SIST EN 13880-10:2004
(Main)Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression
Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression
This European Standard describes a method for determining the adhesion and cohesion characteristics of hot applied joint sealant specimens following continuous extension and compression bond testing.
Heiß verarbeitbare Fugenmassen - Teil 10: Prüfverfahren zur Bestimmung des Dehn- und Haftvermögens bei kontinuierlicher Dehnung und Stauchung
Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung des Adhäsions- und Kohäsionsverhaltens von Probekörpern heiß verarbeitbarer Fugenmassen durch die Prüfung des Dehn- und Haftvermögens bei kon-tinuierlicher Dehnung und Stauchung.
Produits de scellement de joints appliqués a chaud - Partie 10: Méthode d'essai pour la détermination de l'adhésion et de la cohésion apres traction et compression répétée
Cette Norme européenne décrit une méthode pour la détermination des caractéristiques d'adhésion et de cohésion d'éprouvettes de produit de scellement de joints appliqué a chaud apres des essais d'adhérence par traction et compression répétée.
Tesnilne mase za stike, ki se vgrajujejo po vročem postopku – 10. del: Preskusna metoda za ugotavljanje adhezije in kohezije po dolgotrajnem raztezanju in stiskanju
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VWLVNDQMXHeiß verarbeitbare Fugenmassen - Teil 10: Prüfverfahren zur Bestimmung des Dehn- und Haftvermögens bei kontinuierlicher Dehnung und StauchungProduits de scellement de joints appliqués a chaud - Partie 10: Méthode d'essai pour la détermination de l'adhésion et de la cohésion apres traction et compression répétéeHot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-10:2003SIST EN 13880-10:2004en01-junij-2004SIST EN 13880-10:2004SLOVENSKI
STANDARD
SIST EN 13880-10:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-10August 2003ICS 93.080.20English versionHot applied joint sealants - Part 10: Test method for thedetermination of adhesion and cohesion following continuousextension and compressionProduits de scellement de joints appliqués à chaud - Partie10: Méthode d'essai pour la détermination de l'adhésion etde la cohésion après traction et compression répétéeHeiß verarbeitbare Fugenmassen - Teil 10: Prüfverfahrenzur Bestimmung des Dehn- und Haftvermögens beikontinuierlicher Dehnung und StauchungThis European Standard was approved by CEN on 2 May 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-10:2003 ESIST EN 13880-10:2004
EN 13880-10:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Principle.45Apparatus.45.1Jig for pouring and handling of test specimen.45.2Tensile rig.55.3Cooling chamber.55.4Measurement of forces.56Preparation and conditioning of test specimens.57Procedure.68Calculation and expression of results.68.1General.68.2Failures.69Precision.610Test report.7Annex A (informative)
Bond testing after fuel immersion.8A.1Principle.8A.2Apparatus.8A.3Preparation and conditioning of test specimens.8A.4Procedure.8A.5Test report.9SIST EN 13880-10:2004
EN 13880-10:2003 (E)3ForewordThis document EN 13880-10:2003 has been prepared by Technical Committee CEN/TC 227 “Road materials”, thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2004, and conflicting national standards shall be withdrawn at the latestby March 2005.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.This European Standard is one of a series of standards as listed below:EN 13880-1, Hot applied joint sealants — Part 1: Test method for the determination of density at 25 °C.EN 13880-2, Hot applied joint sealants — Part 2: Test method for the determination of cone penetration at 25 °C.EN 13880-3, Hot applied joint sealants — Part 3: Test method for the determination of penetration and recovery(resilience).EN 13880-4, Hot applied joint selants — Part 4: Test method for the determination of heat resistance — Change inpenetration value.EN 13880-5, Hot applied joint sealants — Part 5: Test method for the determination of flow resistance.prEN 13880-6, Hot applied joint sealants — Part 6: Test method for the preparation of samples for testing.EN 13880-7, Hot applied joint sealants — Part 7: Function testing of joint sealants.EN 13880-8, Hot applied joint sealants — Part 8: Test method for the determination of the change in weight of fuelresistance joint sealants after fuel immersion.EN 13880-9, Hot applied joint sealants — Part 9: Test method for the determination of compatibility with asphaltpavements.EN 13880-10, Hot applied joint sealants — Part 10: Test method for the determination of adhesion and cohesionfollowing continuous extension and compression.EN 13880-11, Hot applied joint sealants — Part 11: Test method for the preparation of asphalt test blocks used inthe function test and for the determination of compatibility with asphalt pavements.EN 13880-12, Hot applied joint sealants — Part 12: Test method for the manufacture of concrete test blocks forbond "testing (recipe methods).EN 13880-13, Hot applied joint sealants — Part 13: Test method for the determination of the discontinuousextension (adherence test).Annexe A is informative.SIST EN 13880-10:2004
EN 13880-10:2003 (E)41 ScopeThis European Standard describes a method for determining the adhesion and cohesion characteristics of hotapplied joint sealant specimens following continuous extension and compression bond testing.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.