SIST EN 60684-3-400 to 402:2004
(Main)Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating
Gives the requirements for three types of E-type glass sleeving using either braided or knitted construction, with a continuous silicone elastomer coating and differentiated by their breakdown voltage (sheet 400: high breakdown voltage; sheet 401: medium breakdown voltage; sheet 402: low breakdown voltage). These sleevings have been found suitable for temperatures up to 180 °C.
Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.
Isolierschläuche -- Teil 3: Anforderungen für einzelne Schlauchtypen -- Blätter 400 bis 402: Glasfilament-Textilschläuche mit Siliconelastomerbeschichtung
Gaines isolantes souples -- Partie 3: Spécifications pour types particuliers de gaines -- Feuilles 400 à 402: Gaines en fibre de verre tissées, avec revêtement en élastomère silicone
Donne les exigences relatives aux trois types de gaines en fibre de verre de type E tressées ou tricotées, avec un revêtement continu en élastomère silicone et qui se différencient par leur tension de claquage (feuille 400: tension de claquage élevée; feuille 401: tension de claquage moyenne; feuille 402: tension de claquage faible). Ces gaines peuvent être utilisées à des températures allant jusqu'à 180 °C.
Les matériaux conformes à cette spécification satisfont à des niveaux établis de performance. Cependant, il convient que le choix d'un matériau par un utilisateur pour une application spécifique soit fondé sur les exigences réelles nécessaires pour une performance adéquate de cette application, et non fondé sur cette seule spécification.
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - Listi od 400 do 402: Steklo tekstilne cevi s silikon elastomerno prevleko (IEC 60684-3-400 to 402:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60684-3-400 to
402:2004
STANDARD
september 2004
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - Listi od
400 do 402: Steklo tekstilne cevi s silikon elastomerno prevleko (IEC 60684-3-
400 to 402:2002)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving -
Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC
60684-3-400 to 402:2002)
ICS 29.035.30 Referenčna številka
SIST EN 60684-3-400 to 402:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60684-3-400 to 402
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2002
ICS 29.035.20 Supersedes HD 523.3.400 to 402 S1:1993
English version
Flexible insulating sleeving
Part 3: Specifications for individual types of sleeving
Sheets 400 to 402: Glass textile sleeving
with silicone elastomer coating
(IEC 60684-3-400 to 402:2002)
Gaines isolantes souples Isolierschläuche
Partie 3: Spécifications pour types Teil 3: Anforderungen für einzelne
particuliers de gaines Schlauchtypen
Feuilles 400 à 402: Gaines en fibre Blätter 400 bis 402: Glasfilament-
de verre tissées, avec revêtement Textilschläuche mit
en élastomère silicone Siliconelastomerbeschichtung
(CEI 60684-3-400 to 402:2002) (IEC 60684-3-400 to 402:2002)
This European Standard was approved by CENELEC on 2002-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60684-3-400 to 402:2002 E
---------------------- Page: 2 ----------------------
EN 60684-3-400 to 402:2002 - 2 -
Foreword
The text of document 15C/1358/FDIS, future edition 2 of IEC 60684-3-400 to 402, prepared by
SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 60684-3-400 to 402 on 2002-09-01.
This European Standard supersedes HD 523.3.400 to 402 S1:1993.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-09-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60684-3-400 to 402:2002 was approved by CENELEC as a
European Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60684-3-400 to 402:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60684-1 1980 Specification for flexible insulating EN 60684-1 1995
sleeving
Part 1: Definitions and general
requirements
IEC 60684-2 1997 Flexible insulating sleeving EN 60684-2 1997
Part 2: Methods of test
IEC 60757 1983 Code for designation of colours HD 457 S1 1985
ISO 846 1997 Plastics - Evaluation of the action of EN ISO 846 1997
microorganisms
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE IEC
60684-3-400
INTERNATIONAL
à/to 402
STANDARD
Deuxième édition
Second edition
2002-06
Gaines isolantes souples –
Partie 3:
Spécifications pour types particuliers de gaines –
Feuilles 400 à 402: Gaines en fibre de verre
tissées, avec revêtement en élastomère silicone
Flexible insulating sleeving –
Part 3:
Specifications for individual types of sleeving –
Sheets 400 to 402: Glass textile sleeving with
silicone elastomer coating
IEC 2002 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
J
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 5 ----------------------
60684-3-400 to 402 IEC:2002 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FLEXIBLE INSULATING SLEEVING –
Part 3: Specifications for individual types of sleeving –
Sheets 400 to 402: Glass textile sleeving
with silicone elastomer coating
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60684-3-400 to 402 has been prepared by subcommittee 15C:
Specifications, of IEC technical committee 15: Insulating materials.
This second edition cancels and replaces the first edition (1991) and constitutes a technical
revision.
The text of this standard is based on the following documents:
FDIS Report on vo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.