oSIST prEN 15287-1:2021
(Main)Chimneys - Design, installation and commissioning - Part 1: Chimneys and connecting flue pipes for non-room sealed combustion appliances
Chimneys - Design, installation and commissioning - Part 1: Chimneys and connecting flue pipes for non-room sealed combustion appliances
This European Standard describes the method of specifying the design, installation criteria for system chimneys, construction of custom built chimneys, and the relining of existing chimneys. It also gives information on commissioning of chimneys.
This European Standard also deals with connecting flue pipes.
This European Standard does not apply to freestanding chimneys covered by EN 13084-1.
This European Standard excludes chimneys designated H (high positive pressure chimneys) and chimneys for room-sealed heating appliances.
For the purpose of this European Standard the term "installation" includes construction.
Abgasanlagen - Planung, Montage und Abnahme - Teil 1: Senkrechte Teile von Abgasanlagen und Verbindungsstücke für raumluftabhängige Verbrennungseinrichtungen
Dieses Dokument beschreibt das Verfahren zur Festlegung der Planungs-, Montage- und Kennzeichnungskriterien für System-Abgasanlagen, Montage-Abgasanlagen und die Sanierung bestehender senkrechter Teile von Abgasanlagen und Verbindungsstücke für raumluftabhängige Verbrennungseinrichtungen sowie die Verwendung von Produkten für Abgasanlagen. Sie enthält auch Angaben zur Endkontrolle einer eingebauten Abgasanlage.
Dieses Dokument gilt für senkrechte Teile von Abgasanlagen, die folgenden Randbedingungen genügen:
- der Abstand zwischen den Abstützungen überschreitet 4 m nicht;
- der Abstand zur letzten Abstützung überschreitet 3 m nicht;
- die freistehende Höhe über der obersten Abstützung beträgt bei Abgasanlagen mit rechteckigem Querschnitt höchstens das Fünffache der kleinsten Außenabmessung.
Die Verfahren in diesem Teil dieses Dokuments gelten für senkrechte Teile von Abgasanlagen und Verbindungsstücke für raumluftabhängige Verbrennungseinrichtungen. Die Verfahren in Teil 2 dieses Dokuments gelten für senkrechte Teile von Abgasanlagen und Verbindungsstücke für raumluftunabhängige Verbrennungseinrichtungen.
Conduits de fumée - Conception, installation et mise en oeuvre - Partie 1: Conduits de fumée et conduits de raccordement pour appareils à combustion qui dépendent de l’air dans la pièce
Le présent document décrit la méthode permettant de spécifier les critères de conception, d’installation et d’étiquetage relatifs aux systèmes de conduits, aux conduits de fumée construits sur site, au tubage des conduits de fumée existants et aux conduits de raccordement pour appareils de combustion qui prélèvent l’air comburant dans la pièce, ainsi qu’à l’utilisation de composants de conduits de fumée. Il fournit également des informations pour la mise en service d’un conduit de fumée venant d’être installé.
Le présent document s’applique aux conduits de fumée soumis aux conditions contraignantes suivantes :
- la distance entre supports ne doit pas dépasser 4 m ;
- la distance au-dessus de la dernière fixation à la structure ne doit pas dépasser 3 m ;
- la hauteur libre au-dessus de la fixation la plus haute des supports à la structure pour les conduits de fumée avec section rectangulaire n’est pas supérieure à cinq fois la plus petite dimension extérieure.
Les méthodes mentionnées dans cette partie du présent document sont applicables aux conduits de fumée et conduits de raccordement pour appareils qui prélèvent l’air comburant dans la pièce. Les méthodes mentionnées dans la Partie 2 du présent document sont applicables aux conduits de fumée et aux conduits de raccordement pour appareils de combustion à circuit étanche.
Dimniki - Projektiranje, vgradnja in pregled - 1. del: Dimniki in povezovalni dimovodi za ogrevalne naprave v nezatesnjenih prostorih
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 15287-1:2021
01-november-2021
Dimniki - Projektiranje, vgradnja in pregled - 1. del: Dimniki in povezovalni
dimovodi za ogrevalne naprave v nezatesnjenih prostorih
Chimneys - Design, installation and commissioning - Part 1: Chimneys and connecting
flue pipes for non-room sealed combustion appliancesAbgasanlagen - Planung, Montage und Abnahme - Teil 1: Senkrechte Teile von
Abgasanlagen und Verbindungsstücke für raumluftabhängige
Verbrennungseinrichtungen
Conduits de fumée - Conception, installation et mise en oeuvre - Partie 1: Conduits de
fumée et conduits de raccordement pour appareils à combustion qui dépendent de l’air
dans la pièceTa slovenski standard je istoveten z: prEN 15287-1
ICS:
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
oSIST prEN 15287-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 15287-1:2021
---------------------- Page: 2 ----------------------
oSIST prEN 15287-1:2021
DRAFT
EUROPEAN STANDARD
prEN 15287-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2021
ICS 91.060.40 Will supersede EN 15287-1:2007+A1:2010
English Version
Chimneys - Design, installation and commissioning - Part
1: Chimneys and connecting flue pipes for non-room
sealed combustion appliances
Conduits de fumée - Conception, installation et mise en Abgasanlagen - Planung, Montage und Abnahme - Teil
service - Partie 1: Conduits de fumée et conduits de 1: Senkrechte Teile von Abgasanlagen und
raccordement pour appareils de combustion qui Verbindungsstücke für raumluftabhängige
prélèvent l'air comburant dans la pièce VerbrennungseinrichtungenThis draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 166.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15287-1:2021 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 15287-1:2021
prEN 15287-1:2021 (E)
Contents Page
European foreword ...................................................................................................................................................... 7
Introduction .................................................................................................................................................................... 8
1 Scope .................................................................................................................................................................... 9
2 Normative references .................................................................................................................................... 9
3 Terms and definitions ................................................................................................................................. 11
4 Design ................................................................................................................................................................ 20
4.1 General.............................................................................................................................................................. 20
4.1.1 Introduction .................................................................................................................................................... 20
4.1.2 Temperature classes.................................................................................................................................... 21
4.1.3 Pressure classes ............................................................................................................................................ 21
4.1.4 Condensate resistance classes ................................................................................................................. 21
4.1.5 Corrosion resistance classes ..................................................................................................................... 22
4.1.6 Sootfire resistance classes ......................................................................................................................... 23
4.1.7 Minimum distance to combustible material and type of installation ........................................ 23
4.2 Required information ................................................................................................................................. 25
4.2.1 Sources of data and information ............................................................................................................. 25
4.2.2 Local conditions............................................................................................................................................. 25
4.2.3 Combustion appliance information ....................................................................................................... 25
4.2.4 Combustion air supply ................................................................................................................................ 25
4.2.5 Building structure and chimney route .................................................................................................. 26
4.2.6 Existing chimney ........................................................................................................................................... 26
4.2.7 Chimney product specification ................................................................................................................ 26
4.3 Design requirements ................................................................................................................................... 26
4.3.1 General.............................................................................................................................................................. 26
4.3.2 Route of the installation ............................................................................................................................. 27
4.3.3 Designation of the chimney and connecting flue pipe ..................................................................... 28
4.3.4 Materials of construction ........................................................................................................................... 30
4.3.5 Chimney sizing and characteristics ........................................................................................................ 31
4.3.6 Installation requirements ......................................................................................................................... 31
4.3.7 Accessories ...................................................................................................................................................... 36
4.4 Chimney plate and additional information ......................................................................................... 39
5 Installation ...................................................................................................................................................... 40
5.1 General.............................................................................................................................................................. 40
5.2 Construction of relined chimneys ........................................................................................................... 41
5.3 Chimney plate................................................................................................................................................. 41
6 Commissioning/handover ......................................................................................................................... 41
Annex A (informative) Terminology ................................................................................................................... 42
Annex B (informative) Examples of installation configurations .............................................................. 45
Annex C (informative) List of combustion appliance data required for the design of a
chimney ............................................................................................................................................................ 50
---------------------- Page: 4 ----------------------oSIST prEN 15287-1:2021
prEN 15287-1:2021 (E)
C.1 For choosing the chimney type (required chimney designation): .............................................. 50
C.2 For calculation of the chimney (sizing, see 4.3.5): ............................................................................ 50
C.3 For combustion appliance/connecting flue pipe/chimney adapter design/choice: ............ 50
Annex D (informative) Example of typical building structure designed to assist exchange of
information ..................................................................................................................................................... 51
Annex E (informative) Location of chimney outlets ...................................................................................... 54
Annex F (informative) Correlation between the product designation of metal system
chimneys, liners and connecting flue pipes and the corrosion loads in Member States
(MS) .................................................................................................................................................................... 58
Annex G (informative) Correlation between type of flue liner according to the designation
of parameters for clay/ceramic flue liners, clay/ceramic flue blocks and concrete
flue blocks and the designation according to EN 1443 ................................................................... 65
Annex H (informative) Example for chimney plates ..................................................................................... 68
Annex I (informative) Determination of the chimney designation for custom-built and
relined chimneys .......................................................................................................................................... 69
I.1 General ............................................................................................................................................................. 69
I.2 Temperature class ........................................................................................................................................ 69
I.3 Pressure class ................................................................................................................................................ 79
I.4 Condensate resistance class ..................................................................................................................... 79
I.5 Corrosion resistance class ......................................................................................................................... 79
I.6 Sootfire resistance class ............................................................................................................................. 79
I.7 Minimum distance to combustible material ....................................................................................... 80
Annex J (informative) Example for the determination of the designation of a relined
chimney using a metal flue liner ............................................................................................................. 81
J.1 Input data for a typical relined chimney .............................................................................................. 81
J.1.1 Existing chimney ........................................................................................................................................... 81
J.1.2 Flue liner .......................................................................................................................................................... 81
J.1.3 Insulation ......................................................................................................................................................... 81
J.2 Temperature class ........................................................................................................................................ 82
J.2.1 General ............................................................................................................................................................. 82
J.2.2 Material characteristic ............................................................................................................................... 82
J.2.3 Resistance to fire .......................................................................................................................................... 82
J.2.4 Human contact ............................................................................................................................................... 83
J.2.5 Determination of temperature class ..................................................................................................... 83
J.2.6 Check of mean temperatures ................................................................................................................... 83
J.3 Pressure class ................................................................................................................................................ 84
J.4 Condensate resistance class ..................................................................................................................... 84
J.5 Corrosion resistance class ......................................................................................................................... 84
---------------------- Page: 5 ----------------------oSIST prEN 15287-1:2021
prEN 15287-1:2021 (E)
J.6 Sootfire resistance class ............................................................................................................................. 84
J.7 Minimum distance to combustible material ....................................................................................... 84
J.8 Designation of the relined chimney ....................................................................................................... 84
J.9 Chimney plate of the relined chimney in this example ................................................................... 85
Annex K (informative) Example for the determination of the designation of a custom-built
chimney using a clay/ceramic flue liner .............................................................................................. 86
K.1 Input data for a custom-built chimney .................................................................................................. 86
K.1.1 General.............................................................................................................................................................. 86
K.1.2 Flue liner .......................................................................................................................................................... 86
K.1.3 Insulation ......................................................................................................................................................... 86
K.1.4 Enclosure ......................................................................................................................................................... 86
K.2 Temperature class ........................................................................................................................................ 87
K.2.1 General.............................................................................................................................................................. 87
K.2.2 Material characteristic ................................................................................................................................ 87
K.2.3 Resistance to fire ........................................................................................................................................... 87
K.2.4 Human contact ............................................................................................................................................... 88
K.2.5 Determination of temperature class ...................................................................................................... 88
K.2.6 Check of the temperature at the outer surface of the chimney .................................................... 88
K.3 Pressure class ................................................................................................................................................. 88
K.4 Condensate resistance class ...................................................................................................................... 89
K.5 Corrosion resistance class ......................................................................................................................... 89
K.6 Sootfire resistance class ............................................................................................................................. 89
K.7 Minimum distance to combustible material ....................................................................................... 89
K.8 Designation of the custom-built chimney ............................................................................................ 89
Annex L (informative) Minimum distances to combustible material ..................................................... 90
L.1 Connecting flue pipes without designation according to 4.1 ........................................................ 90
L.2 Access components ...................................................................................................................................... 90
L.3 Plastic flue liners in a chimney stack ..................................................................................................... 91
Annex M (informative) Calculating the temperature of adjacent material .......................................... 93
M.1 Method for the calculation of the temperature of adjacent materials (e.g.weatherproofing) .......................................................................................................................................... 93
M.2 Example for calculation of the temperature of adjacent materials (e.g.weatherproofing) .......................................................................................................................................... 95
Annex N (informative) Useful hints for handling of materials and components on site .................. 96
N.1 General.............................................................................................................................................................. 96
N.2 Check of existing chimney ......................................................................................................................... 96
N.3 Checking before installation ..................................................................................................................... 96
---------------------- Page: 6 ----------------------oSIST prEN 15287-1:2021
prEN 15287-1:2021 (E)
N.4 Checking on delivery of materials .......................................................................................................... 96
N.5 Site handling and storage .......................................................................................................................... 96
N.6 Coordination of work .................................................................................................................................. 97
Annex O (informative) Chimney commissioning ........................................................................................... 98
O.1 General ............................................................................................................................................................. 98
O.2 Physical checks .............................................................................................................................................. 98
O.3 Operational checks ...................................................................................................................................... 99
O.3.1 General ............................................................................................................................................................. 99
O.3.2 Tightness of the chimney ........................................................................................................................... 99
O.3.2.1 Flue flow test for gas .................................................................................................................................... 99
O.3.2.2 Flue flow test for oil ..................................................................................................................................... 99
O.3.2.3 Flue flow test for solid fuel: .................................................................................................................... 100
O.3.2.4 Pressure test for positive pressure chimneys ................................................................................. 100
O.3.3 Function of the combustion appliance (Flue draught test) ........................................................ 101
Annex P (informative) Recommendations for inspection, cleaning and maintenance ................. 102
P.1 General .......................................................................................................................................................... 102
P.2 Inspection and cleaning .......................................................................................................................... 102
P.3 Maintenance ................................................................................................................................................ 102
Annex Q (informative) Flue damper ................................................................................................................ 103
Q.1 General .......................................................................................................................................................... 103
Q.2 Flue damper types ..................................................................................................................................... 104
Q.2.1 Type 1............................................................................................................................................................. 104
Q.2.2 Type 2............................................................................................................................................................. 105
Q.2.3 Type 3............................................................................................................................................................. 105
Q.2.4 Type 4............................................................................................................................................................. 106
Q.2.5 Type 5............................................................................................................................................................. 106
Q.3 Additional information for the use of a flue damper type 2 and 4 .......................................... 107
Q.3.1 Boilers with forced draught burners .................................................................................................. 107
Q.3.2 Boilers with burners with fan without air purging ....................................................................... 107
Q.3.3 Boilers with burners with fan with post-purge period ................................................................ 107
Q.3.4 Gas boilers with burners without fan ................................................................................................. 107
Q.3.5 Closing time of the flue damper flap ................................................................................................... 107
Q.3.6 Malfunction of the flue damper ............................................................................................................ 108
Annex R (informative) Terminals ..................................................................................................................... 109
R.1 Terminal types ............................................................................................................................................ 109
R.2 Required information .............................................................................................................................. 109
---------------------- Page: 7 ----------------------oSIST prEN 15287-1:2021
prEN 15287-1:2021 (E)
R.2.1 General........................................................................................................................................................... 109
R.2.2 Terminal Type Ia ........................................................................................................................................ 109
R.2.3 Terminal Type Ib ........................................................................................................................................ 109
R.2.4 Terminal Type II ......................................................................................................................................... 110
R.2.5 Terminal Type III ....................................................................................................................................... 110
Bibliography .............................................................................................................................................................. 111
---------------------- Page: 8 ----------------------oSIST prEN 15287-1:2021
prEN 15287-1:2021 (E)
European foreword
This document (prEN 15287-1:2021) has been prepared by Technical Committee CEN/TC 166
“Chimneys”, the secretariat of which is held by ASI.This document is currently submitted to the CEN Enquiry.
This document will supersede EN 15287-1:2007+A1:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This European Standard is part of the series Chimneys — Design, installation and commissioning:
— Part 1: Chimneys and connecting flue pipes for non-room sealed combustion appliances;
— Part 2: Chimneys and connecting flue pipes for room sealed combustion appliances.
Currently the standard series EN 1856, Chimneys — Requirements for metal chimneys, is also under
revision and if accepted, modifications to the normative text will be have to be made regarding metal
chimneys.In comparison with the previous edition, the following technical modifications have been made:
a) restructuring of the chapters and annexes;b) harmonization of the text with part 2;
c) updating the content according to EN 1443:2019;
d) adoption of all relevant terms from EN 1443:2019;
e) description of the designation and classes of a chimney according to EN 1443:2019;
f) expanding the specifications for accessories;g) schematic illustrations of examples of installation configurations;
h) recommendations for some minimum distances from combustible material;
i) scope now covers positive pressure chimneys.
---------------------- Page: 9 ----------------------
oSIST prEN 15287-1:2021
prEN 15287-1:2021 (E)
Introduction
CEN/TC 166 started with its programme on standardization of chimneys approximately 30 years ago,
with standards for interfaces, for products, for tests and last but not least for design, installation,
construction and commissioning matters.In the last years, first priority in the work program was given
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.