SIST EN IEC 61158-4-2:2023

Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements (IEC 61158-4-2:2023)

IEC 61158-4-2:2023 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the "three-layer" fieldbus reference model described in IEC 61158‑1.
The data-link protocol provides the data-link service by making use of the services available from the physical layer. The primary aim of this document is to provide a set of rules for communication expressed in terms of the procedures to be carried out by peer data-link entities (DLEs) at the time of communication. These rules for communication are intended to provide a sound basis for development in order to serve a variety of purposes:
- as a guide for implementers and designers;
- for use in the testing and procurement of equipment;
- as part of an agreement for the admittance of systems into the open systems environment;
- as a refinement to the understanding of time-critical communications within OSI.

Industrielle Kommunikationsnetze - Feldbusse – Teil 4-2: Protokollspezifikation des Data Link Layer (Sicherungsschicht) - Typ 2-Elemente (IEC 61158-4-2:2023)

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 4-2: Spécification du protocole de la couche liaison de données - Éléments de type 2 (IEC 61158-4-2:2023)

L'IEC 61158-4-2:2023 appartient à la série de normes visant à faciliter l’interconnexion des composants du système d’automatisation. Elle est liée aux autres normes de la série telle que définie par le modèle de référence de bus de terrain "à trois couches" décrit dans l’IEC 61158‑1.
Le protocole de liaison de données assure un service de liaison de données en s’appuyant sur les services offerts par la couche physique. Le présent document a pour principal objet de préciser un ensemble de règles de communication, exprimées sous la forme de procédures que doivent réaliser des entités de liaison de données homologues (DLE) au moment de la communication. Ces règles de communication ont pour vocation de fournir une base de développement stable visant à atteindre différents objectifs:
guider les implémenteurs et les concepteurs;
réaliser les essais et acquérir l’équipement;
dans un accord d’intégration des systèmes dans l’environnement de systèmes ouverts;
dans le cadre d’une meilleure compréhension des communications prioritaires au sein de l’OSI.

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 4-2. del: Specifikacija protokola na ravni podatkovne povezave - Elementi tipa 2 (IEC 61158-4-2:2023)

Standard IEC 61158-4-2:2023 spada v skupino standardov, namenjenih za lažje medsebojno povezovanje sestavnih delov avtomatizacijskega sistema. Povezan je z drugimi standardi v sklopu, kot je opredeljeno z referenčnim modelom procesnih vodil »s tremi ravnmi« iz standarda IEC 61158-1.
Protokol podatkovnih povezav zagotavlja opravilo podatkovne povezave z uporabo opravil, ki so na voljo na fizični ravni. Primarni cilj tega dokumenta je zagotoviti nabor pravil za komunikacijo, izraženih v smislu postopkov, ki jih morajo izvesti entitete vrstnikov podatkovne povezave (DLE) v času komunikacije. Ta pravila za komunikacijo so namenjena zagotavljanju trdne podlage za razvoj za različne namene:
– kot vodilo za izvajalce in projektante;
– za uporabo pri preskušanju in nabavi opreme;
– kot del dogovora za sprejem sistemov v okolje odprtih sistemov;
– za boljše razumevanje časovno kritičnih komunikacij znotraj OSI.

General Information

• Status: Published
• Publication Date: 05-Oct-2023
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.20 - Data link layer
• ICS: 35.110 - Networking
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 04-Jul-2023
• Due Date: 08-Sep-2023
• Completion Date: 06-Oct-2023
• Ref Project: EN IEC 61158-4-2:2023 - Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements

Relations

• Revised: SIST EN IEC 61158-4-2:2019 - Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements (IEC 61158-4-2:2019)
• Effective Date: 01-Feb-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61158-4-2:2023
01-november-2023
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 4-2. del:
Specifikacija protokola na ravni podatkovne povezave - Elementi tipa 2 (IEC 61158-
4-2:2023)
Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer
protocol specification - Type 2 elements (IEC 61158-4-2:2023)
Industrielle Kommunikationsnetze - Feldbusse – Teil 4-2: Protokollspezifikation des Data
Link Layer (Sicherungsschicht) - Typ 2-Elemente (IEC 61158-4-2:2023)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 4-2:
Spécification du protocole de la couche liaison de données - Éléments de type 2 (IEC
61158-4-2:2023)
Ta slovenski standard je istoveten z: EN IEC 61158-4-2:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
SIST EN IEC 61158-4-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61158-4-2:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 61158-4-2:2023


EUROPEAN STANDARD EN IEC 61158-4-2

NORME EUROPÉENNE

EUROPÄISCHE NORM April 2023
ICS 25.040.40; 35.100.20; 35.110 Supersedes EN IEC 61158-4-2:2019
English Version
Industrial communication networks - Fieldbus specifications -
Part 4-2: Data-link layer protocol specification - Type 2 elements
(IEC 61158-4-2:2023)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse – Teil 4-2:
bus de terrain - Partie 4-2: Spécification du protocole de la Protokollspezifikation des Data Link Layer
couche liaison de données - Éléments de type 2 (Sicherungsschicht) - Typ 2-Elemente
(IEC 61158-4-2:2023) (IEC 61158-4-2:2023)
This European Standard was approved by CENELEC on 2023-04-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61158-4-2:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61158-4-2:2023
EN IEC 61158-4-2:2023 (E)
European foreword
The text of document 65C/1202/FDIS, future edition 5 of IEC 61158-4-2, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61158-4-2:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-01-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-04-13
document have to be withdrawn

This document supersedes EN IEC 61158-4-2:2019 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61158-4-2:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard ind
...