iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 927-3:2001

(Main)

Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test

Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test

This part of EN 927 specifies a natural weathering test for exterior wood coating systems mainly intended for decoration and protection of planed and sawn wood. The test provides a means of evaluating the performance of a wood coating system during outdoor exposure. It
forms the basis for the performance specification in accordance with prENV 927-2:2000.

Lacke und Anstrichstoffe - Beschichtungsstoffe und Beschichtungssysteme für Holz im Außenbereich - Teil 3: Freibewitterung

Dieser Teil von EN 927 legt eine Freibewitterungsprüfung von Beschichtungssystemen für Holz im Außenbereich fest, die hauptsächlich zur Dekoration und zum Schutz von glattgehobeltem Schnittholz dienen. Diese Prüfung dient zum Beurteilen des Verhaltens von Beschichtungssystemen für Holz, die dem Wetter ausgesetzt sind. Sie ist die Grundlage der Spezifikation nach prENV 927-2:2000.

Peintures et vernis - Produits de peinture et systemes de peinture pour bois en extérieur - Partie 3: Essai de vieillissement naturel

La présente partie de la norme EN 927 spécifie un essai de vieillissement naturel des systemes de peinture pour le bois en extérieur, principalement prévus pour la décoration et la protection des bois sciés et rabotés. L?essai fournit un moyen d'évaluer les performances d'un systeme de revetement pour bois durant son exposition a l'extérieur. Il sert a évaluer la conformité aux spécifications de performances qui seront publiées dans la norme prENV 927-2 :2000.

Barve in laki - Premazi in premazni sistemi za zunanjo zaščito lesa - 3. del: Preskus s staranjem v naravnih razmerah

General Information

Status
Withdrawn
Publication Date
31-Jan-2001
Withdrawal Date
28-Feb-2007
ICS
71.100.50 - Wood-protecting chemicals
87.040 - Paints and varnishes
Technical Committee
POH - Furniture
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Mar-2007
Due Date
01-Mar-2007
Completion Date
01-Mar-2007
Ref Project
EN 927-3:2000 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test

Relations

Replaced By
SIST EN 927-3:2007 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
Effective Date
01-Mar-2007
Corrected By
SIST EN 927-3:2001/AC:2002 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
Effective Date
22-Dec-2008

Buy Standard

EN 927-3:2001EN 927-3:2001
PreviousNext
Standard
EN 927-3:2001
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 927-3:2001
01-februar-2001
%DUYHLQODNL3UHPD]LLQSUHPD]QLVLVWHPL]D]XQDQMR]DãþLWROHVDGHO3UHVNXV
VVWDUDQMHPYQDUDYQLKUD]PHUDK
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3:
Natural weathering test
Lacke und Anstrichstoffe - Beschichtungsstoffe und Beschichtungssysteme für Holz im
Außenbereich - Teil 3: Freibewitterung
Peintures et vernis - Produits de peinture et systemes de peinture pour bois en extérieur
- Partie 3: Essai de vieillissement naturel
Ta slovenski standard je istoveten z: EN 927-3:2000
ICS:
71.100.50 .HPLNDOLMH]D]DãþLWROHVD Wood-protecting chemicals
87.040 Barve in laki Paints and varnishes
SIST EN 927-3:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 927-3:2001

---------------------- Page: 2 ----------------------

SIST EN 927-3:2001

---------------------- Page: 3 ----------------------

SIST EN 927-3:2001

---------------------- Page: 4 ----------------------

SIST EN 927-3:2001

---------------------- Page: 5 ----------------------

SIST EN 927-3:2001

---------------------- Page: 6 ----------------------

SIST EN 927-3:2001

---------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 927-5:2023(Main)
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability
EN 927-5:2023

This part of EN 927 specifies a test method for assessing the liquid water permeability of coating systems for exterior wood by measuring the water absorption of coated wood panels.
Results are expressed as water absorption in grams per square metre during a period of 72 h.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 927-12:2023(Main)
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 12: Ultraviolet and visible radiation transmittance
CEN/TS 927-12:2023

This Technical Specification describes a test method to measure the ultraviolet (UV) and visible (VIS) spectral transmittance in the wavelength range from 280 nm to 700 nm of coatings for exterior wood. From the spectral transmittance the transmittance of UV, VIS and the UV plus VIS wavelength range can be calculated.
It is applicable to free coatings films or coatings applied on a UV-transparent substrate.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 927-9:2023(Main)
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 9: Determination of pull-off strength
CEN/TS 927-9:2023

This Technical Specification specifies a method for assessing the resistance of a coating system on wet wood to separation from the substrate by measuring the force necessary to detach or rupture the coating system by a normal tensile strain applied through an attached stud (dolly). Additional information is gained by noting the type and locus of failure. The force required for detachment will depend on several factors including the adhesion of the coating to the substrate and between intermediate coating layers. The procedure is not regarded as a direct means of measuring adhesion but an indicator of adhesive performance (adherence) under wet conditions.
A procedure for wetting the wood substrate is described. The test method is only suitable for wood and wood based substrates.
For dry adhesion the test method is allowed to be carried out without wetting in which case it will differ very little from EN ISO 4624.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 927-14:2023(Main)
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 14: Determination of tensile properties of coating films
EN 927-14:2023

This standard is directed at the investigation of the mechanical and tensile properties of free
coating films. It is similar to ISO 5273 and ISO 37 for the testing of plastic and rubber materials
but with particular focus on test sample preparation from free coating films. Typical parameters
for the mechanical behaviour are the modulus of elasticity, the tensile strength and the
elongation at break/elongation at rupture during stretching of a free coating film with constant
speed.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 927-2:2023(Main)
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification
EN 927-2:2022

This part of EN 927 addresses performance criteria for coating systems on exterior wood. Performance requirements are specified according to three categories of end use (defined in EN 927 1) in terms of two mandatory tests namely natural weathering performance testing carried out in accordance with EN 927-3, and water permeability in accordance with EN 927-5. Additional optional tests (non-mandatory) are tabled which may be used by suppliers, or for specification purposes, to provide additional information, to a standardized format, on aspects of performance relevant to specific situations. The majority of test methods are drawn from EN 927 (all parts), but where relevant additional tests from other national and international sources are used.
Requirements for claiming conformity with FprEN 927-2 are defined and provide flexibility for different situations and can also provide a basis for certification.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16360:2021(Main)
Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate
CEN/TS 16360:2021

This document specifies a test method for assessing film extensibility by indentation of a coating on a defined and carefully selected wooden extensibility substrate for coatings on stable wood components in exterior use. The method is preferably be used on coatings that have not been exposed to weathering.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 927-11:2020(Main)
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 11: Assessment of air inclusions/microfoam in coating films
EN 927-11:2020

This document specifies a test method for assessing microfoam in coating films on stable wood components. Samples are taken from finished wood components that are produced in a production plant, by craftsmen or a laboratory.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 927-7:2020(Main)
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 7: Assessment of knot staining resistance of wood coatings
EN 927-7:2020

This standard specifies a test method for assessing the discoloration of coating systems on wood due to wood extractives from knots. The discoloration is measured by colorimetry and the result is stated as the colour difference between the coated surface on the knot and the coated surface beside the knot.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 927-8:2020(Main)
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 8: Determination of the adhesion on wood after water exposure by a double-X-cut test
CEN/TS 927-8:2020

This document describes the method for assessing the resistance of paint coatings to separation from substrates when a double-X pattern is cut into the coating, penetrating through to the substrate and using a tape.
Where a measurement of adhesion is required, the method described in CEN/TS 927-9 may be used.
The double X-cut pattern has been especially designed for wood and wood like substrates to minimise the effects from the incisions and at the same time provide a coating segment enclosed by four cuts.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 927-13:2019(Main)
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 13: Assessment of resistance to impact of a coating on a wooden substrate
EN 927-13:2019

This document specifies a test method for assessing the resistance of a coating to impact on a defined and carefully selected wooden substrate for coatings on wood components in exterior use.
The method is preferably used on coatings that have not been exposed to weathering. The method is suitable for use either as a means of comparing different coating systems or as a quality control test to ensure that a specified performance level is being achieved or maintained.
The nature of the substrate will have a major effect on the results obtained in the test. Therefore use of any other substrate than the one specified should be clearly stated in the test report.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day