oSIST prEN ISO 10750:2008

Footwear - Test method for slide fasteners - Attachment strength of end stops (ISO/DIS 10750:2008)

This method is intended to determine the attachment strength of the top and bottom stops of a slide fastener.  The method is applicable to all types of slide fastener for footwear.

Schuhe - Prüfverfahren für Reißverschlüsse - Befestigungsfestigkeit von Stoppteilen (ISO/DIS 10750:2008)

Die vorliegende Norm beschreibt ein Verfahren zur Bestimmung der Befestigungsfestigkeit von oberen und unteren Begrenzungsteilen eines Reißverschlusses. Das Verfahren gilt für sämtliche Arten von Reißver¬schlüssen für Schuhe.

Chaussures - Méthode d'essai pour les fermetures éclair - Résistance d'attachement des extrémités (ISO/DIS 10750:2008)

Obutev - Preskusna metoda za zadrge - Trdnost pritrditve končnikov pri zadrgi (ISO/DIS 10750:2008)

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Aug-2008
• ICS: 61.040 - Headgear. Clothing accessories. Fastening of clothing
• ICS: 61.060 - Footwear
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 25-Nov-2019
• Due Date: 30-Nov-2019
• Completion Date: 25-Nov-2019
• Ref Project: prEN ISO 10750 - Footwear - Test method for slide fasteners - Attachment strength of end stops (ISO/DIS 10750:2008)

Overview

oSIST prEN ISO 10750:2008 specifies a standardized test method for determining the attachment strength of the end stops (top and bottom) of slide fasteners used in footwear. Developed by the European Committee for Standardization (CEN) and the International Organization for Standardization (ISO), this standard defines procedures to assess the durability and security of slide fastener end stops across all types of footwear applications. Ensuring the reliability of slide fastener components is critical for product safety and consumer satisfaction in the footwear industry.

Key Topics

• Test Methodology: The standard defines three separate methods for evaluating the attachment strength of both top and bottom stops on slide fasteners:
  • Top stop attachment strength: Measures the force required to detach the top stops using a tensile testing machine.
  • Bottom stop attachment strength (slider-stringer method): Assesses the force needed to remove the bottom stops with the slider and stringers configured as per the procedure.
  • Bottom stop attachment strength (stringer-stringer method): Evaluates the bottom stops’ resistance using both stringer ends in a tensile test.
• Applicability: Suitable for all types of slide fasteners used in footwear, including those used in sports shoes, boots, and other footwear products.
• Equipment and Materials: Specifies requirements for the tensile testing machine, including measurement accuracy and jaw separation rate, and detailing test sample preparation and condition.
• Reporting Requirements: Outlines the necessary details to be included in the test report, such as test method, maximum forces recorded, and descriptions of any failures.

Applications

Implementing oSIST prEN ISO 10750:2008 delivers significant value across the footwear manufacturing and quality assessment processes:

• Quality Assurance: Manufacturers use this test method to ensure slide fastener end stops are securely attached, reducing the risk of product failure during use and enhancing the reputation of the finished footwear.
• Product Development: Supports R&D teams in evaluating different fastener designs and materials, optimizing product durability, and meeting market requirements.
• Supply Chain Communication: Provides standardized criteria for evaluating slide fastener components, streamlining communication between footwear brands and component suppliers.
• Compliance and Market Access: Satisfies requirements for conformity assessment in international markets, especially within the European Union, where adherence to harmonized EN ISO standards is often necessary.
• Footwear Testing Laboratories: Enables consistent, repeatable testing procedures that contribute to reliable performance data for certification, product benchmarking, or claims support.

Related Standards

Organizations working with oSIST prEN ISO 10750:2008 may also reference related international footwear standards for comprehensive quality control:

• ISO 7500-1: Metallic materials - Verification of force measuring systems of testing machines
• ISO 17709: Footwear - Sampling location, preparation, and duration of conditioning of samples and test pieces
• ISO 18454: Footwear - Standard atmospheres for conditioning and testing of footwear and components
• EN ISO 19952: Footwear - Test methods for slide fasteners - General performance requirements

Adopting standards like oSIST prEN ISO 10750:2008 enables footwear producers and testing laboratories to maintain high quality and safety benchmarks, comply with international norms, and deliver trusted products to global markets.

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2008
2EXWHY3UHVNXVQDPHWRGD]D]DGUJH7UGQRVWSULWUGLWYHNRQþQLNRYSUL]DGUJL
,62',6
Footwear - Test method for slide fasteners - Attachment strength of end stops (ISO/DIS
10750:2008)
Schuhe - Prüfverfahren für Reißverschlüsse - Befestigungsfestigkeit von Stoppteilen
(ISO/DIS 10750:2008)
Chaussures - Méthode d'essai pour les fermetures éclair - Résistance d'attachement des
extrémités (ISO/DIS 10750:2008)
Ta slovenski standard je istoveten z: prEN ISO 10750
ICS:
61.040 3RNULYDOD'RGDWNLN Headgear. Clothing
REODþLORP6SHQMDQMHREODþLO accessories. Fastening of
clothing
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2008
ICS 61.040
English Version
Footwear - Test method for slide fasteners - Attachment
strength of end stops (ISO/DIS 10750:2008)
Chaussures - Méthode d'essai pour les fermetures éclair -
Résistance d'attachement des extrémités (ISO/DIS
10750:2008)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 309.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 10750:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3

Foreword
This document (prEN ISO 10750:2008) has been prepared by Technical Committee CEN/TC 309 “Footwear”,
the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 "Footwear".
This document is currently submitted to the parallel Enquiry.

DRAFT INTERNATIONAL STANDARD ISO/DIS 10750
ISO/TC 216 Secretariat: AENOR
Voting begins on: Voting terminates on:
2008-04-17 2008-09-17
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Footwear — Test method for slide fasteners — Attachment
strength of end stops
Chaussures — Méthode d'essai pour les fermetures éclair — Résistance d'attachement des extrémités
ICS 61.060
ISO/CEN PARALLEL ENQUIRY
This draft International Standard is a draft standard developed within the European Committee for
Standardization (CEN) and processed under the CEN-lead mode of collaboration as defined in the
Vienna Agreement. The document has been transmitted by CEN to ISO for circulation for ISO member
body voting in parallel with CEN enquiry. Comments received from ISO member bodies, including those
from non-CEN members, will be considered by the appropriate CEN technical body. Should this DIS be
accepted, a final draft, established on the basis of comments received, will be submitted to a parallel two-
month FDIS vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2008

ISO/DIS 10750
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2008 – All rights reserved

ISO/DIS 10750
Contents Page
Foreword .iv
1 Scope.1
2 Normative references.1
3 Principle.1
3.1 Method 1 – Top stop attachment strength.1
3.2 Method 2 – Bottom stop attachment strength (Slider-stringer method).1
3.3 Method 3 – Bottom stop attachment strength (Stringer-stringer method).1
4 Apparatus and materials.
...