Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls

This part of IEC 60730 applies to automatic electrical humidity sensing controls for use in, on
or in association with equipment, including controls for heating, air-conditioning and similar
applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc.
or a combination thereof.
NOTE Throughout this standard, the word "equipment" includes "appliance" and "control system".
This International Standard is applicable to automatic electrical humidity sensing controls
forming part of a building automation control system within the scope of ISO 16484.
This standard also applies to automatic electrical humidity sensing controls for equipment that
may be used by the public, such as equipment intended to be used in shops, offices,
hospitals, farms and commercial and industrial applications.
This standard does not apply to automatic electrical humidity sensing controls intended
exclusively for industrial process applications unless explicitly mentioned in the equipment
standard.

Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche Anwendungen - Teil 2-13: Besondere Anforderungen an feuchtigkeitsempfindliche Regel- und Steuergeräte

Dispositifs de commande électrique automatiques à usage domestique et analogue - Partie 2-13: Règles particulières pour les dispositifs de commande sensibles à l'humidité

IEC 60730-2-13:2017 s’applique aux dispositifs de commande électrique automatiques sensibles à l'humidité pour usage dans, sur ou avec des matériels y compris les dispositifs de commande électrique pour le chauffage, le conditionnement d’air et les applications analogues. Le matériel peut utiliser l’électricité, le gaz, le pétrole, des combustibles solides, l’énergie thermique solaire, etc. ou une combinaison de ces sources d'énergie.
La présente Norme internationale s’applique aux dispositifs de commande électrique automatiques sensibles à l’humidité faisant partie d’un système d'automatisation et de gestion technique du bâtiment relevant du domaine d’application de l’ISO 16484.
La présente norme s’applique également aux dispositifs de commande électrique automatiques sensibles à l’humidité des matériels qui peuvent être utilisés par le public (les matériels destinés à être utilisés dans des magasins, des bureaux, des hôpitaux, des fermes et des applications commerciales et industrielles, par exemple).
La présente norme ne s’applique pas aux dispositifs de commande électrique automatiques sensibles à l’humidité prévus exclusivement pour des applications industrielles, sauf mention particulière dans la norme du matériel.
Cette troisième édition annule et remplace la deuxième édition parue en 2006. Cette édition constitue une révision technique. Elle s'aligne sur le texte de la cinquième édition de l’IEC 60730-1, et inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- alignement des exigences CEM de l'Article H.26 sur celles des autres normes de la Partie 2;
- ajout d’exigences à l'Article H.27 pour couvrir les fonctions de commande de classe B et de classe C des dispositifs de commande sensibles à l’humidité.
La présente Partie 2-13 doit être utilisée conjointement avec l’IEC 60730-1. Elle a été établie sur la base de la cinquième édition (2013) de cette norme. Les éditions futures de l'IEC 60730-1, ou ses amendements, pourront être pris en considération.
La présente Partie 2-13 complète ou modifie les articles correspondants de l’IEC 60730-1 de façon à la transformer en norme IEC: Exigences particulières pour les dispositifs de commande sensibles à l'humidité.
Lorsque la présente Partie 2-13 spécifie «addition», «modification» ou «remplacement», il convient d'adapter l'exigence, la modalité d'essai ou le commentaire correspondant de la Partie 1 en conséquence.
Lorsqu’aucune modification n'est nécessaire, la présente Partie 2-13 indique que l'article ou le paragraphe approprié est applicable.
Le contenu du corrigendum de février 2018 a été inclus dans cette copie.
Mots clés: contrôles, sensibles à l'humidité, système de contrôle

Avtomatske električne krmilne naprave - 2-13. del: Posebne zahteve za zaznavala (senzorje) vlage

Ta del standarda IEC 60730 se uporablja za avtomatska električna zaznavala (senzorje) vlage, ki se uporabljajo v opremi, na njej ali v povezavi z njo, kar vključuje ogrevanje, klimatske naprave in podobno. Za opremo se lahko uporabljajo elektrika, plin, nafta, trdno gorivo, sončna toplotna energija itd.
ali kombinacija naštetega.
OPOMBA: Beseda »oprema« v tem standardu vključuje »napravo« in »kontrolni sistem«.
Ta mednarodni standard se uporablja za avtomatska električna zaznavala (senzorje) vlage, ki so del sistema za avtomatizacijo in nadzor stavb na področju uporabe standarda ISO 16484.
Ta standard se uporablja tudi za avtomatska električna zaznavala (senzorje) za opremo za javno uporabo, kot je oprema, namenjena za uporabo v trgovinah, pisarnah, bolnišnicah, na kmetijah ter za komercialno in industrijsko uporabo.
Ta standard se ne uporablja za avtomatska električna zaznavala (senzorje), namenjene izključno za industrijsko uporabo, razen če ni to izrecno navedeno v ustreznem standardu za opremo.

General Information

Status
Published
Publication Date
03-Jun-2018
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-May-2018
Due Date
26-Jul-2018
Completion Date
04-Jun-2018

Relations

Buy Standard

Standard
EN IEC 60730-2-13:2018
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60730-2-13:2018
01-julij-2018
1DGRPHãþD
SIST EN 60730-2-13:2008
$YWRPDWVNHHOHNWULþQHNUPLOQHQDSUDYHGHO3RVHEQH]DKWHYH]D]D]QDYDOD
VHQ]RUMH YODJH
Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing
controls
Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche
Anwendungen - Teil 2-13: Besondere Anforderungen an feuchtigkeitsempfindliche Regel
- und Steuergeräte
Dispositifs de commande électrique automatiques à usage domestique et analogue -
Partie 2-13: Règles particulières pour les dispositifs de commande sensibles à l'humidité
Ta slovenski standard je istoveten z: EN IEC 60730-2-13:2018
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST EN IEC 60730-2-13:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 60730-2-13:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 60730-2-13:2018


EUROPEAN STANDARD EN IEC 60730-2-13

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2018
ICS 97.120 Supersedes EN 60730-2-13:2008
English Version
Automatic electrical controls - Part 2-13: Particular requirements
for humidity sensing controls
(IEC 60730-2-13:2017)
Dispositifs de commande électrique automatiques - Partie Automatische elektrische Regel- und Steuergeräte für den
2-13: Règles particulières pour les dispositifs de commande Hausgebrauch und ähnliche Anwendungen - Teil 2-13:
sensibles à l'humidité Besondere Anforderungen an feuchtigkeitsempfindliche
(IEC 60730-2-13:2017) Regel- und Steuergeräte
(IEC 60730-2-13:2017)
This European Standard was approved by CENELEC on 2017-11-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60730-2-13:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 60730-2-13:2018
EN IEC 60730-2-13:2018 (E)
European foreword
The text of document 72/1078/FDIS, future edition 3 of IEC 60730-2-13, prepared by IEC/TC 72
"Automatic electrical controls", was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60730-2-13:2018.
The following dates are fixed:
(dop) 2018-10-13
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2021-04-13
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 60730-2-13:2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60730-2-13:2017 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN IEC 60730-2-13:2018



IEC 60730-2-13

®


Edition 3.0 2017-10




INTERNATIONAL



STANDARD



















Automatic electrical controls –

Part 2-13: Particular requirements for humidity sensing controls


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 97.120 ISBN 978-2-8322-4900-0



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 5 ----------------------

SIST EN IEC 60730-2-13:2018
– 2 – IEC 60730-2-13:2017 © IEC 2017
CONTENTS
FOREWORD . 3
1 Scope and normative references . 5
2 Terms and definitions . 5
3 General requirements . 6
4 General notes on tests . 6
5 Rating. 6
6 Classification . 6
7 Information . 6
8 Protection against electric shock . 6
9 Provision for protective earthing . 6
10 Terminals and terminations . 6
11 Constructional requirements . 6
12 Moisture and dust resistance . 6
13 Electric strength and insulation resistance . 7
14 Heating . 7
15 Manufacturing deviation and drift . 7
16 Environmental stress . 7
17 Endurance . 7
18 Mechanical strength . 8
19 Threaded parts and connections . 8
20 Creepage distances, clearances and distances through solid insulation . 8
21 Resistance to heat, fire and tracking . 8
22 Resistance to corrosion . 8
23 Electromagnetic compatibility (EMC) requirements – Emission . 8
24 Components . 8
25 Normal operation . 9
26 Electromagnetic compatibility (EMC) requirements – Immunity . 9
27 Abnormal operation . 9
28 Guidance on the use of electronic disconnection . 9
Annex H (normative) Requirements for electronic controls . 9
Annex AA (normative) Independently mounted and in-line cord controls . 16
Annex BB (normative) Regional differences . 17
Annex CC (informative) Specific regional requirements in Japan . 19
Bibliography . 20

Table H.101 – Compliance criteria . 11
Table AA.1 – Number of cycles . 16
Table BB.1 – Minimum number of cycles for independently mounted and in-line cord
controls (United States) . 17
Table BB.2 – Minimum number of cycles for independently mounted and in-line cord
controls (Canada) . 18

---------------------- Page: 6 ----------------------

SIST EN IEC 60730-2-13:2018
IEC 60730-2-13:2017 © IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

AUTOMATIC ELECTRICAL CONTROLS –

Part 2-13: Particular requirements for humidity sensing controls

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60730-2-13 has been prepared by IEC technical committee 72:
Automatic electrical controls.
The text of this standard is based on the following documents:
FDIS Report on voting
72/1078/FDIS 72/1108/RVD

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
This third edition cancels and replaces the second edition published in 2006. This edition
constitutes a technical revision. This edition includes alignment with the text of 60730-1 fifth
edition and the following significant technical changes with respect to the previous edition:

---------------------- Page: 7 ----------------------

SIST EN IEC 60730-2-13:2018
– 4 – IEC 60730-2-13:2017 © IEC 2017
a) alignment of the EMC requirements in Clause H.26 to those in other part 2 standards;
b) addition of requirements in Clause H.27 to cover class B and C control functions of
humidity sensing controls.
This Part 2-13 is intended to be used in conjunction with IEC 60730-1. It was established on
the basis of the fifth edition of that standard (2013). Consideration may be given to future
editions of, or amendments to, IEC 60730-1.
This Part 2-13 supplements or modifies the corresponding clauses in IEC 60730-1, so as to
convert that publication into the IEC standard: Particular requirements for humidity sensing
controls.
Where this Part 2-13 states "addition", "modification" or "replacement", the relevant
requirement, test specification or explanatory matter in Part 1 should be adapted accordingly.
Where no change is necessary, this Part 2-13 indicates that the relevant clause or subclause
applies.
In the development of a fully international standard it has been necessary to take into
consideration the differing requirements resulting from practical experience in various parts of
the world and to recognize the variation in national electrical systems and wiring rules.
In this publication, the following print types are used:
• Requirements proper: in roman type.
• Test specifications: in italic type.
• Explanatory matter: in smaller roman type.
Subclauses, notes or items which are additional to those in Part 1 are numbered starting from
101, additional annexes are lettered AA, BB, etc.
A list of all parts of the IEC 60730 series, under the general title Automatic electrical controls
can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
The contents of the corrigendum of February 2018 have been included in this copy.

---------------------- Page: 8 ----------------------

SIST EN IEC 60730-2-13:2018
IEC 60730-2-13:2017 © IEC 2017 – 5 –
AUTOMATIC ELECTRICAL CONTROLS –

Part 2-13: Particular requirements for humidity sensing controls



1 Scope and normative references
This clause of Part 1 is applicable except as follows:
1.1 Scope
Replacement:
This part of IEC 60730 applies to automatic electrical humidity sensing controls for use in, on
or in association with equipment, including controls for heating, air-conditioning and similar
applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc.
or a combination thereof.
NOTE Throughout this standard, the word "equipment" includes "appliance" and "control system".
This International Standard is applicable to automatic electrical humidity sensing controls
forming part of a building automation control system within the scope of ISO 16484.
This standard also applies to automatic electrical humidity sensing controls for equipment that
may be used by the public, such as equipment intended to be used in shops, offices,
hospitals, farms and commercial and industrial applications.
This standard does not apply to automatic electrical humidity sensing controls intended
exclusively for industrial process applications unless explicitly mentioned in the equipment
standard.
1.1.2 Replacement:
This standard applies to automatic electrical controls, mechanically or electrically operated,
responsive to or controlling humidity.
1.1.3 Not applicable.
2 Terms and definitions
This clause of Part 1 is applicable except as follows:
2.2 Definitions of types of control according to purpose
2.2.19 Addition:
Note 1 to entry: In general, a humidity sensing control is an operating control.
Additional definitions:
2.2.101
humidity sensing control
automatic electrical control which is either intended to keep the controlled humidity above,
below or between a particular value(s)

---------------------- Page: 9 ----------------------

SIST EN IEC 60730-2-13:2018
– 6 – IEC 60730-2-13:2017 © IEC 2017
2.2.102
room humidistat
independently mounted or incorporated humidity sensing control intended to control the
humidity of habitable space
3 General requirements
This clause of Part 1 is applicable.
4 General notes on tests
This clause of Part 1 is applicable.
5 Rating
This clause of Part 1 is applicable.
6 Classification
This clause of Part 1 is applicable except as follows:
6.3.9 Additional subclauses:
6.3.9.101 – humidity sensing control;
6.3.9.102 – room humidistat;
7 Information
This clause of Part 1 is applicable.
8 Protection against electric shock
This clause of Part 1 is applicable.
9 Provision for protective earthing
This clause of Part 1 is applicable.
10 Terminals and terminations
This clause of Part 1 is applicable.
11 Constructional requirements
This clause of Part 1 is applicable.
12 Moisture and dust resistance
This clause of Part 1 is applicable.

---------------------- Page: 10 ----------------------

SIST EN IEC 60730-2-13:2018
IEC 60730-2-13:2017 © IEC 2017 – 7 –
13 Electric strength and insulation resistance
This clause of Part 1 is applicable except as follows:
Table 12 (13.2 of edition 3) – Insulation or disconnection test voltages
Addition to footote p:
In the case of humidity sensing controls, it may be necessary to provide specially calibrated samples to enable
this test to be performed.
14 Heating
This clause of Part 1 is applicable.
15 Manufacturing deviation and drift
This clause of Part 1 is applicable except as follows:
15.4 Addition:
Alternatively, the declare
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.