SIST EN ISO 2812-3:2019

Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2019)

This document specifies a method, using an absorbent medium, for determining the resistance of
an individual-layer or multi-layer system of coating materials to the effects of liquids or paste-like
products.
This method enables the tester to determine the effects of the test substance on the coating and, if
necessary, to assess the damage to the substrate.

Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 3: Verfahren mit einem saugfähigen Material (ISO 2812-3:2019)

Dieses Dokument legt ein Verfahren zum Bestimmen der Beständigkeit einer einzelnen Schicht oder eines Mehrschichtsystems aus Beschichtungsstoffen gegen die Einwirkung von Flüssigkeiten oder pastenförmigen Produkten mittels eines saugfähigen Materials fest.
Dieses Verfahren ermöglicht dem Prüfer, die Wirkung der Prüfsubstanz auf die Beschichtung und, falls not¬wendig, die Schädigung des Substrates zu beurteilen.

Peintures et vernis - Détermination de la résistance aux liquides - Partie 3: Méthode utilisant un milieu absorbant (ISO 2812-3:2019)

Le présent document spécifie une méthode utilisant un milieu absorbant pour déterminer la résistance d'un système de revêtement monocouche ou multicouche à l'action de liquides ou de produits pâteux.
Cette méthode permet aux opérateurs d'évaluer les effets de la substance d'essai sur le revêtement et, si nécessaire, d'évaluer la détérioration du subjectile.

Barve in laki - Ugotavljanje odpornosti proti tekočinam - 3. del: Metoda z vpojnim materialom (ISO 2812-3:2019)

Ta dokument določa metodo z vpojnim materialom za ugotavljanje odpornosti posamezne plasti ali večplastnih sistemov premazov proti učinkom tekočin ali izdelkov, podobnih pasti. Ta metoda preskuševalcu omogoča določiti učinke preskušane snovi na premaz in po potrebi oceniti škodo na podlagi.

General Information

• Status: Published
• Public Enquiry End Date: 04-Mar-2019
• Publication Date: 06-Jun-2019
• ICS: 87.040 - Paints and varnishes
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 22-May-2019
• Due Date: 27-Jul-2019
• Completion Date: 07-Jun-2019
• Ref Project: EN ISO 2812-3:2019 - Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2019)

Relations

• Replaces: SIST EN ISO 2812-3:2012 - Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012)
• Effective Date: 01-Jul-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2812-3:2019
01-julij-2019
Nadomešča:
SIST EN ISO 2812-3:2012
Barve in laki - Ugotavljanje odpornosti proti tekočinam - 3. del: Metoda z vpojnim
materialom (ISO 2812-3:2019)
Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an
absorbent medium (ISO 2812-3:2019)
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 3:
Verfahren mit einem saugfähigen Material (ISO 2812-3:2019)
Peintures et vernis - Détermination de la résistance aux liquides - Partie 3: Méthode
utilisant un milieu absorbant (ISO 2812-3:2019)
Ta slovenski standard je istoveten z: EN ISO 2812-3:2019
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 2812-3:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2812-3:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 2812-3:2019


EN ISO 2812-3
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2019
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 2812-3:2012
English Version

Paints and varnishes - Determination of resistance to
liquids - Part 3: Method using an absorbent medium (ISO
2812-3:2019)
Peintures et vernis - Détermination de la résistance Beschichtungsstoffe - Bestimmung der Beständigkeit
aux liquides - Partie 3: Méthode utilisant un milieu gegen Flüssigkeiten - Teil 3: Verfahren mit einem
absorbant (ISO 2812-3:2019) saugfähigen Material (ISO 2812-3:2019)
This European Standard was approved by CEN on 9 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2812-3:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2812-3:2019
EN ISO 2812-3:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 2812-3:2019
EN ISO 2812-3:2019 (E)
European foreword
This document (EN ISO 2812-3:2019) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards
shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2812-3:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 2812-3:2019 has been approved by CEN as EN ISO 2812-3:2019 without any
modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 2812-3:2019

---------------------- Page: 6 ----------------------

SIST EN ISO 2812-3:2019
INTERNATIONAL ISO
STANDARD 2812-3
Third edition
2019-04
Paints and varnishes — Determination
of resistance to liquids —
Part 3:
Method using an absorbent medium
Peintures et vernis — Détermination de la résistance aux liquides —
Partie 3: Méthode utilisant un milieu absorbant
Reference number
ISO 2812-3:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------

SIST EN ISO 2812-3:2019
ISO 2812-3:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 2812-3:2019
ISO 2812-3:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus and materials. 2
6 Test substances . 2
7 Sampling . 2
8 Test panels . 2
8.1 Substrate . 2
8.2 Preparation and coating . . 2
8.3 Coating thickness . 2
9 Procedure. 3
9.1 Conditioning of the test panels . 3
9.2 Test conditions . 3
9.3 Determination . 3
10 Evaluation . 3
11 Precision . 4
12 Test report . 4
Annex A (informative) Examples of test substances . 5
Bibliography . 7
© ISO 2019 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 2812-3:2019
ISO 2812-3:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
This third edition cancels and replaces the second edition (ISO 2812-3:2012), of which it constitutes a
minor
...

SLOVENSKI STANDARD
oSIST prEN ISO 2812-3:2019
01-februar-2019
%DUYHLQODNL8JRWDYOMDQMHRGSRUQRVWLSURWLWHNRþLQDPGHO0HWRGD]XSRUDER
YSRMQHJDPDWHULDOD,62)',6
Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an
absorbent medium (ISO/FDIS 2812-3:2018)
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 3:
Verfahren mit einem saugfähigen Material (ISO/FDIS 2812-3:2018)
Peintures et vernis - Détermination de la résistance aux liquides - Partie 3: Méthode
utilisant un milieu absorbant (ISO/FDIS 2812-3:2018)
Ta slovenski standard je istoveten z: prEN ISO 2812-3
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 2812-3:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 2812-3:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 2812-3:2019
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 2812-3
ISO/TC 35/SC 9
Paints and varnishes — Determination
Secretariat: BSI
of resistance to liquids —
Voting begins on:
2018-12-14
Part 3:
Voting terminates on:
Method using an absorbent medium
2019-03-08
Peintures et vernis — Détermination de la résistance aux liquides —
Partie 3: Méthode utilisant un milieu absorbant
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 2812-3:2018(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 2812-3:2019
ISO/FDIS 2812-3:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 2812-3:2019
ISO/FDIS 2812-3:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus and materials. 2
6 Test substances . 2
7 Sampling . 2
8 Test panels . 2
8.1 Substrate . 2
8.2 Preparation and coating . . 2
8.3 Coating thickness . 2
9 Procedure. 3
9.1 Conditioning of the test panels . 3
9.2 Test conditions . 3
9.3 Determination . 3
10 Evaluation . 3
11 Precision . 4
12 Test report . 4
Annex A (informative) Examples of test substances . 5
Bibliography . 7
© ISO 2018 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 2812-3:2019
ISO/FDIS 2812-3:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
This third edition cancels and replaces the second edition (ISO 2812-3:2012), of which it constitutes a
minor revision. The changes compared to the previous edition are as follows:
— Clause 3 for terms and definitions has been added;
— in Annex A, the CAS numbers have been added to the reagents listed.
A list of all parts in the ISO 2812 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2018 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 2812-3:2019
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 2812-3:2018(E)
Paints and varnishes — Determination of resistance to
liquids —
Part 3:
Method using an absorbent medium
1 Scope
This document specifies a method, using an absorbent medium, for determining the resistance of
an individual-layer or multi-layer system of coating materials to the effects of liquids or paste-like
products.
This method enables the tester to determine the effects of the test substance on the coating and, if
necessary, to assess the damage to the substrate.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 1513, Paints and varnishes — Examination and preparation of test samples
ISO 1514, Paints and varnishes — Standard panels for testing
ISO 2808, Paints and varnishes — Determination of film thickness
ISO 4618, Paints and varnishes — Terms and definitions
ISO 4628-1, Paints and varnis
...