitsempfindliche Regel- und Steuergeräte (IEC 60730-2-13:2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST

SIST EN 60730-1:2016/A2:2022(Amendment)

Automatic electrical controls - Part 1: General requirements

EN 60730-1:2016/A2:2022

2022-04-07: This EN has no DOW.
NEXT ACTION: TC ACTION by 2022-06-01
2021-12-16: DOW removed from A1 further to D170/C058. Mother EN has no DOW (justification in foreword)
2021-09-24: prAA including common mods to this A2 will be presented soon to BT
NEXT ACTION: TC ACTION by 2021-12-01
2020-08-19: NEXT ACTION BY TC: to deliver Annexes for FV assessment.

Amendment
16 pages
English language
sale 10% off
e-Library read for
1 day

10-Apr-2022
97.120
ISS EIT.NZG

SIST

SIST EN IEC 60730-2-14:2019/A2:2022(Amendment)

Automatic electrical controls - Part 2-14: Particular requirements for electric actuators

EN IEC 60730-2-14:2019/A2:2021

Amendment
10 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN IEC 60730-2-8:2021/A1:2022(Amendment)

Automatic electrical controls - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements

EN IEC 60730-2-8:2020/A1:2021

No scope available

Amendment
9 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN IEC 60730-2-7:2021(Main)

Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches

EN IEC 60730-2-7:2020

IEC 60730-2-7:2015(E) applies to timers and time switches for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof, including heating, air conditioning and similar applications. This standard is also applicable to individual timers utilized as part of a control system or timers which are mechanically integral with multifunctional controls having non-electrical outputs. This standard does not apply to time-delay switches (TDS) within the scope of IEC 60669-2-3. This standard applies to the inherent safety, to the operating characteristics where such are associated with equipment protection and to the testing of timers used in appliances and other apparatus, electrical and non-electrical, for household and similar purposes, but also extended to industrial purposes when no dedicated product standards exist, such as that for central heating, air conditioning, process heating, etc. Timers for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This third edition cancels and replaces the second edition published in 2008. This third edition constitutes a technical revision. This new edition revises the compliance criteria of type 1.S and 2.S action, revises the requirements for filament lamp loads, adds requirements for abnormal operation in Annex H, removes some special requirements for single countries as well as updates the standard to IEC 60730-1:2010, fourth edition.
Key words: Timers, Time Switches

Standard
27 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN 60730-2-5:2015/A2:2021(Amendment)

Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems

EN 60730-2-5:2015/A2:2021

2020-01-16 PeC: Annexes ZZ for LVD and EMC are pending on part 1

Amendment
12 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN IEC 60730-2-8:2021(Main)

Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements

EN IEC 60730-2-8:2020

EC 60730-2-8:2018 applies to electrically operated water valves for use in, on or in association with equipment for household and similar use, including heating, air-conditioning and similar applications. The equipment can use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This document is applicable to electrically operated water valves for building automation within the scope of ISO 16484. This document also applies to automatic electrically operated water valves for equipment that can be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This document does not apply to electrically operated water valves intended exclusively for industrial process applications unless explicitly mentioned in the relevant equipment standard. This document applies to electrically operated water valves powered by primary or secondary batteries, requirements for which are contained within the standard, including Annex V. This document does not cover the prevention of contamination of drinking water as a result of contact with materials. This document applies to the inherent safety, to the operating values, operating times and operating sequences where such are associated with equipment safety, and to the testing of automatic electrical control devices used in, on or in association with, household and similar equipment. This document contains requirements for electrical features of water valves and requirements for mechanical features of valves that affect their intended operation. This document is also applicable to electrically operated water valves for appliances within the scope of the IEC 60335 series of standards. This document does not apply to:
- electrically operated water valves of nominal connection size above DN 50;
- electrically operated water valves for admissible nominal pressure rating above 1,6 MPa;
- food dispensers;
- detergent dispensers;
- steam valves;
- electrically operated water valves designed exclusively for industrial applications. This document applies to electrically operated water valves, responsive to or controlling such characteristics as temperature, pressure, passage of time, humidity, light, electrostatic effects, flow, or liquid level, current, voltage, acceleration, or combinations thereof. This document also applies to actuators and to valve bodies which are designed to be fitted to each other. This document applies to individual valves, valves utilized as part of a system and valves mechanically integral with multi-functional controls having non-electrical outputs. This document applies to AC or DC powered electrically operated water valves with a rated voltage not exceeding 690 V AC or 600 V DC. This document does not take into account the response value of an automatic action of a valve, if such a response value is dependent upon the method of mounting the valve in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate equipment standard or as determined by the manufacturer shall apply.

Standard
51 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN IEC 60730-2-11:2021(Main)

Automatic electrical controls - Part 2-11: Particular requirements for energy regulators

EN IEC 60730-2-11:2020

IEC 60730-2-11:2019 is available as IEC 60730-2-11:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60730-2-11:2019 applies to energy regulators for use in, on, or in association with equipment, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof.
This standard applies to the inherent safety, to the operating values, operating times and operating sequence where these are associated with equipment safety, and to the testing of automatic electrical energy regulator devices used in, or in association with, equipment.
This standard is also applicable to energy regulators for appliances within the scope of IEC 60335-1.
Throughout this standard the word “equipment” means “appliance and equipment”.
This standard also applies to automatic electrical energy regulators for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications.
This standard does not apply to automatic electrical energy regulators designed exclusively for industrial process applications unless explicitly mentioned in the equipment standard.
This standard does not apply to equipment that are specifically within the scope of building automation equipment.
This standard is also applicable to individual energy regulators utilized as part of a control system or energy regulators which are mechanically integral with multi-functional controls having non-electrical outputs.
This standard applies to controls powered by primary or secondary batteries, requirements for which are contained within the standard, including Annex V
This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) revision to the title to remove “for household and similar use”;
b) changes to the scope and related modifications;
c) changes to definitions in Annex H.
This Part 2-11 is intended to be used in conjunction with IEC 60730 1. It was established on the basis of the fifth edition of that standard (2013) including Amendment 1 (2015). Consideration may be given to future editions of, or amendments to, IEC 60730-1.
Keywords: Automatic Controls, Energy Regulators, Control Systems

Standard
17 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN 60730-2-6:2016/A1:2021(Amendment)

Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

EN 60730-2-6:2016/A1:2020

NEXT ACTION: UNDER BT CONSULTATION, CLOSING ON 2020-03
2020-01-17 PeC: to pe published un-harmonized
2019-12-12 PeC: DOW to be set to DOR + 36 months
2019-10-23 PC: submission pending on the result of Part1
2019-06-13 PC: TC to updade EMC and LVD Annex ZZ
2019-03-19: to contact PM before proceeding with any assessment request.

Amendment
6 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN IEC 60730-2-9:2019/A2:2020(Amendment)

Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control

EN IEC 60730-2-9:2019/A2:2020

2019-03-19: to contact PM before proceeding with any assessment request.

Amendment
6 pages
English language
sale 10% off
e-Library read for
1 day
Amendment
6 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN IEC 60730-2-22:2020(Main)

Automatic electrical controls for household and similar use - Part 2-22: Particular requirements for thermal motor protectors

EN IEC 60730-2-22:2020

EN-IEC 60730-2-22 applies to the partial evaluation of thermal motor protectors asdefined in IEC 60730-1 for household and similar use, including heating, air conditioning andsimilar applications as well as for sealed (hermetic and semi-hermetic type) motorcompressors.NOTE A thermal motor protector is considered an integrated control since its protective functionality isdependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combinationwith the relevant motor. This dependency is illustrated by:• the ability of the thermal motor protector to accurately and reliably sense the heat of the motor windings;thus, addressing the over-temperature protection due to motor overload conditions;• the ability of the thermal motor protector to accurately and reliably sense the current due to motor lockedrotorconditions; thus, reducing the response time and not being adversely affected by heat-sink at theassembly spot in the application;• the influence of the motor’s electromagnetic field on the switch behaviour of the thermal motor protector;particularly, affecting the arc direction between the contacts resulting in uneven wear of the contact materialand eventually leading to failure of operation.Requirements concerning the testing of the combination of sealed (hermetic and semihermetictype) motor-compressors and thermal motor protectors are given inIEC 60335-2-34.

Standard
31 pages
English language
sale 10% off
e-Library read for
1 day