oSIST prEN 17098-1:2024
(Main)Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films
Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films
This document specifies the requirements relating to the dimensional, mechanical and physical-chemical characteristics of thermoplastic barrier films designed for agricultural and horticultural soil disinfection by means of fumigation.
This document specifies also the test methods for verifying these requirements, except the method for determining film permeability using a static technique, which is specified in EN 17098 2.
This document defines the criteria for design for recycling of barrier films and refer to prEN 181091 for the product lifecycle, including installation, use, removal and collection for end of life for management of the product after its usage.
This document is applicable to films used during soil disinfection by fumigation (class 1), and to films used during soil disinfection subsequently kept in situ as mulch films (class 2).
On the date of publication of this document, the barrier films are multi-layer films.
Kunststoffe - Sperrschichtfolien für die Desinfektion durch Begasung von Landwirtschafts- und Gartenbauböden - Teil 1: Spezifikationen für Sperrschichtfolien
Dieses Dokument legt die Anforderungen an die Maß-, mechanischen und physikalisch-chemischen Eigenschaften von thermoplastischen Sperrschichtfolien für die Desinfektion von Landwirtschafts- und Gartenbauböden durch Begasung fest.
Darüber hinaus legt dieses Dokument die Prüfverfahren zur Überprüfung dieser Anforderungen fest, mit Ausnahme des Verfahrens zur Bestimmung der Foliendurchlässigkeit unter Verwendung einer statischen Technik, die in EN 17098 2 definiert wird.
Dieses Dokument definiert die Kriterien für das recyclinggerechte Design von Sperrschichtfolien und verweist auf prEN 181091 für den Produktlebenszyklus, einschließlich Installation, Nutzung, Entsorgung und Sammlung am Ende des Lebenszyklus für das Management des Produkts nach seiner Nutzung.
Dieses Dokument gilt für Folien, die im Rahmen der Bodendesinfektion durch Begasung (Klasse 1), und Folien, die während der Bodendesinfektion verwendet und anschließend vor Ort als Mulchfolie belassen werden (Klasse 2).
Die Sperrschichtfolien sind zum Datum der Veröffentlichung dieses Dokuments mehrlagige Folien.
Plastiques - Films barrière pour la désinfection par fumigation des sols agricoles et horticoles - Partie 1: Spécifications des films barrière
Le présent document spécifie les exigences relatives aux caractéristiques dimensionnelles, mécaniques et physico-chimiques des films barrière en thermoplastiques destinés à la désinfection des sols agricoles et horticoles par la technique de fumigation.
Ce document spécifie également les méthodes d’essai permettant de vérifier ces exigences, excepté la méthode de détermination de la perméabilité d’un film utilisant une technique statique, qui est spécifiée dans l’EN 17098 2.
Le présent document définit les critères pour la conception en vue du recyclage des films barrière et fait référence au prEN 181091 pour le cycle de vie du produit, incluant la mise en œuvre, l’utilisation, la dépose et la collecte pour la gestion en fin de vie du produit après usage.
Ce document est applicable aux films utilisés pendant la désinfection par fumigation des sols (classe 1) et aux films utilisés pendant la désinfection des sols et qui restent ensuite in situ pour servir de films de paillage (classe 2).
À la date de publication du présent document, les films barrière sont des films multicouches.
Polimerni materiali - Zaščitne folije za razkuževanje kmetijske in vrtnarske zemlje z zaplinjevanjem - 1. del: Specifikacije za zaščitne folije
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Polimerni materiali - Zaščitne folije za razkuževanje kmetijske in vrtnarske zemlje z
zaplinjevanjem - 1. del: Specifikacije za zaščitne folije
Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation -
Part 1: Specifications for barrier films
Kunststoffe - Sperrschichtfolien für die Desinfektion durch Begasung von
Landwirtschafts- und Gartenbauböden - Teil 1: Spezifikationen für Sperrschichtfolien
Plastiques - Films barrière pour la désinfection par fumigation des sols agricoles et
horticoles - Partie 1: Spécifications des films barrière
Ta slovenski standard je istoveten z: prEN 17098-1
ICS:
65.060.99 Drugi kmetijski stroji in Other agricultural machines
oprema and equipment
83.140.10 Filmi in folije Films and sheets
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2024
ICS 83.140.10 Will supersede EN 17098-1:2018
English Version
Plastics - Barrier films for agricultural and horticultural
soil disinfection by fumigation - Part 1: Specifications for
barrier films
Plastiques - Films barrière pour la désinfection par Kunststoffe - Sperrschichtfolien zur Desinfektion durch
fumigation des sols agricoles et horticoles - Partie 1: Begasung von Landwirtschafts- und Gartenbauböden -
Spécifications des films barrière Teil 1: Spezifikationen für Sperrschichtfolien
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17098-1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions, and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 9
4 Classification of films by service life . 9
5 Material and permeability to fumigants . 9
5.1 General. 9
5.2 Determination of the film permeability . 10
5.3 Recyclability and recycled content . 11
6 Requirements . 11
6.1 General requirements . 11
6.2 Requirement for appearance . 12
6.3 Optional characteristics . 12
7 Test methods . 13
7.1 Determination of the thickness . 13
7.2 Determination of the width . 13
7.3 Determination of the roll length . 13
7.4 Determining tensile properties . 14
7.5 Determination of the weathering resistance (for class 2 films only) . 14
7.6 Determination of the peel strength . 14
7.7 Determining impact resistance . 17
7.8 Determining relative light transmission . 18
8 Roll acceptance, storage and handling . 19
8.1 Delivery checking . 19
8.2 Storage and handling of rolls . 19
9 Designation of barrier films . 20
10 Marking . 20
10.1 General. 20
10.2 Marking of the film . 20
10.3 Marking on the packaging or label . 21
11 Installation instructions and conditions for use . 22
12 Design for recycling of barrier films used for fumigation . 22
13 Removal and collection instructions of used barrier films . 23
Annex A (informative) Exposure to other light sources . 24
A.1 Medium pressure mercury vapour lamps . 24
A.2 Fluorescent UV lamps . 26
Annex B (informative) Determination of the puncture resistance . 27
B.1 Principle . 27
B.2 Apparatus . 27
B.3 Specimen preparation . 28
B.4 Procedure . 28
B.5 Expression of results . 29
B.6 Test report . 29
Bibliography . 30
European foreword
This document has been prepared by Technical Committee CEN/TC 249 “Plastics”, the secretariat of
which is held by SIS.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 17098-1:2018.
EN 17098:2018:
— Clause 8 on the design-for-recycling of end of life of barrier films has been added;
— Clause 10 on removal and collection instructions of used barrier films has been modified, referring
to prEN 18109 for additional information;
— in Clause 11 on removal and collection instructions of used barrier films, the reference to Annex C
Error! Bookmark not defined.
has been deleted, referring to prEN 18109 for additional
information;
— Annex C on guidance for conditions for installation, use and removal of barrier films, has been
deleted
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
EN 17098, Plastics — Barrier films for agricultural and horticultural soil disinfection by fumigation,
consists of the following parts:
— Part 1: Specifications for barrier films
— Part 2: Method for determining film permeability using a static technique
Under preparation
Introduction
Use of barrier films designed for agricultural and horticultural soil disinfection by means of fumigation
has the main objectives of protecting operators and personnel during and after the fumigation
operation, limiting the consumption of harmful substances and safeguarding the environment.
1 Scope
This document specifies the requirements relating to the dimensional, mechanical and physical-
chemical characteristics of thermoplastic barrier films designed for agricultural and horticultural soil
disinfection by means of fumigation.
This document specifies also the test methods for verifying these requirements, except the method for
determining film permeability using a static technique, which is specified in EN 17098-2.
This document defines the criteria for design for recycling of barrier films and refer to prEN 18109 for
the product lifecycle, including installation, use, removal and collection for end of life for management
of the product after its usage.
This document is applicable to films used during soil disinfection by fumigation (class 1), and to films
used during soil disinfection subsequently kept in situ as mulch films (class 2).
On the date of publication of this document, the barrier films are multi-layer films.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 17098-2, Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part
2: Method for film permeability determination using a static technique
EN ISO 291, Plastics - Standard atmospheres for conditioning and testing (ISO 291)
EN ISO 527-1, Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1)
EN ISO 527-3, Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
(ISO 527-3)
EN ISO 1133-1, Plastics - Determination of the melt mass-flow rate (MFR) an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.