SIST EN ISO 3927:2017

Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017)

This document specifies methods for measuring the extent to which a metallic powder is compacted
when subjected to uniaxial compressive loading in a confining die under specified conditions.
The method is not applicable to powders for hardmetals.

Metallpulver, mit Ausnahme von Hartmetallpulvern - Bestimmung der Verdichtbarkeit bei einachsigem Pressen (ISO 3927:2017)

Poudres métalliques, à l'exclusion des poudres pour métaux-durs - Détermination de la compressibilité sous compression uniaxiale (ISO 3927:2017)

ISO 3927:2017 spécifie des méthodes de mesure de l'aptitude d'une poudre métallique à être comprimée lorsqu'elle est soumise dans une matrice à une charge de compression uniaxiale dans des conditions spécifiées.
Cette méthode n'est pas applicable aux poudres pour métaux-durs.

Kovinski praški razen praškov za trdine - Ugotavljanje stisljivosti z enoosno kompresijo (ISO 3927:2017)

Ta dokument določa metode za merjenje stisljivosti kovinskega praška z enoosno kompresijo v kalupu pod določenimi pogoji. Metoda se ne uporablja za praške trdih kovin.

General Information

• Status: Published
• Public Enquiry End Date: 18-Jul-2017
• Publication Date: 08-Oct-2017
• ICS: 77.160 - Powder metallurgy
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Oct-2017
• Due Date: 10-Dec-2017
• Completion Date: 09-Oct-2017
• Ref Project: EN ISO 3927:2017 - Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017)

Relations

• Revised: SIST EN ISO 3927:2012 - Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)
• Effective Date: 21-Dec-2016
• Replaces: SIST EN ISO 3927:2012 - Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)
• Effective Date: 04-Oct-2017
• Replaces: SIST EN ISO 3927:2012 - Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3927:2017
01-november-2017
1DGRPHãþD
SIST EN ISO 3927:2012
Kovinski praški razen praškov za trdine - Ugotavljanje stisljivosti z enoosno
kompresijo (ISO 3927:2017)
Metallic powders, excluding powders for hardmetals - Determination of compressibility in
uniaxial compression (ISO 3927:2017)
Metallpulver, mit Ausnahme von Hartmetallpulvern - Bestimmung der Verdichtbarkeit bei
einachsigem Pressen (ISO 3927:2017)
Poudres métalliques, à l'exclusion des poudres pour métaux-durs - Détermination de la
compressibilité sous compression uniaxiale (ISO 3927:2017)
Ta slovenski standard je istoveten z: EN ISO 3927:2017
ICS:
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 3927:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3927:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 3927:2017


EN ISO 3927
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2017
EUROPÄISCHE NORM
ICS 77.160 Supersedes EN ISO 3927:2011
English Version

Metallic powders, excluding powders for hardmetals -
Determination of compressibility in uniaxial compression
(ISO 3927:2017)
Poudres métalliques, à l'exclusion des poudres pour Metallpulver, mit Ausnahme von Hartmetallpulvern -
métaux-durs - Détermination de la compressibilité Bestimmung der Verdichtbarkeit bei einachsigem
sous compression uniaxiale (ISO 3927:2017) Pressen (ISO 3927:2017)
This European Standard was approved by CEN on 26 September 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3927:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3927:2017
EN ISO 3927:2017 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 3927:2017
EN ISO 3927:2017 (E)
European foreword
This document (EN ISO 3927:2017) has been prepared by Technical Committee ISO/TC 119 “Powder
metallurgy”.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall
be withdrawn at the latest by March 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3927:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3927:2017 has been approved by CEN as EN ISO 3927:2017 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 3927:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 3927:2017
INTERNATIONAL ISO
STANDARD 3927
Fifth edition
2017-09
Metallic powders, excluding powders
for hardmetals — Determination
of compressibility in uniaxial
compression
Poudres métalliques, à l'exclusion des poudres pour métaux-durs —
Détermination de la compressibilité sous compression uniaxiale
Reference number
ISO 3927:2017(E)
©
ISO 2017

---------------------- Page: 7 ----------------------

SIST EN ISO 3927:2017
ISO 3927:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 3927:2017
ISO 3927:2017(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols . 1
5 Principle . 1
6 Apparatus . 2
7 Sampling . 5
8 Procedure. 5
8.1 Cleaning of the die and punches . 5
8.2 Powder testing conditions . 5
8.3 Lubrication . 6
8.3.1 General. 6
8.3.2 Die wall lubrication . 6
8.3.3 Lubrication of powder . 6
8.4 Compacting and ejection . 6
8.5 Compacting pressures . 6
9 Expression of results . 8
10 Precision . 8
11 Test report . 8
Bibliography . 9
© ISO 2017 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 3927:2017
ISO 3927:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its
...