SIST EN 12312-7:2005/kprA1:2008

Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment

Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 7: Luftfahrzeug-Schleppgerät

Matériels au sol pour aéronefs - Exigences particulières - Partie 7 : Matériels de déplacement des aéronefs

Podporna oprema na tleh za letalski promet - Posebne zahteve - 7. del: Oprema za premikanje letal

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Nov-2008
• ICS: 49.100 - Ground service and maintenance equipment
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 09-Oct-2019
• Due Date: 14-Oct-2019
• Completion Date: 09-Oct-2019
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 12312-7:2005/prA1 - Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment

Relations

• Consolidated By: SIST EN 12312-7:2005+A1:2009 - Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment
• Effective Date: 01-Jul-2009
• Revised: SIST EN 12312-7:2005 - Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment
• Effective Date: 01-Nov-2008

Overview

EN 12312-7:2005/prA1 is a draft amendment to the CEN European standard for aircraft ground support equipment - specifically Part 7 covering aircraft movement equipment. Prepared by CEN/TC 274 (secretariat: DIN), this amendment updates normative references, verification links and the relationship to EU machinery legislation. The document is distributed for review and is intended to be incorporated into the existing EN 12312-7:2005 when accepted.

Key editorial points in the amendment include modifications to the foreword and clauses to clarify use with related standards and to add informative annex material addressing EU directive conformity.

Key Topics

• Reference alignment: The amendment explicitly states that Part 7 is intended to be used in conjunction with the EN 1915 series (EN 1915-1, EN 1915-2, EN 1915-3 and EN 1915-4). These references cover general requirements and measurement methods relevant to vehicles, vibration and noise.

• Conformity and verification: Clause 5.1.1 is modified so that aircraft movement equipment shall conform to the relevant requirements of EN 1915-1, EN 1915-2, EN 1915-3 and EN 1915-4 unless otherwise specified. Clause 7 is amended to point to verification details in EN 1915-3 and EN 1915-4 where relevant.

• Regulatory linkage (Annex ZB): An informative Annex ZB has been added to describe the relationship between this standard and the Essential Requirements of EU Directive 2006/42/EC (machinery). The annex explains that compliance with the normative clauses (with specified exceptions) can confer a presumption of conformity with the Directive when the standard is formally cited.

• Bibliography update: The amendment includes a change to the bibliography entries related to EN 1915-3 and EN 1915-4.

Applications

This amendment and the resulting standard are directly relevant to:

• Manufacturers and suppliers of aircraft movement equipment (tugs, tractors, tow bars and related devices).
• Airport ground operations and maintenance teams responsible for safe aircraft handling.
• Test laboratories and conformity assessment bodies conducting verification against EN 1915 series requirements (vibration and noise measurement methods).
• Procurement and regulatory compliance staff ensuring equipment meets CEN standards and EU machinery directives.

Practical benefits include clearer cross-references for verification, strengthened alignment with vibration and noise measurement methods, and defined pathways to demonstrate conformity with EU requirements.

Related Standards

• EN 12312-7:2005 (base document, Part 7)
• EN 1915-1 / EN 1915-2 (General requirements for GSE)
• EN 1915-3 (Vibration measurement methods and reduction)
• EN 1915-4 (Noise measurement methods and reduction)

Note: This draft amendment is provided for review and comment and is not a finalized European Standard. Users should consult the official CEN notifications and national standard bodies for the final implemented text and citation status.

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2008
Podporna oprema na tleh za letalski promet - Posebne zahteve - 7. del: Oprema za
premikanje letal
Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement
equipment
Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 7: Luftfahrzeug-Schleppgerät
Matériels au sol pour aéronefs - Exigences particulières - Partie 7 : Matériels de
déplacement des aéronefs
Ta slovenski standard je istoveten z: EN 12312-7:2005/prA1
ICS:
49.100 Oprema za servis in Ground service and
vzdrževanje na tleh maintenance equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 12312-7:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
August 2008
ICS 49.100
English Version
Aircraft ground support equipment - Specific requirements - Part
7: Air-craft movement equipment
Matériels au sol pour aéronefs - Exigences particulières - Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 7:
Partie 7 : Matériels de déplacement des aéronefs Luftfahrzeug-Schleppgerät
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 274.
This draft amendment A1, if approved, will modify the European Standard EN 12312-7:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12312-7:2005/prA1:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Modification to the Foreword .4
2 Modification to Clause 1 .4
3 Modifications to Clause 2 .4
4 Modification to 5.1.1 .
...