iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 277 S1:1995/A1:1997

(Amendment)

Safety of household and similar electrical appliances -- Part 2: Particular requirements for motor-compressors

Safety of household and similar electrical appliances -- Part 2: Particular requirements for motor-compressors

Certification period: 60 months * Superseded by EN 60335-2-34:1996

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2: Besondere Anforderungen für Motorverdichter

Sécurité des appareils électrodomestiques et analogues -- Partie 2: Règles particulières pour les moto-compresseurs

Safety of household and similar electrical appliances - Part 2: Particular requirements for motor compressors - Amendment A2

General Information

Status
Withdrawn
Publication Date
31-May-1997
Withdrawal Date
31-Mar-1999
ICS
23.140 - Compressors and pneumatic machines
Technical Committee
VGA - Safety of household and similar electrical appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Apr-1999
Due Date
01-Apr-1999
Completion Date
01-Apr-1999
Directive
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
HD 277 S1:1985/A2:1995 - Safety of household and similar electrical appliances - Part 2: Particular requirements for motor-compressors

Relations

Replaced By
SIST EN 60335-2-34:1997 - Safety of household and similar electrical appliances -- Part 2-34: Particular requirements for motor-compressors
Effective Date
29-Jan-2023

Buy Standard

HD 277 S1:1995/A1:1997HD 277 S1:1995/A1:1997
PreviousNext
Amendment
HD 277 S1:1995/A1:1997
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 277 S1:1995/A1:1997
01-junij-1997
Safety of household and similar electrical appliances - Part 2: Particular
requirements for motor compressors - Amendment A2
Safety of household and similar electrical appliances -- Part 2: Particular requirements
for motor-compressors
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2:
Besondere Anforderungen für Motorverdichter
Sécurité des appareils électrodomestiques et analogues -- Partie 2: Règles particulières
pour les moto-compresseurs
Ta slovenski standard je istoveten z: HD 277 S1:1985/A2:1995
ICS:
23.140 .RPSUHVRUMLLQSQHYPDWLþQL Compressors and p
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60335-2-34:2023/A11:2023(Amendment)
Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors
EN IEC 60335-2-34:2023/A11:2023

This European Standard deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V for single-phase motor-compressors and 480 V for other motor-compressors

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60335-2-34:2023(Main)
Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors (IEC 60335-2-34:2021)
EN IEC 60335-2-34:2023

This European Standard deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V for single-phase motor-compressors and 480 V for other motor-compressors.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60335-2-34:2013(Main)
Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors
EN 60335-2-34:2013

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V for single-phase motor-compressors and 480 V for other motorcompressors. This standard does not supersede the requirements of standards relevant to the particular appliance in which the motor-compressor is used. However, if the motor-compressor type used complies with this standard, the tests for the motor-compressor specified in the particular appliance standard may not need to be made in the particular appliance or assembly. If the motor-compressor control system is associated with the particular appliance control system, additional tests may be necessary on the final appliance. So far as is practical, this standard deals with the common hazards presented by motorcompressors used in appliances which are encountered by all persons in and around the home. However, it does not in general take into account - the use of appliances by young children or infirm persons without supervision; - playing with the appliances by young children.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60335-2-34:2023(Main)
Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors (IEC 60335-2-34:2021)
EN IEC 60335-2-34:2023

This European Standard deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V for single-phase motor-compressors and 480 V for other motor-compressors.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60335-2-34:2023/A11:2023(Amendment)
Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors
EN IEC 60335-2-34:2023/A11:2023

This European Standard deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V for single-phase motor-compressors and 480 V for other motor-compressors

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16147:2017+A1:2023(Main)
Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units
EN 16147:2017+A1:2022

This European Standard specifies methods for testing, rating of performance and calculation of water heating energy efficiency of air/water, brine/water, water/water and direct exchange/water heat pump water heaters and heat pump combination heaters with electrically driven compressors and connected to or including a domestic hot water storage tank for domestic hot water production.
This European Standard comprises only the testing procedure for the domestic hot water production of the heat pump system.
NOTE 1   Testing procedures for simultaneous operation for domestic hot water production and space heating are not treated in this standard. Simultaneous means that domestic hot water production and space heating generation occur at the same time and may interact.
NOTE 2   For heat pump combination heaters the seasonal efficiency of space heating is determined according to EN 14825.
This European Standard only applies to water heaters which are supplied in a package of heat pump and storage tank. In the case of water heaters consisting of several parts with refrigerant connections, this European Standard applies only to those designed and supplied as a complete package.
This European Standard does not specify requirements of the quality of the used water.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12583:2022(Main)
Gas Infrastructure - Compressor stations - Functional requirements
EN 12583:2022

This European Standard describes the specific functional requirements for the design, construction, operation, maintenance and disposal activities for safe and secure gas compressor stations.
This European Standard applies to new gas compressor stations with a Maximum Operating Pressure (MOP) over 16 bar and with a total shaft power over 1 MW. For existing compressor stations, this European Standard applies  to  new  compressor  units.  Where  changes/modifications  to  existing  installations  or  gas  composition take place, due account may be taken of the requirements of this European Standard.
This European Standard does not apply to gas compressor stations operating prior to the publication of this European Standard.
The purpose of this European Standard is intended to:
—  ensure the health and safety of the public and all site personnel,
—  to cover environmental issues and
—  to avoid incidental damage to nearby property and
—  to open the gas infrastructure to accommodate renewable gases.
This European Standard does not apply to:
—  off-shore gas compressor stations;
—  gas compressor stations for compressed natural gas filling-stations;
—  customer installations downstream of the point of custody transfer;
—  design and construction of driver packages (see Annex C);
—  mobile compressor equipment.
For supplies to utility services such as small central heating boilers reference should be made to EN 1775.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13771-2:2018(Main)
Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units
EN 13771-2:2017

This European Standard applies only to condensing units for refrigeration and describes a number of selected performance test methods. These methods provide sufficiently accurate results for the determination of the refrigerating capacity, power absorbed, refrigerant mass flow and the coefficient of performance.
This European Standard applies only to performance tests conducted at the manufacturer's works or wherever the instrumentation and load stability for testing to the accuracy required is available.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16147:2017/AC:2017(Corrigendum)
Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units
EN 16147:2017/AC:2017
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13771-1:2017(Main)
Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors
EN 13771-1:2016

This part of this European Standard applies only to refrigerant compressors and describes a number of selected performance test methods. These methods provide sufficiently accurate results for the determination of the refrigerating capacity, power absorbed, refrigerant mass flow, isentropic efficiency and the coefficient of performance. This standard applies only to performance tests conducted at the manufacturer's works or wherever the equipment for testing to the accuracy required is available.
The type of measuring instrument and the allowable uncertainty within which measurements shall be made are listed in normative Aannex A.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day