SIST EN 13286-48:2005

Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation

This European Standard specifies a test method for the determination of the degree of pulverization of cohesive material after mixing with lime and/or hydraulic binder.

Ungebundene und hydraulisch gebundene Gemische - Teil 48: Prüfverfahren zur Bestimmung des Pulverisierungsgrades

Dieses Dokument legt ein Verfahren zur Bestimmung des Pulverisierungsgrades von Böden fest, die mit Kalk und/oder hydraulischem Bindemittel behandelt wurden.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 48: Méthode d'essai pour la détermination du degré de pulvérisation

Le présent document spécifie une méthode pour déterminer le degré de pulvérisation des matériaux cohésifs traités a la chaux et/ou avec un liant hydraulique.

Nevezane in hidravlično vezane zmesi – 48. del: Preskusna metoda za določanje stopnje zdrobljivosti

General Information

• Status: Published
• Publication Date: 31-Oct-2005
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2005
• Due Date: 01-Nov-2005
• Completion Date: 01-Nov-2005
• Ref Project: EN 13286-48:2005 - Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13286-48:2005
01-november-2005
Nevezane in hidravlično vezane zmesi – 48. del: Preskusna metoda za določanje
stopnje zdrobljivosti
Unbound and hydraulically bound mixtures - Part 48: Test method for the determination
of degree of pulverisation
Ungebundene und hydraulisch gebundene Gemische - Teil 48: Prüfverfahren zur
Bestimmung des Pulverisierungsgrades
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 48: Méthode
d'essai pour la détermination du degré de pulvérisation
Ta slovenski standard je istoveten z: EN 13286-48:2005
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 13286-48:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13286-48:2005

---------------------- Page: 2 ----------------------
SIST EN 13286-48:2005
EUROPEAN STANDARD
EN 13286-48
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2005
ICS 93.080.20
English version
Unbound and hydraulically bound mixtures - Part 48: Test
method for the determination of degree of pulverisation
Graves traitées aux liants hydrauliques et graves non Ungebundene und hydraulisch gebundene Gemische - Teil
traitées - Partie 48: Méthode d'essai pour la détermination 48: Prüfverfahren zur Bestimmung des
du degré de pulvérisation Pulverisierungsgrades
This European Standard was approved by CEN on 27 June 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13286-48:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13286-48:2005
EN 13286-48:2005 (E)
Contents
Page
Foreword .3
1 Scope .5
2 Principle.5
3 Apparatus .5
4 Procedure .5
5 Calculation and expression of results.6
6 Test report .6


2

---------------------- Page: 4 ----------------------
SIST EN 13286-48:2005
EN 13286-48:2005 (E)
Foreword
This European Standard (EN 13286-48:2005) has been prepared by Technical Committee CEN/TC 227 “Road
mixtures”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by February 2006, and conflicting national standards shall be withdrawn at the latest
by February 2006.
This European Standard is one of a series of standards as listed below.
EN 13286-1, Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and
water content - Introduction, general requirements and sampling.
EN 13286-2, Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and
water content - Proctor compaction.
EN 13286-3, Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and
water content - Vibrocompression with controlled parameters.
EN 13286-4, Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and
water content - Vibrating hammer.
EN 13286-5, Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and
water content - Vibrating table.
EN 13286-7, Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures.
EN 13286-40, Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct
tensile strength of hydraulically bound mixtures.
EN 13286-41, Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the
compressive strength of hydraulically bound mixtures
...

SLOVENSKI STANDARD
SIST EN 13286-48:2005
01-november-2005
1HYH]DQHLQKLGUDYOLþQRYH]DQH]PHVL±GHO3UHVNXVQDPHWRGD]DGRORþDQMH
VWRSQMH]GUREOMLYRVWL
Unbound and hydraulically bound mixtures - Part 48: Test method for the determination
of degree of pulverisation
Ungebundene und hydraulisch gebundene Gemische - Teil 48: Prüfverfahren zur
Bestimmung des Pulverisierungsgrades
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 48: Méthode
d'essai pour la détermination du degré de pulvérisation
Ta slovenski standard je istoveten z: EN 13286-48:2005
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 13286-48:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13286-48:2005

---------------------- Page: 2 ----------------------

SIST EN 13286-48:2005
EUROPEAN STANDARD
EN 13286-48
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2005
ICS 93.080.20
English version
Unbound and hydraulically bound mixtures - Part 48: Test
method for the determination of degree of pulverisation
Graves traitées aux liants hydrauliques et graves non Ungebundene und hydraulisch gebundene Gemische - Teil
traitées - Partie 48: Méthode d'essai pour la détermination 48: Prüfverfahren zur Bestimmung des
du degré de pulvérisation Pulverisierungsgrades
This European Standard was approved by CEN on 27 June 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13286-48:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13286-48:2005
EN 13286-48:2005 (E)
Contents
Page
Foreword .3
1 Scope .5
2 Principle.5
3 Apparatus .5
4 Procedure .5
5 Calculation and expression of results.6
6 Test report .6


2

---------------------- Page: 4 ----------------------

SIST EN 13286-48:2005
EN 13286-48:2005 (E)
Foreword
This European Standard (EN 13286-48:2005) has been prepared by Technical Committee CEN/TC 227 “Road
mixtures”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by February 2006, and conflicting national standards shall be withdrawn at the latest
by February 2006.
This European Standard is one of a series of standards as listed below.
EN 13286-1, Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and
water content - Introduction, general requirements and sampling.
EN 13286-2, Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and
water content - Proctor compaction.
EN 13286-3, Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and
water content - Vibrocompression with controlled parameters.
EN 13286-4, Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and
water content - Vibrating hammer.
EN 13286-5, Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and
water content - Vibrating table.
EN 13286-7, Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures.
EN 13286-40, Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct
tensile strength of hydraulically bound mixtures.
EN 13286-41, Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the
compressive strength of hydraulically bound mixtures.
...