SIST EN 61499-4:2006

Function blocks -- Part 4: Rules for compliance profiles

This part of IEC 61499 defines rules for the development of compliance profiles which specify the features of IEC 61499-1 and 61499-2 to be implemented in order to promote the following attributes of IEC 61499-based systems, devices and software tools: - interoperability of devices from multiple suppliers; - portability of software between software tools of multiple suppliers; and - configurability of devices from multiple vendors by software tools of multiple suppliers.

Funktionsbausteine -- Teil 4: Regeln für normgerechte Profile

Blocs fonctionnels -- Partie 4: Règles pour la conformité des profils

Defines rules for the development of compliance profiles which specify the features of EN 61499-1 and 61499-2 to be implemented in order to promote the following attributes of EN 61499-based systems, devices and software tools:

Funkcijski bloki – 4. del: Pravila za ustreznostne profile (IEC 61499-4:2005)

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2006
• Withdrawal Date: 08-Mar-2016
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 07-Mar-2016
• Due Date: 30-Mar-2016
• Completion Date: 09-Mar-2016
• Ref Project: EN 61499-4:2006 - Function blocks - Part 4: Rules for compliance profiles

Relations

• Replaced By: SIST EN 61499-4:2013 - Function blocks - Part 4: Rules for compliance profiles (IEC 61499-4:2013)
• Effective Date: 29-Jan-2023
• Revised: SIST EN 61499-4:2013 - Function blocks - Part 4: Rules for compliance profiles (IEC 61499-4:2013)
• Effective Date: 06-May-2014
• Replaced By: SIST EN 61499-4:2013 - Function blocks - Part 4: Rules for compliance profiles (IEC 61499-4:2013)
• Effective Date: 01-Jul-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61499-4:2006
01-julij-2006
Funkcijski bloki – 4. del: Pravila za ustreznostne profile (IEC 61499-4:2005)
Function blocks - Part 4: Rules for compliance profiles
Funktionsbausteine - Teil 4: Regeln für normgerechte Profile
Blocs fonctionnels - Partie 4: Règles pour la conformité des profils
Ta slovenski standard je istoveten z: EN 61499-4:2006
ICS:
25.040.40
SIST EN 61499-4:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61499-4

NORME EUROPÉENNE
April 2006
EUROPÄISCHE NORM

ICS 25.040.40


English version


Function blocks
Part 4: Rules for compliance profiles
(IEC 61499-4:2005)


Blocs fonctionnels Funktionsbausteine
Partie 4: Règles pour la conformité Teil 4: Regeln für normgerechte Profile
des profils (IEC 61499-4:2005)
(CEI 61499-4:2005)




This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61499-4:2006 E

---------------------- Page: 2 ----------------------

EN 61499-4:2006 - 2 -
Foreword
The text of the International Standard IEC 61499-4:2005, prepared by IEC TC 65, Industrial-process
measurement and control, was submitted to the formal vote and was approved by CENELEC as
EN 61499-4 on 2006-02-01 without any modification.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61499-4:2005 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61499-4:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61499-1 - Function blocks EN 61499-1 2005
Part 1: Architecture

1) 2)
IEC 61499-2 - Part 2: Software tools requirements EN 61499-2 2005

1) 1)
ISO/IEC DIR-2, - ISO/IEC Directives CEN/CENELEC -
3)
mod. Part 2: Rules for the structure and IR 3
drafting of International Standards


1)
Undated reference.
2)
Valid edition at date of issue.
3)
CEN/CENELEC Internal Regulations – Part 3: Rules for the structure and drafting of CEN/CENELEC publications

---------------------- Page: 4 ----------------------

INTERNATIONAL IEC


STANDARD 61499-4





First edition
2005-08


Function blocks –
Part 4:
Rules for compliance profiles

 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale K
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 5 ----------------------

– 2 – 61499-4  IEC:2005(E)
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Terms and definitions .6
4 Contents of compliance profiles.6
4.1 Structure of compliance profiles .6
4.2 General provisions of a compliance profile .7
4.2.1 Scope.7
4.2.2 References to normative documents.7
4.2.3 Terms and definitions .7
4.3 Portability provisions .8
4.4 Interoperability provisions.8
4.5 Configurability provisions .8
4.6 Test requirements .8
4.7 Annexes .8

Annex A (informative)  Example compliance profile.9
Annex B (informative)  Example device configurability classes.10

---------------------- Page: 6 ----------------------

61499-4  IEC:2005(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FUNCTION BLOCKS –

Part 4: Rules for compliance profiles


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61499-4 has been prepared by IEC technical committee 65:
Industrial-process measurement and control.
This standard cancels and replaces IEC/PAS 61499-4 published in 2002.
This first edition constitutes a technical revision.
The text of this standard is based on the following documents:
CDV Report on voting
65/349/CDV 65/363/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 7 ----------------------

– 4 – 61499-4  IEC:2005(E)
IEC 61499 consists of the following parts, under the general title Function blocks:
Part 1: Architecture
Part 2: Software tool requirements
Part 3: Tutorial information
Part 4: Rules for compliance profiles
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual edition of this standard may be is
...