Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 1: Test suite structure and test purposes (ISO 16410-1:2017)

The ISO 16410 series provides a suite of tests in order to assess compliance of the Front End and Back
End behaviours in relation to the requirements in ISO 17575-3. This document contains the definition of
such tests in the form of test purposes, listing the required initial conditions, references and individual
steps in a structured textual manner. ISO 16410-2 contains the identical tests written in testing and
test control notation version 3 (TTCN v3).
The test purposes defined in this document reflect the structural and semantic requirements stated in
ISO 17575-3.
— Presence/absence of particular data elements (see ISO 17575-3:2016, 8.5.5);
— Semantics related to various data elements, e.g.:
— Activation of context data and handling multiple contexts (see ISO 17575-3:2016, 8.3);
— Handling the precedence and priority levels (see ISO 17575-3:2016, 8.5.2 to 8.5.4);
— Uniqueness of relevant data elements (see ISO 17575-3:2016, 8.5.2 to 8.5.4);
— Correct definition of the charge objects (see ISO 17575-3:2016, 8.5.4);
— Fee calculation algorithm (see ISO 17575-3:2016, 8.5.3.7);
— Security (see ISO 17575-3:2016, 7.2).
With regard to the individual data sets and EFC attributes defined in ISO 17575-3, the test purposes
have been organized into the test suite groups, designated for the Front End and Back End respectively.
In addition to the test purposes, this document also provides proforma conformance test report
templates for both the Front End and Back End test purposes and an informative statement on the
usage of this document for the European electronic toll service (EETS).
For more information regarding the requirements against which the conformance is evaluated in this
document, refer to ISO 17575-3.
Testing of the following behaviours and functionalities is outside the scope of this document:
— dynamic behaviour, i.e. sequence of messages and triggering events that must be exchanged/happen
to fulfil certain charging scenarios;
— profiles and business logic built on top of particular pricing schemas;
— behaviour invalid of Front End and Back End, BI test purposes are not applicable for any test purpose
group (as ISO 17575-3 does not specify behaviour invalid).

Elektronische Gebührenerhebung - Konformitätsevaluierung von Geräten nach ISO 17575-3 - Teil 1: Struktur der Testfolge und Testabsichten (ISO 16410-1:2017)

Perception du télépéage - Évaluation de la conformité de l'équipement à l'ISO 17575-3 - Partie 1: Structure de la suite d'essais et objectifs des essais (ISO 16410-1:2017)

Les normes ISO 16410 ont pour domaine d'application la fourniture d'une série d'essais ayant pour but d'évaluer la conformité des comportements du système frontal et du système central par rapport aux exigences énumérées dans l'ISO 17575‑3. Le présent document contient la définition de tels essais sous forme de buts d'essais, donnant la liste des conditions initiales requises, des références et des étapes individuelles, d'une manière textuelle structurée. La Partie 2 de l'ISO 16410 contient les essais identiques écrits dans la version 3 de Notation des essais et des contrôles d'essais (TTCN v3).
Les buts d'essais définis dans le présent document reflètent les exigences structurelles et sémantiques exprimées dans l'ISO 17575‑3:
- Présence / absence d'éléments de données particuliers (voir ISO 17575‑3, paragraphe 8.5.5)
- Sémantique relative à divers éléments de données, comme par exemple:
- Activation de données de contexte et gestion de contextes multiples (voir ISO 17575‑3, paragraphe 8.3)
- Gestion des niveaux de priorité (voir ISO 17575‑3, paragraphes 8.5.2 à 8.5.4)
- Unicité des éléments de données importants (voir ISO 17575‑3, paragraphes 8.5.2 à 8.5.4)
- Définition correcte des objets imputés (voir ISO 17575‑3, paragraphe 8.5.4)
- Algorithme de calcul des redevances (voir ISO 17575‑3, paragraphe 8.5.3.7)
- Sécurité (voir ISO 17575‑3, paragraphe 7.2)
En ce qui concerne les éléments de données individuels et les attributs EFC définis dans l'ISO 17575‑3, les buts d'essais ont été organisés dans les groupes de suites d'essais désignés, respectivement, pour le système frontal et le système central.
Outre les buts d'essais, le présent document donne également des formulaires de rapports d'essais de conformité à la fois pour le système frontal et le système central, ainsi qu'une déclaration à caractère informatif sur l'utilisation du présent document pour le SET.
Pour en savoir davantage sur les exigences par rapport auxquelles la conformité est évaluée dans le présent document, voir l'ISO 17575‑3.
Les essais des fonctionnalités et comportements suivants ne fait pas partie du domaine d'application de l'ISO 16410-1:2017:
- comportement dynamique, c'est-à-dire séquence de messages et événements de déclenchement devant être échangés / pouvant parfois satisfaire certains scénarios d'imputation;
- profils et logique d'entreprise construite au-dessus de schémas de tarification particuliers;
- L'ISO 17575‑3 ne spécifiant aucun comportement invalide du système frontal et du système central, les buts d'essais BI (comportement invalide) ne s'appliquent à aucun groupe de buts d'essais.

Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme z ISO 17575-3 - 1. del: Zgradba preskuševalnega niza in namen preskušanja (ISO 16410-1:2017)

Skupina standardov ISO 16410 zagotavlja preskuševalni niz za ocenjevanje skladnosti obnašanj čelnega in zalednega
dela v zvezi z zahtevami iz standarda ISO 17575-3. Ta dokument vsebuje določitev takšnih preskusov v obliki namenov preskušanja in pri tem na strukturiran način v besedi navaja zahtevane začetne pogoje, reference in posamezne korake. Standard ISO 16410-2 vsebuje identične preskuse, zapisane v 3. različici zapisa preskušanja in krmilnih preskusov (TTCN v3).
Nameni preskušanja, ki so opredeljeni v tem dokumentu, odražajo strukturne in semantične zahteve, podane v standardu
ISO 17575-3:
– prisotnost/odsotnost posebnih podatkovnih elementov (glej ISO 17575-3:2016, 8.5.5);
– semantika, povezana z različnimi podatkovnimi elementi, npr.:
– aktivacija podatkov iz sobesedila in obravnava več sobesedil (glej ISO 17575-3:2016, 8.3);
– obravnava precedence in prednostnih ravni (glej ISO 17575-3:2016, 8.5.2 do 8.5.4);
– edinstvenost posebnih podatkovnih elementov (glej ISO 17575-3:2016, 8.5.2 do 8.5.4);
– pravilna opredelitev objektov zaračunavanja (glej ISO 17575-3:2016, 8.5.4);
– algoritem za izračun pristojbin (glej ISO 17575-3:2016, 8.5.3.7);
– varnost (glej ISO 17575-3:2016, 7.2).
Glede na posamezne nabore podatkov in atribute elektronskega pobiranja pristojbin (EFC), določene v standardu ISO 17575-3, so nameni preskušanja urejeni po skupinah preskuševalnih nizov, ki so zasnovani za čelni del ali za zaledni del.
Ta dokument poleg namenov preskušanja določa tudi predloge za poročila o proformnem preskušanju skladnosti za namene preskušanja čelnega in zalednega dela ter za informativne izjave o uporabi tega dokumenta za evropski sistem elektronskega cestninjenja (EETS).
Za več informacij glede zahtev, na podlagi katerih se vrednoti skladnost v tem dokumentu, glej standard ISO 17575-3.
Preskušanje obnašanj in funkcionalnosti v nadaljevanju ne spada na področje uporabe tega dokumenta:
– dinamično obnašanje, npr. zaporedje sporočil in sprožilnih dogodkov, ki se morajo izmenjati/zgoditi za uresničitev določenih scenarijev zaračunavanja;
– profili in poslovna logika, grajeni na posameznih cenovnih shemah;
– neveljavno obnašanje čelnega in zalednega dela, nameni preskušanja za neveljavna obnašanja se ne uporabljajo za nobeno skupino namenov preskušanj (ker standard ISO 17575-3 ne določa neveljavnega obnašanja).

General Information

Status
Published
Public Enquiry End Date
30-Jan-2017
Publication Date
06-Mar-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-Dec-2017
Due Date
26-Feb-2018
Completion Date
07-Mar-2018

RELATIONS

Buy Standard

Standard
SIST EN ISO 16410-1:2018
English language
172 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 16410-1:2018
01-april-2018
1DGRPHãþD
SIST-TS CEN ISO/TS 16410-1:2011

Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme z ISO 17575-3 -

1. del: Zgradba preskuševalnega niza in namen preskušanja (ISO 16410-1:2017)

Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 1:

Test suite structure and test purposes (ISO 16410-1:2017)
Elektronische Gebührenerhebung - Konformitätsevaluierung von Geräten nach ISO
17575-3 - Teil 1: Struktur der Testfolge und Testabsichten (ISO 16410-1:2017)

Perception du télépéage - Évaluation de la conformité de l'équipement à l'ISO 17575-3 -

Partie 1: Structure de la suite d'essais et objectifs des essais (ISO 16410-1:2017)

Ta slovenski standard je istoveten z: EN ISO 16410-1:2017
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST EN ISO 16410-1:2018 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 16410-1:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 16410-1:2018
EN ISO 16410-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2017
EUROPÄISCHE NORM
ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 16410-1:2011
English Version
Electronic fee collection - Evaluation of equipment for
conformity to ISO 17575-3 - Part 1: Test suite structure
and test purposes (ISO 16410-1:2017)

Perception du télépéage - Évaluation de la conformité Elektronische Gebührenerhebung -

de l'équipement à l'ISO 17575-3 - Partie 1: Structure de Konformitätsbeurteilung von Geräten nach ISO/TS

la suite d'essais et objectifs des essais (ISO 16410- 17575-3 - Teil 1: Struktur und Zweck des

1:2017) Prüfprogramms (ISO 16410-1:2017)
This European Standard was approved by CEN on 12 December 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16410-1:2017 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16410-1:2018
EN ISO 16410-1:2017 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 16410-1:2018
EN ISO 16410-1:2017 (E)
European foreword

This document (EN ISO 16410-1:2017) has been prepared by Technical Committee ISO/TC 204

“Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent

transport systems” the secretariat of which is held by NEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by June 2018 and conflicting national standards shall be

withdrawn at the latest by June 2018.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes CEN ISO/TS 16410-1:2011.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
Endorsement notice

The text of ISO 16410-1:2017 has been approved by CEN as EN ISO 16410-1:2017 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 16410-1:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 16410-1:2018
INTERNATIONAL ISO
STANDARD 16410-1
First edition
2017-11
Electronic fee collection — Evaluation
of equipment for conformity to ISO
17575-3 —
Part 1:
Test suite structure and test purposes
Perception du télépéage — Évaluation de la conformité de
l'équipement à l'ISO 17575-3 —
Partie 1: Structure de la suite d'essais et objectifs des essais
Reference number
ISO 16410-1:2017(E)
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of

the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ................................................................................................................................................................................................................................vi

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 2

3 Terms and definitions ..................................................................................................................................................................................... 2

4 Abbreviated terms .............................................................................................................................................................................................. 4

5 Test suite structure ............................................................................................................................................................................................ 5

5.1 Structure ....................................................................................................................................................................................................... 5

5.2 Reference to conformance test specifications .............................................................................................................. 6

5.3 Test purposes (TP) .............................................................................................................................................................................. 6

5.3.1 TP definition conventions ........................................................................................................................................ 6

5.3.2 TP naming conventions .............................................................................................................................................. 7

5.4 Conformance test report ................................................................................................................................................................ 8

Annex A (normative) Test purposes (TP) for Front End .................................................................................................................. 9

Annex B (normative) Test purposes (TP) for Back End .................................................................................................................96

Annex C (normative) Data structures ...........................................................................................................................................................133

Annex D (normative) PCTR for Front End ................................................................................................................................................154

Annex E (normative) PCTR for Back End ..................................................................................................................................................159

Bibliography .........................................................................................................................................................................................................................163

© ISO 2017 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following

URL: www.iso.org/iso/foreword.html.

The document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.

This first edition of ISO 16410-1 cancels and replaces the first edition of ISO/TS 16410-1:2011, which

has been technically revised.
The following changes have been made:

— this document has been converted from a Technical Specification to an International Standard;

— amendments have been made to reflect changes to the underlying base standards, especially

ISO 17575 (all parts);
— major changes have been made regarding:
— data element changes introduced by ISO 17575-1 and ISO 17575-3;
— new test purposes related to:
— protocol version handling;
— toll context partitions;
— fee calculation algorithm;
— rounding rules;
— alternative currency;
— test purposes related to the following have been removed:
— communications services;
iv © ISO 2017 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)

— rules with respect to support of context data which are no longer required by ISO 17575-3;

— the terms and definitions have been revised;

— editorial and formal corrections, as well as changes to improve readability, have been made.

© ISO 2017 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
Introduction

This document is part of a series of standards that supports interoperability of autonomous EFC-

systems. Autonomous systems use satellite positioning, often combined with additional sensor

technologies such as gyroscopes, odometers and accelerometers, to localize the vehicle and to find its

position on a map containing the charged geographic objects, such as charged roads or charged areas.

From the charged objects, the vehicle characteristics, the time of day and other data that are relevant

for describing road use, the tariff and ultimately, the road usage fee is determined.

Autonomous on-board equipment (OBE) operates without relying on dedicated road-side infrastructure

by employing wide-area technologies such as global navigation satellite systems (GNSS) and cellular

communications networks (CN). Therefore, autonomous systems may also be referred to as GNSS/CN

systems.

Within the series of EFC standards, this document defines tests for conformity evaluation of Front End

and Back End that comply with the requirements towards the context data specified in ISO 17575-3.

This document is based on
— ISO 17575-3, and
— the ISO 9646 series on conformance test methodology.
vi © ISO 2017 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 16410-1:2018
INTERNATIONAL STANDARD ISO 16410-1:2017(E)
Electronic fee collection — Evaluation of equipment for
conformity to ISO 17575-3 —
Part 1:
Test suite structure and test purposes
1 Scope

The ISO 16410 series provides a suite of tests in order to assess compliance of the Front End and Back

End behaviours in relation to the requirements in ISO 17575-3. This document contains the definition of

such tests in the form of test purposes, listing the required initial conditions, references and individual

steps in a structured textual manner. ISO 16410-2 contains the identical tests written in testing and

test control notation version 3 (TTCN v3).

The test purposes defined in this document reflect the structural and semantic requirements stated in

ISO 17575-3.
— Presence/absence of particular data elements (see ISO 17575-3:2016, 8.5.5);
— Semantics related to various data elements, e.g.:

— Activation of context data and handling multiple contexts (see ISO 17575-3:2016, 8.3);

— Handling the precedence and priority levels (see ISO 17575-3:2016, 8.5.2 to 8.5.4);

— Uniqueness of relevant data elements (see ISO 17575-3:2016, 8.5.2 to 8.5.4);
— Correct definition of the charge objects (see ISO 17575-3:2016, 8.5.4);
— Fee calculation algorithm (see ISO 17575-3:2016, 8.5.3.7);
— Security (see ISO 17575-3:2016, 7.2).

With regard to the individual data sets and EFC attributes defined in ISO 17575-3, the test purposes

have been organized into the test suite groups, designated for the Front End and Back End respectively.

In addition to the test purposes, this document also provides proforma conformance test report

templates for both the Front End and Back End test purposes and an informative statement on the

usage of this document for the European electronic toll service (EETS).

For more information regarding the requirements against which the conformance is evaluated in this

document, refer to ISO 17575-3.

Testing of the following behaviours and functionalities is outside the scope of this document:

— dynamic behaviour, i.e. sequence of messages and triggering events that must be exchanged/happen

to fulfil certain charging scenarios;
— profiles and business logic built on top of particular pricing schemas;

— behaviour invalid of Front End and Back End, BI test purposes are not applicable for any test purpose

group (as ISO 17575-3 does not specify behaviour invalid).
© ISO 2017 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 17575-1, Electronic fee collection — Application interface definition for autonomous systems — Part 1:

Charging

ISO 17575-3:2016, Electronic fee collection — Application interface definition for autonomous systems —

Part 3: Context data
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1
area charging
charging based on road usage within a given area
[SOURCE: ISO 17575-1:2016, 3.1]
3.2
attribute

addressable package of data consisting of a single data element or structured sequences of data

elements (3.9)
[SOURCE: ISO 17575-1:2016, 3.2]
3.3
authenticator
data, possibly encrypted, that is used for authentication
[SOURCE: EN 15509:2014, 3.3]
3.4
Back End
part of a back office system interfacing to one or more Front Ends (3.11)
[SOURCE: ISO 17575-1:2016, 3.4]
3.5
charge object
geographic or road-related object for the use of which a charge is applied
[SOURCE: ISO 17575-1:2016, 3.5]
3.6
charge report

information containing road usage and related information originated at the Front End (3.11)

[SOURCE: ISO 17575-1:2016, 3.6]
2 © ISO 2017 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
3.7
cordon
border line of an area
[SOURCE: ISO 17575-1:2016, 3.7]
3.8
cordon charging
charging for the crossing of a cordon (3.7)
[SOURCE: ISO 17575-1:2016, 3.8]
3.9
data element

coded information, which might itself consist of lower level information structures

[SOURCE: ISO 17575-1:2016, 3.9]
3.10
data set
logical set of data elements (3.9) with a semantic relation
[SOURCE: ISO 17575-3:2016, 3.10]
3.11
Front End

part of a tolling system consisting of an OBE (3.13) and possibly, a proxy (3.14) where road tolling

information and usage data are collected and processed for delivery to the Back End (3.4)

[SOURCE: ISO/TS 19299:2015, 3.17]
Note 1 to entry: The Front End comprises the OBE and an optional proxy.
3.12
layout
technical description of the location of tolled objects including their borders
[SOURCE: ISO 17575-3:2016, 3.12]
3.13
on-board equipment
OBE

all required equipment on-board a vehicle for performing required EFC functions and communication

services
[SOURCE: ISO 17575-3:2016, 3.13]
3.14
proxy

optional part of a Front End (3.11) that communicates with external equipment and processes the data

received into an agreed format to be delivered to the Back End (3.4)
[SOURCE: ISO 17575-1:2016, 3.13]
3.15
road section charging
tolling principle where the fee is due if predefined sections of roads are used
[SOURCE: ISO 17575-1:2016, 3.14]
© ISO 2017 – All rights reserved 3
---------------------- Page: 15 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
3.16
toll

charge, tax or duty levied in connection to using a vehicle in a toll domain (3.20)

[SOURCE: ISO/TS 19299:2015, 3.42]

Note 1 to entry: The definition is the generalization of the classic definition of a toll as a charge, a tax or a duty

for permission to pass a barrier or to proceed along a road, over a bridge, etc. The definition also includes fees

regarded as an (administrative) obligation, e.g. a tax or a duty.
3.17
tolled area
geographic area where a toll (3.16) is charged for road usage
[SOURCE: ISO 17575-3:2016, 3.17]
3.18
toll context

logical view as defined by attributes (3.2) and functions of the basic elements of a toll scheme (3.22)

consisting of a single basic tolling principle, a spatial distribution of the charge objects (3.5) and a single

behaviour of the related Front End (3.11)
[SOURCE: ISO 17575-1:2016, 3.17]
3.19
toll context data

information defined by the responsible toll charger necessary to establish the toll (3.16) due for using a

vehicle on a particular toll context (3.18) and to conclude the toll transaction
[SOURCE: ISO 12855:2015, 3.15]
3.20
toll domain
area or part of a road network where a certain toll regime (3.21) is applied
[SOURCE: ISO 17573:2010, 3.18]
3.21
toll regime

set of rules, including enforcement rules, governing the collection of toll (3.16) in a toll domain (3.20)

[SOURCE: ISO 17573:2010, 3.20]
3.22
toll scheme

organizational view of a toll regime (3.21), including the actors and their relationships

[SOURCE: ISO 17575-3:2016, 3.22]
4 Abbreviated terms
ADU Application data unit
ASN.1 Abstract syntax notation one
ATS Abstract test suite
BI Behaviour invalid
BV Behaviour valid (EN 15876-1)
4 © ISO 2017 – All rights reserved
---------------------- Page: 16 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
CCC Compliance check communication
CN Cellular network
DUT Device under test
EFC Electronic fee collection
GNSS Global navigation satellite systems
HMI Human machine interface
ID Identifier
IUT Implementation under test
OBE On-board equipment
PCTR Proforma conformance test report
PICS Protocol implementation conformance statements
TP Test purposes
TSS Test suite structure
TTCN Testing and test control notation
VAT Value added tax
5 Test suite structure
5.1 Structure
Table 1 shows the test suite structure (TSS).
Table 1 — Test suite structure
Group Type of IUT Behaviour
Procedural Back End Behaviour Valid
Behaviour Invalid not applicable
ADU Header Back End Behaviour Valid
Behaviour Invalid not applicable
ADU Body – Attribute general Back End Behaviour Valid
Behaviour Invalid not applicable
Toll Context Overview and Toll Back End Behaviour Valid
Context Partition Overview
Behaviour Invalid not applicable
Tariff Table and Currency Back End Behaviour Valid
Conversion Table
Behaviour Invalid not applicable
Tariff Class Definition Back End Behaviour Valid
Behaviour Invalid not applicable
Local Vehicle Class Definition Back End Behaviour Valid
Behaviour Invalid not applicable
Time Class Definition Back End Behaviour Valid
Behaviour Invalid not applicable
© ISO 2017 – All rights reserved 5
---------------------- Page: 17 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
Table 1 (continued)
Group Type of IUT Behaviour
User Class Definition Back End Behaviour Valid
Behaviour Invalid not applicable
Toll Context Layout Back End Behaviour Valid
Behaviour Invalid not applicable
Toll Context Layout for Back End Behaviour Valid
Section Pricing
Behaviour Invalid not applicable
Toll Context Layout for Area Back End Behaviour Valid
Pricing
Behaviour Invalid not applicable
Toll Context Layout for Back End Behaviour Valid
Cordon Pricing
Behaviour Invalid not applicable
Context Handling Front End Behaviour Valid
Behaviour Invalid not applicable
Charge Report Front End Behaviour Valid
Behaviour Invalid not applicable

Front End related test purposes uses Charge Report message for validation which is specified in

ISO 17575-1. As a precondition to run those test purposes, compliance to ISO 17575-1 shall be validated.

5.2 Reference to conformance test specifications

This document takes into account already defined test purposes for conformance to the base standards

by referencing them, so that

a) for test purposes that are identical to those defined in this document or the base standards

conformance test cases, a direct reference is reported; for the reader’s convenience, the title or a

verbal description of the referenced test purpose is given, together with the reference,

b) for test purposes that are derived from those defined in the base standards conformance test

cases, a direct reference is reported, plus an indication on how the referred test purpose has to be

modified for the profile conformance testing,

c) for test purposes that are specific to ISO 17575-3, a complete description is given, and

d) an indication on whether a test purpose is identical, derived or specific is given in each test

purpose.
5.3 Test purposes (TP)
5.3.1 TP definition conventions

The TPs are defined following the rules shown in Table 2. All test purposes are defined in Annex A and

Annex B, including the special notation and symbol conventions that shall be used. The data structures

that shall be used are specified in Annex C and defined in ISO 17575-1 and ISO 17575-3.

Table 2 — TP definition rules
TP ID according to the TP naming Title
conventions
Reference
TP origin
Initial condition
Stimulus and expected behaviour
6 © ISO 2017 – All rights reserved
---------------------- Page: 18 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
Table 2 (continued)
TP ID The TP ID is a unique identifier. It shall be specified according to the
TP naming conventions defined in 5.3.2.
Title Short description of test purpose objective.
Reference The reference should contain the references of the subject to be
validated by the actual TP (specification reference, clause, paragraph)
or the reference to the standard document defining the TP.

TP origin Indicates if the TP is identical to a TP defined in another test standard,

derived from a TP defined in another test standard or specific for this
standard profile.

Initial condition The condition defined in which initial state the IUT has to be to apply

the actual TP.

Stimulus and expected Definition of the events the tester performs and the events that are

behaviour expected from the IUT to conform to the base specification.
5.3.2 TP naming conventions

Each TP is given a unique identification. This unique identification is built up to contain the following

string of information:
TP____
TP : to indicate that it is a test purpose;
: which group the TP belongs to;
: type of IUT (i.e. FE or BE);

X : type of testing (i.e. Behaviour Valid tests – BV or Behaviour Invalid tests – BI);

: sequential TP number (01-99).
The naming conventions are as described in Table 3.
© ISO 2017 – All rights reserved 7
---------------------- Page: 19 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
Table 3 — TP naming convention
Identifier:
TP///
-

applicable for BE PRO Procedural
applicable for BE ADUH ADU Header
applicable for BE ADUB ADU Body – EFC Attribute general
applicable for BE TC Toll Context Overview and Toll Context Partition Overview
applicable for BE TT Tariff Table and Currency Conversion Table
applicable for BE TACD Tariff Class Definition
applicable for BE LVCD Local Vehicle Class Definition
applicable for BE TICD Time Class Definition
applicable for BE USCD User Class Definition
applicable for BE TCL Toll Context Layout
applicable for BE TCL-S Toll Context Layout for Section Pricing
applicable for BE TCL-A Toll Context Layout for Area Pricing
applicable for BE TCL-C Toll Context Layout for Cordon Pricing
applicable for FE CH Context Handling
applicable for FE CR Charge Report
= type of IUT FE Front End
BE Back End
x = type of testing BV Behaviour Valid Tests
BI Behaviour Invalid Tests
= sequential number (01–99) Test Purpose Number
5.4 Conformance test report

The supplier of the Front End and Back End, respectively, is responsible for providing a conformance

test report.

The supplier of the Front End shall complete the proforma conformance test report (PCTR) for Front

End as defined in Annex D (notably Tables D.1 to D.4).

The supplier of the Back End shall complete the proforma conformance test report (PCTR) for Back End

as defined in Annex E (notably Tables E.1 to E.4).
8 © ISO 2017 – All rights reserved
---------------------- Page: 20 ----------------------
SIST EN ISO 16410-1:2018
ISO 16410-1:2017(E)
Annex A
(normative)
Test purposes (TP) for Front End
A.1 General
This annex contains the test pu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.