SIST IEC 60839-5-6:2002

Alarm systems - Part 5: Requirements for alarm transmission systems - Section 6: Requirements for voice communicator systems using the public switched telephone network

Specifies the requirements for voice communicator systems using the public switched telephone network which are additional to those specified in IEC 60839-5-1 and IEC 60839-5-2. Covers switched connections providing event driven signalling between an alarm system and a remote centre.

Systèmes d'alarme - Partie 5: Prescriptions pour les systèmes de transmission d'alarme - Section 6: Systèmes de communications vocales utilisant le réseau téléphonique public commuté

Spécifie les prescriptions pour les systèmes de communications vocales utilisant le réseau téléphonique public commuté, qui sont à ajouter aux prescriptions spécifiées dans la CEI 60839-5-1 et la CEI 60839-5-2. Couvre les liaisons commutées assurant la transmission d'un signal d'événément entre un système d'alarme et un centre de surveillance à distance.

Alarm systems - Part 5: Requirements for alarm transmission systems - Section 6: Requirements for voice communicator systems using the public switched telephone network

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-1995
• Withdrawal Date: 20-Jun-2024
• ICS: 13.320 - Alarm and warning systems
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: EAL - Alarm systems
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 21-Jun-2024
• Due Date: 14-Jul-2024
• Completion Date: 21-Jun-2024
• Ref Project: IEC 60811-510:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2002
Alarm systems - Part 5: Requirements for alarm transmission systems - Section 6:
Requirements for voice communicator systems using the public switched
telephone network
Alarm systems - Part 5: Requirements for alarm transmission systems - Section 6:
Requirements for voice communicator systems using the public switched telephone
network
Systèmes d'alarme - Partie 5: Prescriptions pour les systèmes de transmission d'alarme
- Section 6: Systèmes de communications vocales utilisant le réseau téléphonique public
commuté
Ta slovenski standard je istoveten z: IEC 60839-5-6
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

NORME CEI
INTERNATIONALE IEC
60839-5-6
INTERNATIONAL
Première édition
STAN DARD
First edition
1991-04
Systèmes d'alarme
Partie 5:
Prescriptions pour les systèmes de transmission
d'alarme
Section 6: Systèmes de communications
vocales utilisant le réseau téléphonique
public commuté
Alarm systems
Part 5:
Requirements for alarm transmission systems
Section 6: Requirements for voice
communicator systems using the public
switched telephone network
© IEC 1991 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
IEC M ewiyHapo Haa 3nenrporexHHVecnaa HoMHCCHA
Pour prix, voir catalogue en vigueur
• • For price, see current catalogue

IEC - 3 -
839-5-6 ©
CONTENTS
Page
FOREWORD 5
Clause
1 Scope 7
Normative references 7
3 Definitions
4 General considerations 9
5 Requirements 9
6 Test methods
5 -
839-5-6 © IEC -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ALARM SYSTEMS
Part 5: Requirements for alarm transmission systems
Section 6: Requirements for voice communicator systems
using the public switched telephone network
FOREWORD
The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
1)
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use and they are accepted by the National
2)
Committees in that sense.
In order to promote international unification, the IEC expresses the wish that all National Committees
3)
should adopt the text of the IEC recommendation for their national rules in so far as national conditions will
permit. Any divergence between the IEC recommendation and the corresponding national rules should, as
tter.
far as possible, be clearly indicated in the la
This section of the International Standard IEC 839-5 has been prepared by IEC Technical
Committee No. 79: Alarm systems.
The text of this section is based on the following documents:
Six Months' Rule Report on Voting Two Months' Procedure Report on Voting
79(CO)41 79(CO)51
79(CO)23 79(CO)34
Full information on the voting for the approval of this section can be found in the Voting
Reports indicated in the above table.

- 7 -
839-5-6 © IEC
ALARM SYSTEMS
Part 5: Requirements for alarm transmission systems
Section 6: Requirements for voice communicator systems
using the public switched telephone network
1 Scope
This section of IEC 839-5 specifies the requirements for voice communicator systems
using the public switched telephone network which are additional to those specified in
IEC 839-5-1 and IEC 839-5-2.
It covers switched connection providing event driven signalling between an alarm system
and a remote centre. The information will be transmitted using a pre-recorded voice
message to one or more responsible persons successively.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute
provisions of this section of IEC 839-5. At the time of publication, the editions indicated
were valid. All standards are subject to revision, and parties to agreements based on this
section of IEC 839-5 are encouraged to investigate the possibility of applying the most
recent edition of the standards indicated below. Members of IEC and ISO maintain regis-
ters of currently valid International Standards.
IEC 839-5-1: 1991, Alarm systems - Part 5: Requirements for alarm transmission systems -
Section 1: General requirements for systems.
IEC 839-5-2: 1991, Alarm systems - Part 5: Requirements for alarm transmission systems -
Section 2: General requirements for equipment.
3 Definitions
3.1 voice communicator system: Alarm transmission system which transfers
information by means of a pre-recorded voice message over a transmission path
established by automatic dialling via the public switched telephone network.
3.2 responsible person: Person whose function is to receive alarm system information
and initiate the appropriate response measures.

839-5-6 © IEC
- 9 -
4 General considerations
In a voice communicator system, the transmission path is established only at the time an
event requires to be transmitted.
The end-to-end transmission path cannot therefore be continuously monitored although
this may apply to the link between the supervised premises and the first exchange.
Alternatively, a degree of monitoring may be achieved by the initiation of test trans-
missions at suitable intervals.
The ability to establish a connection through the public switched telephone network will be
dependent on the state of the network at the time the event occurs. To increase the
probability of success in establishing a connection, the voice communicator may make
several attempts to call the responsible person or to call alternative recipients.
In type 1 systems, a facility is provided to allow the responsible person to transmit an
acknowledgement signal to the supervised premises. If this signal is not received, the
transmitter will close down and repeat the sequence.
A facility may be included to provide an output signal to the control equipment of the
associated alarm systems in the event of failure of the voice communicator to establish a
connection to the responsible person.
In type 2 systems, no acknowledgement of the correct receipt of the voice message is
provided.
5 Requirements
5.1
Connection to local exchange
A facility shall be provided for monitoring the integrity of the connection
...

IEC 60811-510 ®
Edition 1.0 2012-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric and optical fibre cables – Test methods for non-metallic materials –
Part 510: Mechanical tests – Methods specific to polyethylene and
polypropylene compounds – Wrapping test after thermal ageing in air

Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux
non-métalliques –
Partie 510: Essais mécaniques – Méthodes spécifiques pour les mélanges
polyéthylène et polypropylène – Essai d'enroulement après vieillissement
thermique dans l'air
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: [e-mail].

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: [e-mail].
IEC 60811-510 ®
Edition 1.0 2012-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric and optical fibre cables – Test methods for non-metallic materials –

Part 510: Mechanical tests – Methods specific to polyethylene and

polypropylene compounds – Wrapping test after thermal ageing in air

Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux

non-métalliques –
Partie 510: Essais mécaniques – Méthodes spécifiques pour les mélanges

polyéthylène et polypropylène – Essai d'enroulement après vieillissement

thermique dans l'air
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX H
ICS 29.035.01; 29.060.20 ISBN 978-2-88912-987-4

– 2 – 60811-510  IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test method . 6
4.1 General . 6
4.2 Apparatus . 6
4.3 Sampling . 6
4.4 Ageing procedure . 7
4.5 Test procedure . 7
4.6 Evaluation of results . 7
5 Test report. 7
Bibliography . 8

60811-510  IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –

Part 510: Mechanical tests –
Methods specific to polyethylene and polypropylene compounds –
Wrapping test after thermal ageing in air

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60811-510 has been prepared by IEC technical committee 20:
Electric cables.
This Part 510 of IEC 60811 cancels and replaces Clause 10 of IEC 60811-4-2:2004, which is
withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012.
There are no specific technical changes with respect to the previous edition, but see the
Foreword to IEC 60811-100: 2012.

– 4 – 60811-510  IEC:2012
The text of this standard is based on the following documents:
FDIS Report on voting
20/1306/FDIS 20/1355/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This part of IEC 60811 shall be used in conjunction with IEC 60811-100.
A list of all the parts in the IEC 60811 series, published under the general title Electric and
optical fibre cables – Test methods for non-metallic materials, can be found on the IEC
website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
60811-510  IEC:2012 – 5 –
INTRODUCTION
The IEC 60811 series specifies the test methods to be used for testing non-metallic materials
of all types of cables. These test methods are intended to be referenced in standards for
cable construction and for cable materials.
NOTE 1 Non-metallic materials are typically used for insulating, sheathing, bedding, filling or taping within cables.
NOTE 2 These test methods are accepted as basic and fundamental and have been developed and used over
many years principally for the materials in all energy cables. They have also been widely accepted and used for
other cables, in particular optical fibre cables, communication and control cables and cables for ships and offshore
applications.
– 6 – 60811-510  IEC:2012
ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –

Part 510: Mechanical tests –
Methods specific to polyethylene and polypropylene compounds –
Wrapping test after thermal ageing in air

1 Scope
This Part 510 of IEC 60811 specifies the test method for a wrapping test after thermal ageing
in air. This test method applies specifically to polyolefin insulation in communication cables.
This test is intended for polyolefin insulations of unfilled cables and of dry cores for filled
cables, where the insulation has a wall thickness of less than or equal to 0,8 mm.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
...