SIST EN ISO 4610:2002

Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001)

ISO 4610:2001 specifies a method for the determination of the sieve retention and particle size distribution of preferably free-flowing vinyl chloride homopolymer and copolymer resins prepared by the 'suspension', 'bulk' and 'emulsion' polymerization processes. Control of these characteristics can help to ensure consistency of supply and predictable processing behaviour.

Kunststoffe - Vinylchlorid-Homo- und Copolymerisate - Siebanalyse mit der Luftstrahl-Siebmaschine (ISO 4610:2001)

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Siebrückstandes und Partikelgrößenverteilung von vorzugsweise rieselfähigen Vinylchlorid-Homo- und Copolymerisaten fest, die nach dem ?Suspensions-", ?Masse-" und ?Emulsionspolymerisations"-Verfahren hergestellt sind. Die Kontrolle dieser Eigenschaften kann dazu dienen, die Gleichmäßigkeit der Lieferungen und das voraussichtliche Verhalten bei der Verarbeitung zu sichern.

Plastiques - Résines d'homopolymeres et copolymeres de chlorure de vinyle - Analyse granulométrique sur tamiseuse a dépression d'air (ISO 4610:2001)

L'ISO 4610:2001 spécifie une méthode de détermination des refus sur tamis et de la répartition granulométrique des résines d'homopolymères et de copolymères du chlorure de vinyle, de préférence susceptibles de s'écouler librement, préparées selon les procédés de polymérisation «en suspension», «en masse» et «en émulsion». La maîtrise de ces caractéristiques peut contribuer à garantir l'uniformité de la fourniture et un comportement prévisible à la mise en oeuvre.

Polimerni materiali - Homo- in kopolimeri vinilklorida - Sejalna analiza s sejalnim aparatom z zračnim tokom (ISO 4610:2001)

General Information

• Status: Published
• Publication Date: 31-Aug-2002
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2002
• Due Date: 01-Sep-2002
• Completion Date: 01-Sep-2002
• Ref Project: EN ISO 4610:2001 - Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001)

Relations

• Replaces: SIST EN ISO 4610:2000 - Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:1977)
• Effective Date: 01-Sep-2002

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4610:2002
01-september-2002
1DGRPHãþD
SIST EN ISO 4610:2000
3ROLPHUQLPDWHULDOL+RPRLQNRSROLPHULYLQLONORULGD6HMDOQDDQDOL]DVVHMDOQLP
DSDUDWRP]]UDþQLPWRNRP,62
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet
sieve apparatus (ISO 4610:2001)
Kunststoffe - Vinylchlorid-Homo- und Copolymerisate - Siebanalyse mit der Luftstrahl-
Siebmaschine (ISO 4610:2001)
Plastiques - Résines d'homopolymeres et copolymeres de chlorure de vinyle - Analyse
granulométrique sur tamiseuse a dépression d'air (ISO 4610:2001)
Ta slovenski standard je istoveten z: EN ISO 4610:2001
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 4610:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4610:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 4610:2002
EUROPEAN STANDARD
EN ISO 4610
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2001
ICS 83.080.20 Supersedes EN ISO 4610:1997
English version
Plastics - Vinyl chloride homopolymer and copolymer resins -
Sieve analysis using air-jet sieve apparatus (ISO 4610:2001)
Plastiques - Résines d'homopolymères et copolymères de Kunststoffe - Vinylchlorid-Homo- und Copolymerisate -
chlorure de vinyle - Analyse granulométrique sur tamiseuse Siebanalyse mit der Luftstrahl-Siebmaschine (ISO
à dépression d'air (ISO 4610:2001) 4610:2001)
This European Standard was approved by CEN on 4 October 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4610:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4610:2002
EN ISO 4610:2001 (E)
CORRECTED  2002-02-06
Foreword
The text of the International Standard from Technical Committee ISO/TC 61 "Plastics" of the
International Organization for Standardization (ISO) has been taken over as a European Standard
by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by IBN.
This document supersedes EN ISO 4610:1997.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2002, and conflicting national standards shall
be withdrawn at the latest by April 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 4610:2001 has been approved by CEN as a European
Standard without any modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 4610:2002
INTERNATIONAL ISO
STANDARD 4610
Second edition
2001-10-15
Corrected version
2007-02-01
Plastics — Vinyl chloride homopolymer and
copolymer resins — Sieve analysis using
air-jet sieve apparatus
Plastiques — Résines d'homopolymères et copolymères de chlorure de
vinyle — Analyse granulométrique sur tamiseuse à dépression d'air

Reference number
ISO 4610:2001(E)
© ISO 2001

---------------------- Page: 5 ----------------------

SIST EN ISO 4610:2002
ISO 4610:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elec-
tronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's mem-
ber body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2001 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 4610:2002
ISO 4610:2001(E)
Contents Page
1 Scope . 1
2 Normative reference . 1
3 Term and definition . 1
4 Sampling . 1
5 Sample preparation . 1
6 Apparatus . 2
7 Procedure . 3
8 Expression of results . 3
9 Precision . 4
10 Test report . 4
©
ISO 2001 – All rights reserved iii

---------------------- Page: 7 ----------------------

SIST EN ISO 4610:2002
ISO 4610:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical com-
mittees. Each member body interested in a subject for which a technical committee has been established has the
right to be represented on that committee. International organizations, governmental and non-governmental, in liai-
son w
...