SIST EN ISO 3164:2013/A1:2024
(Amendment)Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume - Amendment 1 (ISO 3164:2013/Amd 1:2024)
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume - Amendment 1 (ISO 3164:2013/Amd 1:2024)
2021-01-12 TC provided the Annex ZA. CCMC requested the Enquriy assessment.
2021-01-11 JF: CCMC requested the CEN/TC to provide the Annex ZA which is needed in order to request an Enquiry assessment.
Erdbaumaschinen - Prüfung von Schutzaufbauten - Verformungsgrenzbereich - Änderung 1 (ISO 3164:2013/Amd 1:2024)
No scope available
Engins de terrassement - Étude en laboratoire des structures de protection - Spécifications pour le volume limite de déformation - Amendement 1 (ISO 3164:2013/Amd 1:2024)
Stroji za zemeljska dela - Laboratorijsko ovrednotenje zaščite - Mejno področje deformacije - Dopolnilo A1 (ISO 3164:2013/Amd 1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3164:2013/A1:2024
01-julij-2024
Stroji za zemeljska dela - Laboratorijsko ovrednotenje zaščite - Mejno področje
deformacije - Dopolnilo A1 (ISO 3164:2013/Amd 1:2024)
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications
for deflection-limiting volume - Amendment 1 (ISO 3164:2013/Amd 1:2024)
Erdbaumaschinen - Prüfung von Schutzaufbauten - Verformungsgrenzbereich -
Änderung 1 (ISO 3164:2013/Amd 1:2024)
Engins de terrassement - Étude en laboratoire des structures de protection -
Spécifications pour le volume limite de déformation - Amendement 1 (ISO
3164:2013/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 3164:2013/A1:2024
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 3164:2013/A1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3164:2013/A1:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 3164:2013/A1:2024
EN ISO 3164:2013/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 53.100
English Version
Earth-moving machinery - Laboratory evaluations of
protective structures - Specifications for deflection-
limiting volume - Amendment 1 (ISO 3164:2013/Amd
1:2024)
Engins de terrassement - Étude en laboratoire des Erdbaumaschinen - Prüfung von Schutzaufbauten -
structures de protection - Spécifications pour le Verformungsgrenzbereich - Änderung 1 (ISO
volume limite de déformation - Amendement 1 (ISO 3164:2013/Amd 1:2024)
3164:2013/Amd 1:2024)
This amendment A1 modifies the European Standard EN ISO 3164:2013; it was approved by CEN on 8 December 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3164:2013/A1:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3164:2013/A1:2024
EN ISO 3164:2013/A1:2024 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive2006/42/EC aimed to be covered . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3164:2013/A1:2024
EN ISO 3164:2013/A1:2024 (E)
European foreword
This document (EN ISO 3164:2013/A1:2024) has been prepared by Technical Committee ISO/TC 127
"Earth-moving machinery" in collaboration with Technical Committee CEN/TC 151 “Construction
equipment and building material machines - Safety” the secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 3164:2013 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2024,
and conflicting national standards shall be withdrawn at the latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document
...
SLOVENSKI STANDARD
SIST EN ISO 3164:2014/oprA1:2021
01-marec-2021
Stroji za zemeljska dela - Laboratorijsko ovrednotenje zaščite - Mejno področje
deformacije - Dopolnilo A1 (ISO 3164:2013/DAM 1:2020)
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications
for deflection-limiting volume - Amendment 1 (ISO 3164:2013/DAM 1:2020)
Erdbaumaschinen - Prüfung von Schutzaufbauten - Verformungsgrenzbereich -
Änderung 1 (ISO 3164:2013/DAM 1:2020)
Engins de terrassement - Étude en laboratoire des structures de protection -
Spécifications pour le volume limite de déformation - Amendement 1 (ISO
3164:2013/DAM 1:2020)
Ta slovenski standard je istoveten z: EN ISO 3164:2013/prA1
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 3164:2014/oprA1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3164:2014/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 3164:2014/oprA1:2021
DRAFT AMENDMENT
ISO 3164:2013/DAM 1
ISO/TC 127/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
2021-01-01 2021-03-26
Earth-moving machinery — Laboratory evaluations of
protective structures — Specifications for deflection-
limiting volume
AMENDMENT 1
Engins de terrassement — Étude en laboratoire des structures de protection — Spécifications pour le
volume limite de déformation
AMENDEMENT 1
ICS: 53.100
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 3164:2013/DAM 1:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021
---------------------- Page: 3 ----------------------
SIST EN ISO 3164:2014/oprA1:2021
ISO 3164:2013/DAM 1:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 3164:2014/oprA1:2021
ISO 3164:2013/DAM 1:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.