SIST EN 61753-052-6:2017

Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single mode fibre non connectorized fixed attenuator for category O - Outside plant environment (IEC 61753-052-6:2016)

This part of IEC 61753 contains the minimum initial test and measurement requirements and
severities which a fibre optic attenuator satisfies in order to be categorised as meeting the
requirements of single-mode fibre non-connectorized fixed attenuator devices used in outside
plant environments. IEC 60869-1 contains the generic specification of the optical attenuator.
Optical performances specified in this document relate only to non-connectorized optical
attenuators.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 052-6: Nicht mit Steckverbindern versehene Festwert-Einmoden-Lichtwellenleiter-Dämpfungsglieder - Kategorie O in unkontrollierter Umgebung

Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance - Partie 052-6: Affaiblisseur optique fixe non connectorisé pour fibres unimodales - Catégorie O pour des installations dans un environnement extérieur

IEC 61753-052-6:2016 contient les exigences de mesure et d'essai initiales minimales et les sévérités auxquelles satisfait un affaiblisseur fibronique pour être classé comme conforme aux exigences d'un affaiblisseur fixe non connectorisé à fibres unimodales destiné à être utilisé dans des installations dans un environnement extérieur. L'IEC 60869-1 contient la spécification générique de l'affaiblisseur optique.  Les performances optiques spécifiées dans le présent document concernent uniquement des affaiblisseurs optiques non connectorisés.
Mots clés:  affaiblisseur fixe non connectorisé,  catégorize  O pour des installations dans un environnement extérieur

Optični spojni elementi in pasivne komponente - Tehnični standard - 052-6. del: Fiksni atenuatorji z enorodnimi vlakni brez konektorja za kategorijo O - Okolje zunanje instalacije (IEC 61753-052-6:2016)

Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora izpolnjevati atenuator z optičnim vlaknom, da ustreza zahtevam za fiksne atenuatorje z enorodnimi vlakni brez konektorja, ki se uporabljajo v okoljih zunanjih instalacij. Standard IEC 60869-1 vsebuje splošno specifikacijo za optični atenuator. V tem dokumentu navedene optične zmogljivosti veljajo samo za optične atenuatorje brez konektorja.

General Information

• Status: Published
• Publication Date: 26-Jan-2017
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 04-Jan-2017
• Due Date: 11-Mar-2017
• Completion Date: 27-Jan-2017
• Ref Project: EN 61753-052-6:2016 - Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non-connectorized fixed attenuator - Category O in outside plant environment

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-052-6:2017
01-marec-2017
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
)LNVQLDWHQXDWRUML]HQRURGQLPLYODNQLEUH]NRQHNWRUMD]DNDWHJRULMR22NROMH
]XQDQMHLQVWDODFLMH,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 052-6: Single mode fibre non connectorized fixed attenuator for category O -
Outside plant environment (IEC 61753-052-6:2016)
Ta slovenski standard je istoveten z: EN 61753-052-6:2016
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61753-052-6:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61753-052-6:2017

---------------------- Page: 2 ----------------------

SIST EN 61753-052-6:2017


EUROPEAN STANDARD EN 61753-052-6

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2016
ICS 33.180.20

English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 052-6: Single-mode fibre non-
connectorized fixed attenuator - Category O in outside plant
environment
(IEC 61753-052-6:2016)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 052-6: Bauteile - Betriebsverhalten - Teil 052-6: Nicht mit
Affaiblisseur optique fixe non connectorisé pour fibres Steckverbindern versehene Festwert-Einmoden-
unimodales - Catégorie O pour des installations dans un Lichtwellenleiter-Dämpfungsglieder - Kategorie O in
environnement extérieur Freiluftanlagen
(IEC 61753-052-6:2016) (IEC 61753-052-6:2016)
This European Standard was approved by CENELEC on 2016-09-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61753-052-6:2016 E

---------------------- Page: 3 ----------------------

SIST EN 61753-052-6:2017
EN 61753-052-6:2016
European foreword
The text of document 86B/3995/FDIS, future edition 1 of IEC 61753-052-6, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-052-6:2016.
The following dates are fixed:
(dop) 2017-06-23
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-12-23
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61753-052-6:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-1 NOTE Harmonized as EN 60068-1.
IEC 60869-1 NOTE Harmonized as EN 60869-1.
IEC 61300 NOTE Harmonized in EN 61300 series.
IEC 61300-3-28 NOTE Harmonized as EN 61300-3-28.
2

---------------------- Page: 4 ----------------------

SIST EN 61753-052-6:2017
EN 61753-052-6:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60793-2-50 -  Optical fibres - EN 60793-2-50 -
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres
IEC 60794-2-50 -  Optical fibre cables - EN 60794-2-50 -
Part 2-50: Indoor cables - Family specification for
simplex and duplex cables for use in terminated
cable assemblies
IEC 61300-2-1 -  Fibre optic interconnecting devices and passive EN 61300-2-1 -
components - Basic test and measurement
procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-4 -  Fibre optic interconnecting devices and passive EN 61300-2-4 -
components - Basic test and measurement
procedures -
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-5 -  Fibre optic interconnecting devices and passive EN 61300-2-5 -
components - Basic test and measurement
procedures -
Part 2-5: Tests - Torsion
IEC 61300-2-9 -  Fibre optic interconnecting devices and passive EN 61300-2-9 -
components - Basic test and measurement
procedures -
Part 2-9: Tests - Shock
IEC 61300-2-14 -  Fibre optic interconnecting devices and passive EN 61300-2-14 -
components - Basic test and measurement
procedures -
Part 2-14: Tests - High optical power
IEC 61300-2-19 -  Fibre optic interconnecting devices and passive EN 61300-2-19 -
components - Basic test and measurement
procedures -
Part 2-19: Tests - Damp heat (steady state)
3

---------------------- Page: 5 ----------------------

SIST EN 61753-052-6:2017
EN 61753-052-6:2016
Publication Year Title EN/HD Year
IEC 61300-2-22 -  Fibre optic interconnecting devices and passive EN 61300-2-22 -
components - Basic test and measurement
procedures -
Part 2-22: Tests - Change of temperature
IEC 61300-2-42 -  Fibre optic interconnecting devices and passive EN 61300-2-42 -
components - Basic test and measurement
procedures -
Part 2-42: Tests - Static side load for strain relief
IEC 61300-2-44 -  Fibre optic interconnecting devices and passive EN 61300-2-44 -
components - Basic test and measurement
procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices
IEC 61300-2-48 -  Fibre optic interconnecting devices and EN 61300-2-48 -
passive components - Basic test and
measurement procedures -
Part 2-48: Tests - Temperature-humidity
cycling
IEC 61300-3-2 -  Fibre optic interconnecting devices and passive EN 61300-3-2 -
components - Basic test and measurement
procedures -
Part 3-2: Examination and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-3 -  Fibre optic interconnecting devices and passive EN 61300-3-3 -
components - Basic test and measurement
procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation and
return loss
IEC 61300-3-7 -  Fibre optic interconnecting devices and passive EN 61300-3-7 -
components - Basic test and measurement
procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components

4

---------------------- Page: 6 ----------------------

SIST EN 61753-052-6:2017



IEC 61753-052-6

®


Edition 1.0 2016-07




INTERNATIONAL



STANDARD




















Fibre optic interconnecting devices and passive components – Performance

standard –

Part 052-6: Single-mode fibre non-connectorized fixed attenuator – Category O


in outside plant environment
























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 33.180.20 ISBN 978-2-8322-3547-8



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 61753-052-6:2017
– 2 – IEC 61753-052-6:2016 © IEC 2016
CONTENTS
FOREWORD .3
1 Scope .5
2 Normative references .5
3 Test .6
4 Test report .6
5 Performance requirements .6
5.1 Sample size, sequencing and grouping.6
5.2 Dimensions .6
5.3 Test details and requirements .6
Annex A (normative) Test sequencing for single-mode non-connectorized fixed
attenuators, category O . 11
Bibliography . 12

Table 1 – Test details and requirements .7
Table A.1 – Test sequence for single-mode non-connectorized fixed attenuators,
category O . 11

---------------------- Page: 8 ----------------------

SIST EN 61753-052-6:2017
IEC 61753-052-6:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –

Part 052-6: Single-mode fibre non-connectorized fixed attenuator –
Category O in outside plant environment

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated
in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-052-6 had been prepared by subcommittee 86B: Fibre
optic interconnecting devices and passive components of IEC technical committee 86: Fibre
optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/3995/FDIS 86B/4010/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 9 ----------------------

SIST EN 61753-052-6:2017
– 4 – IEC 61753-052-6:2016 © IEC 2016
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 61753 series, published under the general title Fibre optic
interconnecting devices and passive components – Performance standard, can be found on
the IEC website.
Future standards in this series will carry the new general title as cited above. Titles of
existing standards in this series will be updated at the time of the next edition.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 10 ----------------------

SIST EN 61753-052-6:2017
IEC 61753-052-6:2016 © IEC 2016 – 5 –
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –

Part 052-6: Single-mode fibre non-connectorized fixed attenuator –
Category O in outside plant environment



1 Scope
This part of IEC 61753 co
...