SIST ETS 300 323-2 E1:2003

• Abstract:

  Based upon the Public Access Profile (ETS 300 175-9) & ISO 9646, to develop a PT & FT abstract test suite. This shall include both the tests required for TBR 11 & those required for voluntary conformance testing, in total, all of the PAP features. The tests shall use the Remote Single Layer Embedded test method.

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.060.20 - Receiving and transmitting equipment
• ICS: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI ETS 300 323-2 ed.1 (1994-04) - Digital Enhanced Cordless Telecommunications (DECT); Public Access Profile (PAP) test specification; Part 2: PT Abstract Test Suite (ATS)

Overview

SIST ETS 300 323-2 E1:2003 is a European standard developed by the Slovenski inštitut za standardizacijo (SIST) and aligned with ETSI’s ETS 300 323-2. This document focuses on the Digital Enhanced Cordless Telecommunications (DECT); Public Access Profile (PAP) Test Specification. Specifically, Part 2 addresses the Portable radio Termination (PT) Abstract Test Suite (ATS) and defines standardized testing methods to ensure DECT PAP compliance.

This standard is rooted in the DECT Public Access Profile (ETS 300 175-9) and the widely recognized ISO 9646 framework for conformance testing. It serves as a critical resource for manufacturers and testing laboratories, offering detailed guidelines for both mandatory tests (e.g., those required by TBR 11) and voluntary conformance checks on all PAP features.

Key Topics

• DECT Public Access Profile (PAP): Centralized focus on testing for DECT devices using the Public Access Profile, ensuring interoperability and performance.
• Abstract Test Suite (ATS): Provides a complete set of test cases written in Tree and Tabular Combined Notation (TTCN) for DECT PTs.
• Remote Single Layer Embedded Test Method: Specifies the testing approach for executing abstract tests remotely on the device under test.
• Test Structure: The test suite covers:
  • Overview, Declarations, Constraints, and Dynamic Behavior (TTCN modules)
  • Real-effects tests described in natural language for non-protocol aspects
• Conformance Requirements: Incorporates elements from the PICS (Protocol Implementation Conformance Statement) and PIXIT (Protocol Implementation eXtra Information for Testing) proformas for comprehensive feature coverage.

Applications

SIST ETS 300 323-2 E1:2003 provides practical value for various stakeholders in the telecommunications industry:

• Device Manufacturers: Ensures DECT products conform to public access standards, leading to improved compatibility and market acceptance.
• Testing Laboratories: Supplies a complete, standardized abstract test suite (ATS) that can be easily converted into executable tests for DECT PTs, streamlining the product certification process.
• Telecommunications Operators: Supports selection and deployment of tested devices for public access cordless telephony, enhancing service reliability and customer satisfaction.
• Conformance Assessment: Facilitates both mandatory regulatory testing and voluntary performance evaluations, giving manufacturers flexibility and ensuring robust feature conformity.
• Documentation & Compliance: PICS and PIXIT proformas assist companies in preparing necessary documentation for conformance, easing the regulatory compliance process.

Related Standards

For comprehensive testing and conformance in DECT systems, the following related standards are highly relevant:

• ETS 300 175-9: Digital European Cordless Telecommunications (DECT) - Common Interface Part 9: Public Access Profile
• ISO/IEC 9646: OSI Conformance Testing Methodology and Framework (Parts 1, 2, 3, and 6)
• ETS 300 323-1: DECT PAP Test Specification Part 1: Overview
• ETS 300 323-3: DECT PAP Test Specification Part 3: PT Protocol Implementation Conformance Statement (PICS) proforma
• ETS 300 323-4: DECT PAP Test Specification Part 4: PT Protocol Implementation eXtra Information for Testing (PIXIT) proforma
• ETS 300 323-5/6/7: Test specification documents relevant to Fixed radio Termination (FT) and associated conformance statements

By adhering to SIST ETS 300 323-2 E1:2003 and its associated standards, organizations can ensure full compliance, optimum device interoperability, and readiness for public access deployment in digital cordless telecommunications networks.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Public Access Profile (PAP) test specification; Part 2: PT Abstract Test Suite (ATS)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:ETS 300 323-2 Edition 1SIST ETS 300 323-2 E1:2003en01-december-2003SIST ETS 300 323-2 E1:2003SLOVENSKI
STANDARD
EUROPEANETS 300 323-2TELECOMMUNICATIONApril 1994STANDARDSource: ETSI TC-RESReference: DE/RES-03020-2ICS:33.060, 33.060.20Key words:DECT, PAP, ATSRadio Equipment and Systems (RES);Digital European Cordless Telecommunications (DECT)Public Access Profile (PAP) test specificationPart 2: PT Abstract Test Suite (ATS)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail].: [phone] - Fax: [phone]Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1994. All rights reserved.SIST ETS 300 323-2 E1:2003

Page 2ETS 300 323-2: April 1994Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 323-2 E1:2003

Page 3ETS 300 323-2: April 1994ContentsForeword.51Scope.72Normative references.73Definitions, symbols and abbreviations.8Annex A (normative):TTCN Graphical Representation (GR).9Annex B (normative):TTCN Machine Processable (MP) files.10Annex C (informative):Bibliography.11History.12SIST ETS 300 323-2 E1:2003

Page 4ETS 300 323-2: April 1994Blank pageSIST ETS 300 323-2 E1:2003

Page 5ETS 300 323-2: April 1994ForewordThis European Telecommunication Standard (ETS) has been produced by the Radio Equipment andSystems (RES) Technical Committee of the European Telecommunication Standards Institute (ETSI).This ETS presents the Abstract Test Suites (ATS) for the Digital European Cordless Telecommunications(DECT) Public Access Profile (PAP) described in Tree and Tabular Combined Notation (TTCN) for thePortable radio Termination (PT).Details of the DECT Common Interface may be found in ETS 300 175 Parts 1 - 9 [11] to [19].Annex A forms an integral part of this ETS and contains the ATS TTCN Graphical Representation (GR).The identification of the associated Machine Processable (MP) ASCI file is contained in Annex B of thisETS.The PAP test specification ETS comprises seven parts:Part 1:Overview.Part 2:Portable radio Termination (PT) Abstract Test Suite (ATS) - versionsavailable in both ISO 9646 TTCN.MP format (electronic) and TTCN.GRformat (paper).Part 3:Portable radio Termination (PT) Protocol Implementation ConformanceStatement (PICS) proforma.Part 4:Portable radio Termination (PT) Protocol Implementation eXtra Information forTesting (PIXIT) proforma.Part 5:Fixed radio Termination (FT) Abstract Test Suite (ATS) - versions available inboth ISO 9646 TTCN.MP format (electronic) and TTCN.GR format (paper).Part 6:Fixed radio Termination (FT) Protocol Implementation Conformance Statement(PICS) proforma.Part 7:Fixed radio Termination (FT) Protocol Implementation eXtra Information forTesting (PIXIT) proforma.SIST ETS 300 323-2 E1:2003

Page 6ETS 300 323-2: April 1994Blank pageSIST ETS 300 323-2 E1:2003

Page 7ETS 300 323-2: April 19941ScopeThis European Telecommunication Standard (ETS) specifies the Portable radio Termination (PT) AbstractTest Suite (ATS) for the Digital European Cordless Telecommunications (DECT) Public Access Profile(PAP) test specification.The ATS describes a set of tests which can be converted using commonly available tools into anexecutable test suite. For the protocol tests, it consists of TTCN tables comprising an overview section, adeclarations section, a constraints section and a dynamic behaviour section.
For the non-protocol tests(real-effects), it describes the test method using natural language.
The real effects test procedures arecontained in ETS 300 323-1 [5] Annex C.The Protocol Implementation Conformance Statement (PICS) proforma shows a checklist of allmandatory, optional and conditional features, elements of procedure, parameters, options, timers, multi-layer depe
...