oSIST prEN 50059:2011

Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials

This work item will specify the requirements for hand-held or hand-operated electrostatic spraying equipment for non-ignitable coating materials which do not generate an explosive atmosphere inside the spraying area.
It will deal with all hazards significant for the electrostatic spraying of non-ignitable coating materials, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer.
It will not apply to:
- cleaning of spraying areas, see instruction manual of the spraying booth;
- fire prevention and protection [for instance fire hazards due to other sources.

Elektrostatische Handsprüheinrichtungen - Sicherheitsanforderungen - Handsprüheinrichtungen für nichtentzündbare Beschichtungsstoffe

Equipement manuel de projection électrostatique - Exigences de sécurité - Equipement manuel de projection de revêtement ininflammable

Ročna oprema za elektrostatično brizganje - Varnostne zahteve - Ročna oprema za brizganje nevnetljivih premazov

General Information

• Status: Not Published
• Public Enquiry End Date: 24-Sep-2011
• ICS: 87.100 - Paint coating equipment
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 14-Jan-2020
• Due Date: 19-Jan-2020
• Completion Date: 14-Jan-2020
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Ref Project: prEN 50059:2011 - Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials

Relations

• Replaces: SIST EN 50059:2001 - Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing
• Effective Date: 13-May-2010
• Revises: SIST EN 50059:2001 - Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing
• Effective Date: 28-Jan-2023
• Revised: SIST EN 50059:2001 - Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing
• Effective Date: 07-Jun-2022
• Revised: SIST EN 50059:2001 - Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing
• Effective Date: 06-May-2014

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 50059:2011
01-september-2011
1DGRPHãþD
SIST EN 50059:2001
5RþQDRSUHPD]DHOHNWURVWDWLþQREUL]JDQMH9DUQRVWQH]DKWHYH5RþQDRSUHPD]D
EUL]JDQMHQHYQHWOMLYLKSUHPD]RY
Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying
equipment for non-ignitable coating materials
Elektrostatische Handsprüheinrichtungen - Sicherheitsanforderungen -
Handsprüheinrichtungen für nichtentzündbare Beschichtungsstoffe
Equipement manuel de projection électrostatique - Exigences de sécurité - Equipement
manuel de projection de revêtement ininflammable
Ta slovenski standard je istoveten z: prEN 50059:2011
ICS:
87.100 Oprema za nanašanje Paint coating equipment
premazov
oSIST prEN 50059:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50059:2011

---------------------- Page: 2 ----------------------
oSIST prEN 50059:2011
 DRAFT
EUROPEAN STANDARD
prEN 50059

NORME EUROPÉENNE
May 2011
EUROPÄISCHE NORM

ICS 87.100 Will supersede EN 50059:1990


English version


Electrostatic hand-held spraying equipment -
Safety requirements -
Hand-held spraying equipment for non-ignitable coating materials


Equipement manuel de projection Elektrostatische Handsprüheinrichtungen -
électrostatique - Exigences de sécurité - Sicherheitsanforderungen -
Equipement manuel de projection Handsprüheinrichtungen für
de revêtement ininflammable nichtentzündbare Beschichtungsstoffe



This draft European Standard is submitted to CENELEC members for CENELEC enquiry.
Deadline for CENELEC: 2011-10-28.

It has been drawn up by CLC/TC 204.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national
standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to
change without notice and shall not be referred to as a European Standard.


CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Project: 22521 Ref. No. prEN 50059:2011 E

---------------------- Page: 3 ----------------------
oSIST prEN 50059:2011
prEN 50059:2011 - 2 -
1 Foreword
2 This draft European Standard was prepared by the Technical Committee CENELEC TC 204, Safety of
3 electrostatic painting and finishing equipment. It is submitted to the CENELEC enquiry.
4 This document will supersede EN 50059:1990.
5 The significant changes with respect to EN 50059:1990 are as listed below:
6 – modification of the title of the standard;
7 – extension of introduction;
8 – extension of normative references;
9 – extension of terms and definitions;
10 – new arrangement and extension of the requirements for hand-held spraying equipment for non-ignitable
11 liquid coating materials;
12 – definition of requirements for safety functions;
13 – new arrangement and extension of tests for hand-held spraying equipment for non-ignitable liquid coating
14 materials;
15 – new arrangement and extension of the information for use;
16 – definition of requirements for repeated tests;
17 – introduction of the normative Annex A "Test of the transferred charge using a shunt and an oscilloscope“;
18 – introduction of the informative Annex B "Ignitability of water-based paints";
19 – introduction of the informative Annex ZZ "Coverage of Essential Requirements of EC directives.
20
21 This draft European Standard has been prepared under a mandate given to CENELEC by the European
22 Commission and the European Free Trade Association and covers essential requirements of EC Directive
...