oSIST prEN IEC 61754-13:2023
(Main)Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 13: Type FC-PC connector family
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 13: Type FC-PC connector family
D133/C027: for all CLC/TC 86BXA revisions of standards, the dow is set to dow= dor + 12 months
Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 13: Bauart FC-PC Steckverbinderfamilie
Interfaces de connecteurs pour fibres optiques - Partie 13: Connecteurs de type FC-PC
Optični spojni elementi in pasivne komponente - Vmesniki za optične konektorje - 13. del: Družina konektorjev vrste FC-PC
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61754-13:2023
01-julij-2023
Optični spojni elementi in pasivne komponente - Vmesniki za optične konektorje -
13. del: Družina konektorjev vrste FC-PC
Fibre optic interconnecting devices and passive components - Fibre optic connector
interfaces - Part 13: Type FC-PC connector family
Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 13: Bauart FC-PC
Steckverbinderfamilie
Interfaces de connecteurs pour fibres optiques - Partie 13: Connecteurs de type FC-PC
Ta slovenski standard je istoveten z: prEN IEC 61754-13:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61754-13:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61754-13:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61754-13:2023
86B/4756/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61754-13 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-06-02 2023-08-25
SUPERSEDES DOCUMENTS:
86B/4677/CD, 86B/4727A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces
- Part 13: Type FC-PC connector family
PROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61754-13:2023
IEC CDV 61754-13/Ed3 IEC:2023 – 2 – 86B/4756/CDV
1 CONTENTS
2
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 3.1 Screw coupling mechanism . 5
8 4 Description . 6
9 5 Interfaces . 6
10 5.1 General . 6
11 5.2 Intermateability . 6
12 5.3 Interfaces and dimensions . 6
13
14 Figure 1 – Plug connector interface . 7
15 Figure 2 – Adaptor connector interface . 10
16 Figure 3 – Pin gauge for adaptor. 12
17 Figure 4 – Active device receptacle interface . 13
18 Figure 5 – Pin gauge for active device receptacle . 15
19
20 Table 1 – Intermateability of interfaces . 6
21 Table 2 – Dimensions of the plug connector interface (Figure 1) . 8
22 Table 3 – Grade characteristics for plug connector (Figure 1) . 9
23 Table 4 – Dimensions of the adaptor connector interface (Figure 2) . 11
24 Table 5 – Pin gauge dimensions (Figure 3) . 12
25 Table 6 – Dimensions of the active device receptacle interface (Figure 4) . 14
26 Table 7 – Alignment feature grade of the active device receptacle interface (Figure 4) . 14
27 Table 8 – Pin gauge dimensions (Figure 5) . 15
28
29
---------------------- Page: 4 ----------------------
oSIST prEN IEC 61754-13:2023
IEC CDV 61754-13/Ed3 IEC:2023 – 3 – 86B/4756/CDV
30 INTERNATIONAL ELECTROTECHNICAL COMMISSION
31 ___________
32
33 FIBRE OPTIC INTERCONNECTING
34 DEVICES AND PASSIVE COMPONENTS –
35 FIBRE OPTIC CONNECTOR INTERFACES –
36
37 Part 13: Type FC-PC connector family
38
39 FOREWORD
40 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
41 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
42 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
43 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
44 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
45 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
46 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
47 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
48 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
49 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
50 consensus of opinion on the relevant subjects since each technical committee has representation from all
51 interested IEC National Committees.
52 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
53 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
54 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
55 misinterpretation by any end user.
56 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
57 transparently to the maximum extent possible in their national and regional publications. Any divergence between
58 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
59 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
60 declared to be in conformity with an IEC Publication.
61 6) All users should ensure that they have the latest edition of this publication.
62 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
63 members of its technical committees and IEC National Committees for any personal injury, property damage or
64 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
65 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
66 Publications.
67 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
68 indispensable for the correct application of this publication.
69 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
70 rights. IEC shall not be held responsible for identifying any or all such patent rights.
71 International Standard IEC 61754-13 has been prepared by subcommittee 86B: Fibre optic
72 interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
73 This third edition cancels and replaces the second edition published in 2006. This edition constitutes a
74 technical revision.
75 This edition includes the following significant technical changes with respect to the previous edition:
76 a) Revising normative reference reflecting the latest documents.
77 b) Addition of intermateability in 5.2.
78 c) Changes of dimensions of the plug connector interface in Table 2 and 3.
79 d) Addition of Grade A , B and C in Table 3.
m m m
80 The text of this standard is based on the following documents:
FDIS Report on voting
---------------------- Page: 5 ----------------------
oSIST prEN IEC 61754-13:2023
IEC CDV 61754-13/Ed3 IEC:2023 – 4 – 86B/4756/CDV
86B/xxxx/FDIS 86B/xxxx/RVD
81
82 Full information on the voting for the approval of this standard can be found in the report on
83 voting indicated in the above table.
---------------------- Page: 6 ----------------------
oSIST prEN IEC 61754-13:2023
IEC CDV 61754-13/Ed3 IEC:2023 – 5 – 86B/4756/CDV
84 FIBRE OPTIC INTERCONNECTING
85 DEVICES AND PASSIVE COMPONENTS –
86 FIBRE OPTIC CONNECTOR INTERFACES –
87
88 Part 13: Type FC-PC connector family
89
90 1 Scope
91 This part of IEC 61754 defines the standard interface dimensions for the type FC-PC family of
92 connectors.
93 2 Normative references
94 The following documents are referred to in the text in such a way that some or all of their content
95 constitutes requirements of this document. For dated references, only the edition cited applies.
96 For undat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.