Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation underground - Design and manufacture

This European Standard specifies requirements for the design and manufacture of static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) with a volume not greater than 13 m³ and for installation underground.

Ortsfeste, geschweißte zylindrische Behälter aus Stahl, die serienmäßig für die Lagerung von Flüssiggas (LPG) hergestellt werden, mit einem Fassungsvermögen bis 13 m3 für erdgedeckte Aufstellung - Gestaltung und Herstellung

Diese Europäische Norm legt Anforderungen hinsichtlich der Konstruktion und Herstellung ortsfester, geschweißter zylindrischer Behälter aus Stahl fest, die serienmäßig für die Lagerung von Flüssiggas (LPG) gefertigt wurden, mit einem Fassungsraum bis 13 m3 für erdgedeckte Aufstellung.

Réservoirs cylindriques fixes en acier, soudés, fabriqués en série, d'un volume inférieur ou égal a 13 m3, destinés au stockage enterré des gaz de pétrole liquéfiés (GPL) - Conception et fabrication

La présente Norme européenne spécifie les exigences pour la conception et la fabrication des réservoirs cylindriques, fixes, en acier, soudés, de série, destinés au stockage enterré du gaz de pétrole liquéfié (GPL), ayant un volume inférieur ou égal a 13 m3.

Stabilni valjasti varjeni jekleni rezervoarji serijske izdelave za skladiščenje utekočinjenega naftnega plina (UNP) podzemne izvedbe z notranjo prostornino do 13 m3 - Načrtovanje in izdelava

General Information

Status
Withdrawn
Publication Date
30-Nov-2003
Withdrawal Date
17-Oct-2010
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
15-Oct-2010
Due Date
07-Nov-2010
Completion Date
18-Oct-2010

Relations

Buy Standard

Standard
EN 14075:2003
English language
55 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ortsfeste, geschweißte zylindrische Behälter aus Stahl, die serienmäßig für die Lagerung von Flüssiggas (LPG) hergestellt werden, mit einem Fassungsvermögen bis 13 m3 für erdgedeckte Aufstellung - Gestaltung und HerstellungRéservoirs cylindriques fixes en acier, soudés, fabriqués en série, d'un volume inférieur ou égal a 13 m3, destinés au stockage enterré des gaz de pétrole liquéfiés (GPL) - Conception et fabricationStatic welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation underground - Design and manufacture23.020.10UH]HUYRDUMLStationary containers and tanksICS:Ta slovenski standard je istoveten z:EN 14075:2002SIST EN 14075:2003en01-december-2003SIST EN 14075:2003SLOVENSKI
STANDARD



SIST EN 14075:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14075October 2002ICS 23.020.30English versionStatic welded steel cylindrical tanks, serially produced for thestorage of Liquefied Petroleum Gas (LPG) having a volume notgreater than 13 m³ and for installation underground - Design andmanufactureRéservoirs cylindriques fixes en acier, soudés, fabriqués ensérie, d'un volume inférieur ou égal à 13 m³, destinés austockage enterré des gaz de pétrole liquéfiés (GPL) -Conception et fabricationOrtsfeste, geschweißte zylindrische Behälter aus Stahl, dieserienmäßig für die Lagerung von Flüssiggas (LPG)hergestellt werden, mit einem Fassungsvermögen bis 13m3 für erdgedeckte Aufstellung - Gestaltung undHerstellungThis European Standard was approved by CEN on 14 July 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14075:2002 ESIST EN 14075:2003



EN 14075:2002 (E)2ContentspageForeword.51Scope.62Normative references.63Terms and definitions.84Materials.94.1Shells and ends.94.2Pressure parts other than shells and ends.104.3Parts welded to the tank.114.4Welding consumables.114.5Certificates.114.6Non metallic materials (gaskets).115Design.115.1General.115.2Temperature.125.3Pressure.125.4Vacuum conditions.125.5Support loadings.125.6Lifting lugs loadings.126Openings.126.1General.126.2Reinforcement.126.3Position of welds and openings.137Workmanship and manufacture.137.1General.137.2Control and traceability of materials.137.3Manufacturing tolerances.137.4Acceptable weld details.137.4.1Longitudinal welds.147.4.2Joggle joints.147.5Formed pressure parts.147.5.1General.147.5.2Heat treatment after forming.147.5.3Testing of formed parts.157.5.4Repeated tests.157.5.5Visual examination and dimensional check.167.5.6Marking.167.5.7Test certificate.167.6Welding.167.6.1General.167.6.2Welding procedure specification (WPS).167.6.3Qualification of WPS.167.6.4Qualification of welders and welding operators.167.6.5Preparation of edges to be welded.167.6.6Execution of welded joints.177.6.7Attachments and supports.177.6.8Preheating.177.7Post weld heat treatment.177.8Repairs.177.8.1Repairs of surface imperfections in the parent metal.177.8.2Repair of weld imperfections.188Non pressure attachments.188.1Attachment.18SIST EN 14075:2003



EN 14075:2002 (E)38.2Position.188.3Vent hole.189Inspection and testing.189.1Visual examination of welds.189.2Non-destructive testing.199.3Non-destructive testing techniques.199.3.1General.199.3.2Radiographic techniques.199.3.3Ultrasonic techniques.209.3.4Magnetic particle techniques.209.3.5Penetrant techniques.209.4Marking, all non destructive testing methods.209.5Qualification of personnel.209.6Acceptance criteria.209.7Production test plates (coupon plates).219.8Final assessment.239.8.1Pressure test.239.8.2Final examination.2310Surface treatment and finishing.2310.1General.2310.2Finishing operations.2411Marking and certification.2412Records and documentation.2412.1Records to be obtained by the manufacturer.2412.2Documents to be prepared by the manufacturer.25Annex A (normative)
Design pressure.26Annex B (normative)
Tolerances on tanks.27B.1Mean external diameter.27B.2Out of roundness.27B.3Deviation from the straight line.27B.4Irregularities in circular profile.27B.5Dished end tolerance.28B.6Profile.28B.7Surface alignment.29B.8Attachments, nozzles and fittings.29Annex C (normative)
Hydraulic pressure test.30C.1Temporary fittings.30C.2Pressure gauges.30C.3Pressurising agent.30C.4Avoidance of shocks.30C.5Test pressure.30Annex D (normative)
Imperfections.31Annex E (normative)
Design formulae for tanks.34E.1Allowable stresses.34E.2Design formulae.34E.2.1General.34E.2.2Cylindrical shell calculation.34E.2.3Torispherical end calculation.34E.2.4Ellipsoidal end calculation.36E.2.5Formulae for calculating C.37E.3Nozzle re-enforcement.37E.3.1General.37E.3.2Size of openings.37E.3.3Distance between openings or branches.38E.3.4Openings and branches.38E.3.5Cylindrical shells and dished ends with openings.38SIST EN 14075:2003



EN 14075:2002 (E)4E.3.6Shell reinforcement.39E.3.7Extent of reinforcement.39E.3.8Elliptical openings.39E.3.9Welded branches.39E.3.10Compensating plates.39E.3.11Reinforcement — General.39E.3.12Reinforcement by pads.40E.3.13Reinforcement by branches.40E.3.14Branch connections normal to the tank wall.40Annex F (informative)
Measurement of shell peaking.45F.1Profile gauge.45F.2Peaking survey.45Annex G (informative)
Examples of joints.48Annex H (normative)
External protection of underground tanks.52H.1General.52H.2Unmonitored protection systems.52H.3Monitored protection systems.52H.3.1Systems incorporating cathodic protection.52H.3.2Systems incorporating a protective envelope.53H.3.3Other systems.53Annex ZA (informative)
Clauses of this European Standard addressing essential requirements orother provisions of EU Directives.54Bibliography.55SIST EN 14075:2003



EN 14075:2002 (E)5ForewordThis document EN 14075:2002 has been prepared by Technical Committee CEN/TC 286 "Liquefied petroleum gasequipment and accessories", the secretariat of which is held by NSAI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest byApril 2003.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.Annexes A, B, C, D, E and H are normative and annexes F and G informative.NOTEThe design formulae quoted in this document require the use of consistent units.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 14075:2003



EN 14075:2002 (E)61 ScopeThis European Standard specifies requirements for the design and manufacture of static welded steel cylindricaltanks, serially produced for the storage of liquefied petroleum gas (LPG) with a volume not greater than 13 m3 andfor installation underground.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 287-1, Approval testing of welders — Fusion welding — Part 1: Steels.EN 288-2, Specification and approval of welding procedures for metallic materials — Part 2: Welding procedurespecification for arc welding.EN 288-3, Specification and approval of welding procedures for metallic materials — Part 3: Welding proceduretests for the arc welding of steels.EN 288-8, Specification and approval of welding procedures for metallic materials — Part 8: Approval by a pre-production welding test.EN 462, Non-destructive testing — Image quality of radiographs.EN 473, Non destructive testing — Qualification and certification of NDT personnel — General principles.EN 499, Welding consumables — Covered electrodes for manual arc welding of non-alloy and fine grain steels —Classification.EN 571-1, Non destructive testing — Penetrant testing — Part 1: General principles.EN 756, Welding consumables — Wire electrodes and wire-flux combinations for submerged arc welding of nonalloy and fine grain steels — Classification.EN 758, Welding consumables — Tubular cored electrodes for metal arc welding with and without a gas shield ofnon alloy and fine grain steels — Classification.EN 837-2, Pressure gauges — Part 2: Selection and installation recommendations for pressure gauges.EN 875, Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notchorientation and examination.EN 876, Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion weldedjoints.EN 895, Destructive tests on welds in metallic materials — Transverse tensile test.EN 910, Destructive tests on welds in metallic materials — Bend tests.EN 970, Non-destructive examination of fusion welds — Visual examination.EN 1290, Non-destructive examination of welds — Magnetic particle examination of welds.EN 1321, Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds.SIST EN 14075:2003



EN 14075:2002 (E)7EN 1418, Welding personnel — Approval testing of welding operators for fusion welding and resistance weldsetters for fully mechanized and automatic welding of metallic materials.EN 1435, Non-destructive examination of welds — Radiographic examination of welded joints.EN 1668, Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and finegrain steels — Classification.EN 1708–1, Welding - Basic weld joint details in steel — Part 1: Pressurized components.EN 1714, Non-destructive examination of welds — Ultrasonic examination of welded joints.EN 10025, Hot rolled products of non-alloy structural steels — Technical delivery conditions.EN 10028-2, Flat products made of steels for pressure purposes — Part 2: Non-alloy and alloy steels with specifiedelevated temperature properties.EN 10028-3, Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized.EN 10028-5, Flat products made of steels for pressure purposes — Part 5: Weldable fine grain steels,thermomechanically rolled.EN 10204, Metallic products — Types of inspection documents.EN 12062, Non-destructive examination of welds — General rules for metallic materials.EN 13445-2, Unfired pressure vessels — Part 2: Materials.EN 13445-3, Unfired pressure vessels — Part 3: Design.prEN 13636, Cathodic protection of buried metallic tanks and related piping.EN ISO 6520-1, Welding and allied processes — Classification of geometric imperfections in metallic materials —Part 1: Fusion welding (ISO 6520-1:1998).ISO 9162, Petroleum products — Fuels (class F) — Liquefied petroleum gases — Specifications.SIST EN 14075:2003



EN 14075:2002 (E)83 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply.3.1PEDDirective 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the lawsof the Member States concerning pressure equipment3.2yield strengthupper yield strength ReH or, for steels that do not exhibit a definite yield, the 0,2 % proof strengthNOTEThese properties are equivalent to those specified by the symbol Re/t, in the PED.3.3serially produced tanksmore than one tank manufactured in the same factory to a common design using the same material andmanufacturing procedure and produced with no major interruption within a given period of time3.4batchgroup of pressure parts or finished tanks, made consecutively by the same manufacturer using the samemanufacturing techniques to the same design, nominal size and material specifications on the same productionmachinery and subject to the sam
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.