SIST EN 62683:2013
(Main)Low-voltage switchgear and controlgear - Product data and properties for information exchange (IEC 62683:2013)
Low-voltage switchgear and controlgear - Product data and properties for information exchange (IEC 62683:2013)
This International Standard is used to facilitate the exchange in electronic format of data describing low-voltage switchgear and controlgear. This standard provides clear and unambiguous definitions of a limited number of properties and classes which are mainly used for presentation, selection and identification of products particularly in electronic catalogues. Each property has an unambiguously defined meaning and naming, and where relevant, a defined value list, a defined format and a defined unit. The intention is to produce a reference dictionary which allows a general description of low-voltage switchgear and controlgear classes based on the defined properties. The intention is not to cover manufacturer specific features.
Niederspannungsschaltgeräte - Produktdaten und -eigenschaften für den Informationsaustausch (IEC 62683:2013)
Appareillage à basse tension - Données et propriétés de produit pour l'échange d'information (CEI 62683:2013)
La CEI 62683:2013 a pour but de faciliter l'échange sous format électronique de données décrivant les appareillages à basse tension. La présente norme propose des définitions claires et sans équivoque d'un certain nombre de classes et de propriétés permettant notamment de présenter, de sélectionner et d'identifier des produits, en particulier dans les catalogues électroniques. Chaque propriété a une signification et une appellation définies sans ambiguïté et le cas échéant, un domaine de valeur défini, un format défini et une unité définie. L'objectif est de créer un dictionnaire (référentiel) permettant une description générale des classes d'appareillage à basse tension basée sur des jeux de propriétés définies. L'objectif n'est pas de traiter de fonctions spécifiques aux constructeurs.
Nizkonapetostne stikalne in krmilne naprave - Podatki o izdelku in njegovih lastnostih za izmenjavo informacij (IEC 62683:2013)
Ta mednarodni standard omogoča izmenjavo podatkov v elektronski obliki za opis nizkonapetostnih stikalnih in krmilnih naprav. Ta standard zagotavlja jasne in nedvoumne definicije omejenega števila lastnosti in razredov, ki se običajno uporabljajo za predstavitev, izbiro in identifikacijo izdelkov, še posebej v elektronskih katalogih. Vsaka lastnost ima nedvoumno opredeljen pomen in poimenovanje in, kjer je ustrezno, opredeljen vrednostni seznam, opredeljeno obliko in opredeljeno enoto. Namen je sestava referenčnega slovarja, ki zagotavlja splošen opis razredov nizkonapetostnih stikalnih in krmilnih naprav na podlagi opredeljenih lastnosti. Zajemanje posebnih lastnosti proizvajalca ni del namena tega standarda.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62683:2013
01-julij-2013
Nizkonapetostne stikalne in krmilne naprave - Podatki o izdelku in njegovih
lastnostih za izmenjavo informacij (IEC 62683:2013)
Low-voltage switchgear and controlgear - Product data and properties for information
exchange (IEC 62683:2013)
Niederspannungsschaltgeräte - Produktdaten und -eigenschaften für den
Informationsaustausch (IEC 62683:2013)
Appareillage à basse tension - Données et propriétés de produit pour l'échange
d'information (CEI 62683:2013)
Ta slovenski standard je istoveten z: EN 62683:2013
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN 62683:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62683:2013
---------------------- Page: 2 ----------------------
SIST EN 62683:2013
EUROPEAN STANDARD
EN 62683
NORME EUROPÉENNE
May 2013
EUROPÄISCHE NORM
ICS 29.130.20
English version
Low-voltage switchgear and controlgear -
Product data and properties for information exchange
(IEC 62683:2013)
Appareillage à basse tension - Niederspannungsschaltgeräte -
Données et propriétés de produits pour Produktdaten und -eigenschaften für den
l'échange d'informations Informationsaustausch
(CEI 62683:2013) (IEC 62683:2013)
This European Standard was approved by CENELEC on 2013-04-15. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62683:2013 E
---------------------- Page: 3 ----------------------
SIST EN 62683:2013
EN 62683:2013 - 2 -
Foreword
The text of document 17B/1802/FDIS, future edition 1 of IEC 62683, prepared by SC 17B, "Low-voltage
switchgear and controlgear", of IEC TC 17, "Switchgear and controlgear" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62683:2013.
The following dates are fixed:
• latest date by which the document has (dop) 2014-01-15
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-04-15
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62683:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60715 NOTE Harmonised as EN 60715.
IEC 60947-3 NOTE Harmonised as EN 60947-3.
IEC 60947-4-2 NOTE Harmonised as EN 60947-4-2.
IEC 60947-5-1:2003 NOTE Harmonised as EN 60947-5-1:2004 (not modified).
IEC 60947-5-2:2007 NOTE Harmonised as EN 60947-5-2:2007 (not modified).
IEC 60947-5-5:1997 NOTE Harmonised as EN 60947-5-5:1997 + A1:2005 (not modified).
+ A1:2005
IEC 60947-6-1:2005 NOTE Harmonised as EN 60947-6-1:2005 (not modified).
IEC 60947-6-2 NOTE Harmonised as EN 60947-6-2.
IEC 60947-7-2:2009 NOTE Harmonised as EN 60947-7-2:2009 (not modified).
IEC 60947-7-3:2009 NOTE Harmonised as EN 60947-7-3:2009 (not modified).
IEC 60947-8 NOTE Harmonised as EN 60947-8.
IEC 61095 NOTE Harmonised as EN 61095.
IEC 61987-10 NOTE Harmonised as EN 61987-10.
ISO 13850:2006 NOTE Harmonised as EN ISO 13850:2008 (not modified).
ISO 14025 NOTE Harmonised as EN ISO 14025.
---------------------- Page: 4 ----------------------
SIST EN 62683:2013
- 3 - EN 62683:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60947-1 2007 Low-voltage switchgear and controlgear - EN 60947-1 2007
Part 1: General rules
IEC 61360-1 - Standard data elements types with associated EN 61360-1 -
classification scheme for electric items -
Part 1: Definitions - Principles and methods
---------------------- Page: 5 ----------------------
SIST EN 62683:2013
---------------------- Page: 6 ----------------------
SIST EN 62683:2013
IEC 62683
®
Edition 1.0 2013-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage switchgear and controlgear – Product data and properties for
information exchange
Appareillage à basse tension – Données et propriétés de produits pour
l’échange d’informations
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XA
ICS 29.130.20 ISBN 978-2-83220-683-6
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 62683:2013
– 2 – 62683 © IEC:2013
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 General . 9
5 Properties . 9
5.1 Criteria for naming properties . 9
5.2 Attributes of a property . 9
6 Block of properties . 10
7 Device classes . 10
7.1 Device class attributes . 10
7.2 Library of low-voltage switchgear and controlgear classes . 10
7.3 Properties of device classes . 16
7.3.1 General . 16
7.3.2 Motor starter combination . 17
7.3.3 Motor protection circuit-breaker . 18
7.3.4 Power contactor, a.c. switching . 19
7.3.5 Power contactor, d.c. switching . 20
7.3.6 Capacitor contactor . 22
7.3.7 Combination of contactors . 23
7.3.8 Electromechanical contactor for household and similar purposes. 24
7.3.9 Thermal overload relay . 25
7.3.10 Electronic overload relay . 26
7.3.11 Relay for thermistor protection (PTC) . 27
7.3.12 Motor management device . 28
7.3.13 Motor management device, extension module . 29
7.3.14 Motor management device, operator panel . 30
7.3.15 Semiconductor motor controller . 31
7.3.16 Transfer switching equipment . 32
7.3.17 Inductive proximity switch . 32
7.3.18 Capacitive proximity switch . 32
7.3.19 Non-mechanical magnetic proximity switch . 32
7.3.20 Ultrasonic proximity switch . 32
7.3.21 Through beam photoelectric proximity switch . 32
7.3.22 Retroreflective photoelectric proximity switch . 32
7.3.23 Diffuse reflective photoelectric proximity switch . 32
7.3.24 Diffuse reflective photoelectric proximity switch with background
suppression . 32
7.3.25 Auxiliary contact block . 32
7.3.26 Contactor relay . 33
7.3.27 Position switch . 33
7.3.28 Rotary limit switch . 33
7.3.29 Safety position switch with separate actuator. 33
7.3.30 Safety position switch with interlocking . 33
7.3.31 Trip wire switch . 33
---------------------- Page: 8 ----------------------
SIST EN 62683:2013
62683 © IEC:2013 – 3 –
7.3.32 Hinge switch . 33
7.3.33 Push-button . 33
7.3.34 Rotary control switch . 33
7.3.35 Key-operated rotary switch . 33
7.3.36 Joy stick . 33
7.3.37 Foot switch . 33
7.3.38 Emergency stop device. 33
7.3.39 Signal light . 33
7.3.40 Signal tower . 33
7.3.41 Circuit-breaker . 34
7.3.42 Release for circuit-breaker . 34
7.3.43 Residual current release for circuit-breaker . 34
7.3.44 Shunt release for circuit-breaker . 34
7.3.45 Under-voltage release for circuit-breaker . 34
7.3.46 Motor-operator for circuit-breaker . 34
7.3.47 Switch-disconnector . 34
7.3.48 Switch-disconnector-fuse . 34
7.3.49 Fuse-switch-disconnector . 34
7.3.50 Feed-through terminal block . 34
7.3.51 Distribution terminal block . 34
7.3.52 Disconnect terminal block . 34
7.3.53 Protective conductor terminal block . 34
7.3.54 Fuse terminal block . 34
Annex A (normative) Property library . 35
Annex B (informative) Example of structured data . 50
Bibliography . 52
Table 1 – Library of blocks used in the device classes of low-voltage switchgear . 10
Table 2 – Library of device classes for contactors, starters and similar equipment . 11
Table 3 – Library of device classes for control switches . 13
Table 4 – Library of device classes for circuit-breakers and their associated devices . 15
Table 5 – Library of device classes for switches, disconnectors and similar equipment . 16
Table 6 – Library of device classes for multiple function equipment . 16
Table 7 – Library of device classes for terminal blocks. 16
Table 8 – Properties of motor starter combination . 17
Table 9 – Properties of motor protection circuit-breaker . 18
Table 10 – Properties of power contactor, a.c. switching . 19
Table 11 – Properties of power contactor, d.c. switching . 20
Table 12 – Properties of capacitor contactor . 22
Table 13 – Properties of combination of contactors . 23
Table 14 – Properties of electromechanical contactor for household and similar
purposes . 24
Table 15 – Properties of thermal overload relay . 25
Table 16 – Properties of electronic overload relay. 26
Table 17 – Properties of relay for thermistor protection . 27
Table 18 – Properties of motor management device . 28
---------------------- Page: 9 ----------------------
SIST EN 62683:2013
– 4 – 62683 © IEC:2013
Table 19 – Properties of motor management device, extension module . 29
Table 20 – Properties of motor management device, operator panel . 30
Table 21 – Properties of semiconductor motor controller . 31
Table A.1 – Library of properties used in the device classes of low-voltage switchgear
and controlgear . 35
Table B.1 – Structured properties of motor starter combination . 50
---------------------- Page: 10 ----------------------
SIST EN 62683:2013
62683 © IEC:2013 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR –
PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62683 has been prepared by the subcommittee 17B: Low-voltage
switchgear and controlgear, of the IEC technical committee 17: Switchgear and controlgear.
The text of this standard is based on the following documents:
FDIS Report on voting
17B/1802/FDIS 17B/1816/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 11 ----------------------
SIST EN 62683:2013
– 6 – 62683 © IEC:2013
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 12 ----------------------
SIST EN 62683:2013
62683 © IEC:2013 – 7 –
INTRODUCTION
Mainly large customers and wholesalers are requesting standardized product descriptions and
product properties. However, all stakeholders will benefit from this standardised presentation
and data exchange.
Multiple associations or groups of actors launched different initiatives to try to respond to this
demand but, due to the lack of standardisation of classes and properties, the situation is not
satisfactory neither for customers nor for manufacturers.
In order to keep the lead of product description, IEC proposes a new consistent solution
within its product standards.
The purpose of this International Standard is to:
• define device classes and properties for low-voltage switchgear and controlgear in a
dedicated standard,
• provide a basis for introduction of the low-voltage switchgear and controlgear classes and
properties into the IEC 61360 database maintained by IEC/SC3D (see
http://std.iec.ch/iec61360).
This standard is not intended to establish a hierarchy of product classes called classification.
The intended benefits of this standard are to:
• reduce the costs, time and efforts of mapping data for each customer request;
• optimize the workflow of B2B exchanges;
• minimize duplication of articles in customer inventories and in databases;
• minimize losses and misinterpretation of data during exchanges;
• facilitate the selection of a product, especially regarding reliability and safety;
• give access to product data everywhere regardless of country, language and culture;
• provide product data related to environmental aspects such as material declaration;
• contribute to the fast growth of the e-business by simplifying the development of
– e-Catalogue allowing the differentiation of products performances, certificates, etc;
– e-Commerce: use of electronic networks to exchange information, products, services
and payments for commercial and communication purposes between individuals
(consumers) and businesses, between businesses themselves.
The output of this standard consists of:
• reference dictionary of low-voltage switchgear and controlgear using existing terms from
IEC standards. However, terminology used in e-business may be relevant for the purpose
of naming classes in this standard to get a high level of acceptance;
• properties for e-commerce purposes, conformity of properties with product standards
being the main goal of this standard.
NOTE The classes "under consideration" are for information only and are intended to be completed during the
next maintenance cycle.
For this project, the introduction of low-voltage switchgear and controlgear within the
IEC 61360 database needs to address the following technical aspect:
• IEC 61360 requires mandatory attributes. The complete set of mandatory attributes with
additional relevant attributes for low-voltage switchgear and controlgear will be available
within the IEC 61360 database. Within the present document, only the most useful
attributes will be presented;
• the switchgear and controlgear data model is implemented in an appropriate domain of the
IEC Component Data Dictionary (CDD), IEC 61360, by creating dictionaries of blocks,
classes and properties. A device class is therefore created using reference links to these
dictionaries.
---------------------- Page: 13 ----------------------
SIST EN 62683:2013
– 8 – 62683 © IEC:2013
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR –
PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE
1 Scope
This International Standard is used to facilitate the exchange in electronic format of data
describing low-voltage switchgear and controlgear.
This standard provides clear and unambiguous definitions of a limited number of properties
and classes which are mainly used for presentation, selection and identification of products
particularly in electronic catalogues.
Each property has an unambiguously defined meaning and naming, and where relevant, a
defined value list, a defined format and a defined unit.
The intention is to produce a reference dictionary which allows a general description of
low-voltage switchgear and controlgear classes based on the defined properties. The
intention is not to cover manufacturer specific features.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60947-1:2007, Low-voltage switchgear and controlgear − Part 1: General rules
IEC 61360-1, Standard data element types with associated classification scheme for electric
items − Part 1: Definitions − Principles and methods
3 Terms and definitions
For the purposes of this document, the terms and definitions of IEC 60947-1, as well as the
following terms and definitions apply.
3.1
attribute
data element for description of a property, a relation or a device class
EXAMPLE The name of a property, the code of a class, the measure unit of a property.
3.2
block (of properties)
collection of properties describing one common aspect of the device class
Note 1 to entry: A block is a feature class in the sense of IEC 61360-1 and ISO 13584-42.
EXAMPLE Diagnostic functions, control circuit.
3.3
cardinality
pattern defining the number of times a concept reoccurs within a description
---------------------- Page: 14 ----------------------
SIST EN 62683:2013
62683 © IEC:2013 – 9 –
Note 1 to entry: Cardinality allows a block of properties contained in a list of properties to be used more than
once for a particular transaction in order to describe, for example, a device with several different outputs or more
than one process cases.
Note 2 to entry: Cardinality is defined by IEC 61987-10.
3.4
device
material element or assembly of such elements intended to perform a required function
Note 1 to entry: In this standard, a device corresponds to a low voltage switchgear and controlgear.
[SOURCE: IEC 60050-151:2001, 151-11-20, modified – replacement of the note]
3.5
device class
set of properties which gives a description of a device
3.6
polymorphism
pattern that allows substitution of a single concept in the same context by a different more
specific (specialized) concept
Note 1 to entry: A specialised polymorphic block of properties can replace a more generic one in the same
context. A polymorphic operator (control property) can act in selecting between of various specialisations.
Note 2 to entry: Polymorphism is defined by IEC 61987-10.
3.7
property
defined parameter suitable for the description and differentiation of device class
specific characteristic describing an aspect of device class
4 General
The attributes shall follow IEC 61360-1.
Based on IEC 61360-1 data model, the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.