SIST EN 14978:2016/FprA1:2021

Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods

This European Standard specifies characteristics, requirements and test methods for laminate floor coverings with acrylic based surface layer, electron beam cured as defined in 3.1 and 3.2.
It includes a classification system based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging.
Laminate floor coverings are considered for domestic and commercial levels of use, e.g. for use in domestic kitchens. This standard does not specify requirements related to areas that are subject to frequent wetting, such as bathrooms, laundry rooms or saunas.

Laminatböden - Elemente mit einer elektronenstrahlgehärteten Deckschicht auf Acryl-Basis - Spezifikationen, Anforderungen und Prüfverfahren

Der letzte Absatz des Anwendungsbereichs
"Für Laminatböden werden die Anwendungsgebiete "Wohnen" und "Gewerblich" berücksichtigt, z. B. für die Verwendung in Küchen im Wohnbereich. Diese Norm legt keine Anforderungen für Bereiche fest, die regelmäßig Nässe ausgesetzt sind wie etwa Badezimmer, Hauswirtschaftsräume oder Saunen"
wird ersetzt durch
"Laminatböden sind im Allgemeinen zur schwimmenden Verlegungen in den Anwendungsgebieten "Wohnen" und "Gewerblich" bestimmt, einschließlich einer Verwendung in Küchen im Wohnbereich. Dieses Dokument legt keine Anforderungen für die Verwendung in Bereichen fest, die regelmäßig Nässe ausgesetzt sind wie etwa Badezimmer, Hauswirtschaftsräume oder Saunen. Im Allgemeinen können Laminatböden in diesen Bereichen nur verwendet werden, wenn dies durch den Hersteller erklärt wird und unter den in den Installationsrichtlinien des Herstellers beschriebenen Bedingungen."

Revêtements de sol stratifiés - Éléments à parement à base acrylique traités par des faisceaux d'électrons - Spécifications, exigences et méthodes d'essai

Laminatne talne obloge - Elementi z vrhnjo plastjo iz akrila, polimeriziranega z elektronskim žarkom - Specifikacije, zahteve in preskusne metode

General Information

• Status: Not Published
• Public Enquiry End Date: 02-Aug-2020
• ICS: 97.150 - Floor coverings
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 05-May-2021
• Due Date: 23-Jun-2021
• Completion Date: 05-May-2021
• Ref Project: EN 14978:2016/FprA1 - Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods

Relations

• Consolidated By: SIST EN 14978:2016+A1:2021 - Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 14978:2016+A1:2021 - Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
• Effective Date: 19-Jan-2023
• Amends: SIST EN 14978:2016 - Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
• Effective Date: 01-Jul-2020
• Consolidated By: SIST EN 14978:2016+A1:2021 - Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
• Effective Date: 30-Jun-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14978:2016/oprA1:2020
01-julij-2020
Laminatne talne obloge - Elementi z vrhnjo plastjo iz akrila, polimeriziranega z
elektronskim žarkom - Specifikacije, zahteve in preskusne metode
Laminate floor coverings - Elements with acrylic based surface layer, electron beam
cured - Specifications, requirements and test methods
Laminatböden - Elemente mit einer elektronenstrahlgehärteten Deckschicht auf Acryl-
Basis - Spezifikationen, Anforderungen und Prüfverfahren
Revêtements de sol stratifiés - Éléments à parement à base acrylique traités par des
faisceaux d'électrons - Spécifications, exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 14978:2016/prA1
ICS:
97.150 Talne obloge Floor coverings
SIST EN 14978:2016/oprA1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14978:2016/oprA1:2020

---------------------- Page: 2 ----------------------
SIST EN 14978:2016/oprA1:2020


DRAFT
EUROPEAN STANDARD
EN 14978:2016
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
July 2020
ICS 97.150
English Version

Laminate floor coverings - Elements with acrylic based
surface layer, electron beam cured - Specifications,
requirements and test methods
Revêtements de sol stratifiés - Éléments à parement à Laminatböden - Elemente mit einer
base acrylique traités par des faisceaux d'électrons - elektronenstrahlgehärteten Deckschicht auf Acryl-
Spécifications, exigences et méthodes d'essai Basis - Spezifikationen, Anforderungen und
Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 134.

This draft amendment A1, if approved, will modify the European Standard EN 14978:2016. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14978:2016/prA1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 14978:2016/oprA1:2020
EN 14978:2016/prA1:2020 (E)
Contents Page
European foreword . 3
1 Modification to Clause 1, Scope . 4
2 Modification to term 3.3, substrate . 4
3 Modification to 5.3, Table 1 . 5

2

---------------------- Page: 4 ----------------------
SIST EN 14978:2016/oprA1:2020
EN 14978:2016/prA1:2020 (E)
European foreword
This document (EN 14978:2016/prA1:2020) has been prepared by Technical Committee CEN/TC 134
“Resilient, textile and laminate floor covering”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 14978:2016.
In comparison with EN 14
...