Glass in building - Basic alumino silicate glass products - Part 2: Evaluation of conformity/Product standard

This European Standard covers the evaluation of conformity and the factory production control of basic alumino silicate glass products for use in buildings.
Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

Glas im Bauwesen - Basiserzeugnisse aus Alumo-Silicatglas - Teil 2: Konformitätsbewertung/Produktnorm

Verre dans la construction - Produits de base verre alumino silicaté - Partie 2 : Evaluation de la conformité/Norme de produit

La présente Norme européenne couvre l'évaluation de la conformité et le contrôle de la production en usine pour les produits verriers alumino-silicatés de base en usage dans la construction.
NOTE   Pour les produits verriers équipés d'un câblage ou de branchements électriques pour les besoins d'alarme ou de chauffage par exemple, d’autres directives telles que la Directive sur les Courants Faibles peuvent s’appliquer.

Steklo v gradbeništvu - Osnovni izdelki iz aluminij-silikatnega stekla - 2. del: Ovrednotenje skladnosti/standard za izdelek

General Information

Status
Not Published
Public Enquiry End Date
30-Aug-2007
Withdrawal Date
17-Apr-2011
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
18-Apr-2011
Due Date
23-Apr-2011
Completion Date
18-Apr-2011

Buy Standard

Draft
prEN 15681-2:2007
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2007
Steklo v gradbeništvu - Osnovni izdelki iz aluminij-silikatnega stekla - 2. del:
Ovrednotenje skladnosti/standard za izdelek
Glass in building - Basic alumino silicate glass products - Part 2: Evaluation of
conformity/Product standard
Glas im Bauwesen - Basiserzeugnisse aus Alumo-Silicatglas - Teil 2:
Konformitätsbewertung/Produktnorm
Verre dans la construction - Produits de base verre alumino silicaté - Partie 2 :
Evaluation de la conformité/Norme de produit
Ta slovenski standard je istoveten z: prEN 15681-2
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2007
ICS 81.040.20
English Version
Glass in building - Basic alumino silicate glass products - Part 2:
Evaluation of conformity/Product standard
Glas im Bauwesen - Basiserzeugnisse aus Alumo-
Silicatglas - Teil 2: Konformitätsbewertung/Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 129.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15681-2:2007: E
worldwide for CEN national Members.

Contents Page
Foreword. 4
Scope . 5
1 Normative references . 5
2 Terms and definitions. 6
3 Requirements . 6
3.1 Conformity with the definition of basic alumino silicate glass products . 6
3.2 Determination of the characteristic's performances. 6
3.2.1 Characteristics of basic alumino silicate glasses . 6
3.2.2 Characteristics of basic alumino silicate glass products. 7
3.3 Durability. 9
3.4 Characteristics other than listed in 4.2. 10
3.5 Dangerous substances. 10
4 Evaluation of conformity. 10
4.1 General. 10
4.2 Initial type testing of the product (see 5.1, 2). 10
4.2.1 General. 10
4.2.2 Initial type testing if the product belongs to the group basic alumino silicate
glasses, clear or tinted . 12
4.2.3 Initial type testing of characteristic's performances. 12
4.3 Factory production control and inspection of samples in accordance with a
prescribed test plan (see 5.1, 1a) . 12
4.4 Initial inspection of factory and of factory production control (see 5.1, 1b) . 13
4.5 Continuous surveillance and assessment of the factory production control (5.1,
1c) . 13
5 Marking and labelling . 14
5.1 General. 14
5.2 Product marking. 14
5.3 Product characteristics . 14
5.4 “Characteristics/performance identification paper” . 14
Annex A (normative) Factory Production Control . 15
A.1 Factory Production Control Requirements . 15
A.1.1 General. 15
A.1.2 Organisation . 15
A.1.3 Control system . 15
A.2 Marking . 16
A.3 Inspection and testing tables of basic alumino silicate glass products production. 17
A.3.1 Information to the tables A.1 to A3 . 17
A.3.2 Use of proxy testing. 17
Annex B (informative) Provisions for voluntary third party(ies). 21
B.1 General. 21
B.2 Voluntary tasks for third parties. 21
B.3 Marking and labelling . 21
Annex ZA (informative) Clauses of this European Standard addressing the provisions of
EU Construction Products Directives. 22
ZA.1 Scope and relevant characteristics. 22
ZA.2 Procedure(s) for the attestation of conformity of basic alumino silicate glass
products. 24
ZA.2.1 System(s) of attestation of conformity . 24
ZA.2.2 EC Certificate and Declaration of conformity . 26
ZA.3 CE marking and labelling . 28
Bibliography . 30

Foreword
This document (prEN 15681-2:2007) has been prepared by Technical Committee CEN/TC 129 “Glass
in building”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
Scope
This European Standard covers the evaluation of conformity and the factory production control of
basic alumino silicate glass products for use in buildings.

Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives,
e.g. Low Voltage Directive, may apply.
1 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

EN 356, Glass in Building - Security glazing - Testing and classification of resistance against manual
attack
EN 410, Glass in Building - Determination of luminous and solar characteristics of glazing
EN 673, Glass in Building - Determination of thermal transmittance (U-value) – Calculation method
EN 1063, Glass in Building - Security glazing – Testing and classification of resistance against bullet
attack
EN 12600, Glass in Building - Pendulum test - Impact test method and classification for flat glass
EN 12758, Glass in Building - Glazing and airborne sound insulation – Product descriptions and
determination of properties
EN 12898, Glass in Building - Determination of the emissivity
prEN 13474, Glass in building – Design of glass panes
EN 13501-1, Fire classification of construction products and building elements – Part 1: Classification
using test data from fire reaction to fire tests
EN 13501-2, Fire classification of construction products and building elements - Part 2: Classification
using data from fire resistance tests, excluding ventilation services
EN 13501-5, Fire classification of construction products and building elements – Part 5: Classification
using data from fire exposure roof tests
EN 13541, Glass in Building - Security glazing - Testing and classification of resistance against
explosion pressure
prEN 15681-1, Glass in Building – Basic alumino silicate glass products – Part 1: Definitions and
general physical and mechanical properties
2 Terms and definitions
For the purposes of this document, the terms and definitions given in prEN BAluS-1 and the following
apply.
3.1
initial type testing
determination of the performance of a product (characteristic, durability), on the basis of either actual
tests or other procedures (such as conventional, standardised, tabulated or general accepted values;
standardised or recognised calculation methods; test reports when made available), in accordance
with this document that demonstrates compliance with this document.
3.2
test report
document that covers the results of tests undertaken on a representative sample of the product from
production or on a prototype design of the product.
3.3
product description
document that details the relevant parameters, e.g. process conditions, structure, etc., for defining a
product that complies with the standard. It includes specific reference(s) to characteristics that are
modified by the production process.
3.4
significant change
variation in performance beyond the permitted tolerance for the characteristic.
3 Requirements
3.1 Conformity with the definition of basic alumino silicate glass products
Products shall conform to the definition and fulfil the requirements of basic alumino silicate glass
products as defined in prEN 15681-1.
3.2 Determination of the characteristic's performances
3.2.1 Characteristics of basic alumino silicate glasses
Basic alumino silicate glass products are made in accordance with prEN 15681-1. The characteristics
listed in table 1, concern generally accepted values, calculated values or measured values.
Table 1 — Necessary information on characteristics of basic alumino silicate glasses
Characteristic Symbol Unit
General accepted values:
- density ρ kg/m³
- hardness HK GPa
0,1/2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.